Content | - PS 08 but active
- Amplifier: 120Wrms (240 Music)
- Balanced MIC + LINE input with level control
- Balanced LINE outputs
- Treble + Bass Master volume control +
Technical Data
- Amplifier power: 120Wrms / 240Wmusic
- Signal / noise rate: 85dB
- Micro input: 1.5mV @ 20kΩ
- Line input: 1V @ 20kΩ
- Tone controls: +/- 12dB @ 100Hz and 10kHz
- Frequency response: 70 - 20,000Hz
- Woofer: 8 "woofer (20cm)
- Compression Driver / Horn: 1 "voice coil
- Nominal dispersion: 90 ° x 60 ° (HxV)
- Mains Input: 115Vac / 60Hz - 230V AC / 50Hz
- Fuse: 250V 3.15A slow blow (20mm glass)
- Dimensions: 402 x 294 x 220 mm
- Weight: 8kg |
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Processed Active Monitor
200W+ 50W RMS - 124dB SPL
- 200mm (8’’) custom woofer with improved efficiency and linearity
- 200Wrms class D amplifier for LF and 50Wrms for HF.
- Low noise toroidal transformer power supply
- On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
- 2 DSP preset for maximum acoustical flexibility
- Available in white colour 8AW
Code: |
37689 / 37906 White |
Configuration: |
2 way |
Built-in amplifier LF/HF: |
200/50 W RMS |
Built-in amplifier peak LF/HF: |
400/100 W |
Frequency response: |
60Hz - 20KHz -6dB |
Low Frequency woofer: |
8 - 1.7 coil inch |
High Frequency driver: |
1 -1 coil inch |
Maximum SPL cont/peak: |
120/124 dB |
Dispersion: |
90° x 60° HxV |
Input impedance: |
22 Kohm |
Crossover Frequency: |
2.5 KHz |
AC Power requirements: |
160 VA |
Input connector: |
XLR - jack with loop |
Power cord: |
5 / 16.4 m/ft |
Net Dimension (WxHxD): |
255x415x245 - 10.03x16.33x9.64 mm/inch |
Net Weight: |
8.2 / 18.7 Kg/lb |
Transport Dimension (WxHxD): |
330x480x320 - 12.99x18.89x12.59 mm/inch |
Transport Weight: |
9.7 / 21.38 Kg/lb |
| ART 708-A is a powerful and versatile solution for a variety of needs, ranging from small-to-medium-scale indoor concerts to outdoor stage monitoring.
Compact, powerful, and accurately designed to guarantee accurate monitoring and effortless portability, it features a class-D 800 Watt amplifier with innovative DSP sound processing and 8’’ high-power woofer.
APPLICATIONS
- • Nearfield & portable PA
- • Foreground/background PA, distributed PA, frontfill and sidefill
- • Houses of worship, video monitoring, retail, clubs, performance theatre, theme parks
- • Compact voice reinforcement systems
- • Stage monitoring
General Specs
o 127 dB Max SPL
o 800 WATT 2-way peak power
o 90 x 70, Wide dispersion constant directivity horn
o Innovative DSP Processing
o 1" Compression Driver, 1.0" v.c.
o 8" Woofer
o FiRPHASE Technology
Acoustical Specs
• Frequency Response -3 dB: 60 Hz ÷ 20 Hz
• Max SPL: 127 dB
• Horizontal coverage angle: 90°
• Vertical coverage angle: 70°
• Compression Driver: 1“, 1.0" v.c.
• Woofer: 8“, 2" v.c.
Inputs/Outputs
• Input signal: bal / unbal
• Input connectors: XLR male, Jack
• Output connectors: XLR female
• Input sensitivity: -2 dBu / +4 dBu
Processor Section
• Crossover frequencies: 1600 Hz
• Protections: RMS
• Limiter: Soft limiter
• Controls: Volume, Boost, Mic/Line
Amplifier Specifications
Total power: 800 W PEAK
• High frequencies: 200 W PEAK
• Low frequencies: 600 W PEAK
Total power: 400 W RMS
• High frequencies: 100 W RMS
• Low frequencies: 300 W RMS
• Cooling: Convection
• Connections: VDE AC socket
Cabinet Specs
• Cabinet Material: Composite PP
• Hardware: 2xM10 flying p.
• Handles: 1 top
• Pole Mount/Cap: Yes
• Colour: Black
Size/Weight
• Height: 480/18.88 mm/inch
• Width: 291/11.44 mm/inch
• Depth: 276/10.86 mm/inch
• Net Weight: 10.2/22.48 kg/lbs |
User's manual - LDSATG2 [4,73 MB] |
|
|
The LD Systems SAT82AG² is an active installation monitor, which provides a convincing performance on a PC or laptop and as a home studio monitor.
