Content |
Antenna Split Box 4-way for all types of wireless microphone systems working in a range between 500.000 and 900.000 MHz.
Product type
Wireless Microphone System Accessories
Type
Antenna Splitter
Frequency band
500 - 900 MHz
Frequency bandwidth
400 MHz
Signal gain
3 dB
Antenna inputs
2
Antenna input connection
TNC
Input impedance
50 Ohm(s)
Power supply for antenna booster
9 V
Antenna outputs
4 x 2
Antenna output connection
TNC
Output impedance
50 Ohm(s)
Power supply for radio receiver
4 x 12 - 18 V DC V
Operating voltage
12 - 18 V DC, 3A
Operating voltage
12 V DC - 18 V DC (100 mA)
Width
482 mm
Height
44.4 mm
Depth
160 mm
Weight
4,672 kg
Accessories (included)
10 x TNC cable, 0.5m , 2 x antenna , 2 x TNC adapter , 4 x DC cable, 0.5m , 4 x Output 600 mA , Plastic case , Power supply
| Directional antenna for setting up larger systems.
- Frequency range: 500 ~ 900 MHz
- Cable and stand not included
This product is compatible with the LDWS100, LDWS1000, LDWIN42 and LDU500 series.
Product type
Wireless Microphone System Accessories
Type
Directional Antennas
Frequency band
500 - 900 MHz
Frequency bandwidth
400 MHz
Impedance
50 Ohm(s)
Antenna gain
7 dBi
Antenna connector
TNC
Threaded connector
5/8 "
Width
290 mm
Height
260 mm
Depth
3 mm
Weight
0,953 kg
Accessories (included)
Adapter 5/8" to 3/8“ |
The IR-300M is a hands-free infrared wireless microphone. It eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms. Since infrared wireless microphone system uses a frequency band that does not interfere with that of the TS-800 and TS-900 series infrared conference system, both systems can be simultaneously installed in the same location.
Battery | IR-200BT-2 rechargeable battery for the infrared wireless microphone (option)
or AA alkaline dry cell battery (2 pieces). | Current Consumption | Typ. 250 mA (2.4 V, Power selector switch: N)
Typ. 340 mA (2.4 V, Power selector switch: H) |
Infrared Emitter
Wavelength | 870 nm (AM: Brightness modulation) | Modulation Method | Frequency modulation | Carrier Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | Transmission Distance | Approx. 20 m (65 ft) (Power selector switch: H, in an unobstructed space)
Approx. 15 m (50 ft) (Power selector switch: N, in an unobstructed space) | Tone Signal | 32.768 kHz | Modulation Sensitivity | ±4.8 kHz (1 kHz, when SPL of 84 dB is input) | Maximum Input Sound Pressure | 120 dB SPL | Input Sensitivity Adjustment | Adjustment range: -9 dB to 0 dB (factory preset: 0 dB) | Microphone Unit | Unidirectional electret condenser microphone | Frequency Response