The compact 2-way bass reflex design is equipped with an 8" custom-made woofer and a 1" compression driver which are driven by an 80 Watt Class AB power amplifier. The input is a combo socket; an XLR socket is used to loop through the signal. With a frequency response of 50 Hz - 20 kHz and 114 dB maximum sound pressure, the SAT82AG² produces a balanced sound with high dynamics. The monitor features protection circuits for the tweeter against overcurrent, and a switchable power saving mode that automatically switches to standby if there is no signal for 3 minutes.
The cabinet of the SAT82G² is made of 12mm MDF with M6 flight points and is available in black or white with a durable textured paint finish. A versatile mounting bracket is included; a universal joint mount is available as an accessory.
- Product Type: installation monitor
- Type: active
- Woofer Size: 8“
- Woofer Size: 203.2 mm
- Woofer Magnet: ferrite
- Woofer Brand: custom-made
- HF Driver Size: 1“
- HF Driver Size: 25 mm
- HF Driver Magnet: ferrite
- HF Driver Brand: custom-made
- Amplifier (A): Class A/B
- Dispersion Angle (H x V): 60° x 60°
- Power Output (RMS): 80 W
- Frequency Response: 50 Hz - 20,000 Hz
- Max SPL: 114 dB
- Protection: overcurrent, HF drivers
- Controls: volume, power switch (on/off), power mode (on/auto)
- Indicators: Power, Overload
- Line Input Connectors: 6.3 mm TRS, XLR
- Line Output Connectors: XLR
- Power Supply: transformer
- Operating Voltage: 220 V AC - 240 V AC, 50 - 60 Hz
- Cabinet Material: 12 mm MDF
- Cabinet Surface: textured coating
- Cabinet Colour: black
- Cabinet Type: bass reflex
- Width: 274 mm
- Height: 410 mm
- Depth: 243 mm
- Features: wall bracket
|
|
Frequency response (-3 dB) 1 |
60 Hz to 20 kHz |
Frequency range (-10 dB) 2 |
50 Hz to 20 kHz |
Max. SPL 3 |
121 dB |
Coverage angle (H x V) |
100° x 100° |
Amplifier rating |
400 W |
LF transducer |
8 in. woofer - ferrite magnet |
HF transducer |
1 in. titanium dome, neodymium magnet, ferro-fluid cooled |
Crossover frequency |
2.5 kHz |
Connectors |
2 - XLR/TRS Combo
1 - 3.5mm Stereo
1 - Charge port
1 - TRS footswitch
1 - 12 V DC power output |
Enclosure |
Polypropylene |
Grille material |
Powder coated steel |
USB charging |
1.5 A max., device-dependent |
Color |
Black & white |
Dimensions (H x W x D) |
400 mm x 275 mm x 272 mm
15.75 in. x 10.83 in. x 10.71 in. |
Net weight |
7.6 kg
16.8 lb |
Shipping weight |
11 kg
24.3 lb |
Power consumption 4 |
100 - 240 V~, 50 - 60 Hz, 0.8 - 0.6 A |
Battery capacity |
86.4 Wh |
Battery run time (at max output) 5 |
6+ hours |
Battery run time (at moderate output) 6 |
12+ hours |
1 Full space measurement using music DSP preset.
2 Half-space measurement.
3 Maximum SPL is measured at 1 m using broadband pink noise at maximum output.
4 Current rating is 1/8 power.
5 Maximum output before loudspeaker limit indication, with typical program material.
6 Moderate output is approximately 95 dB SPL, with typical program material.
|
Input Connections: XLR and TRS Combo; XLR with Independent Gain - Power Requirement: 120V: 95V - 132V, 50 - 60 Hz, 0.6A; 230V:190V - 264V, 50 - 60 Hz, 0.4A - Frequency Response: (-3 dB)60 Hz - 20 kHz Hz Full Range Mode - Frequency Response: (-10 dB) 48 Hz - 20 kHz Hz Full Range Mode - Recommended High-Pass Frequency: 100Hz (User Selectable) - Max. SPL/1m (calc): 123 dB - LF Transducer: EV8L, 203mm (8-inch) Driver - HF Transducer: DH2005, 25mm (1-inch) Exit Compression Driver - Crossover Frequency: 1800 Hz - Enclosure Material: High Impact Polystyrene - Grill: Polyester Powder Coated, 18GA Galvanized Steel - Height: 457 mm (17.99 inches) - Width: 282 mm (11.1 inches) - Depth: 264 mm (10.39 inches) - Weight: 8.62 kg (19 lbs) - Shipping Weight: 10.3 kg (22.7 lbs) |
Reviews
There are no reviews yet.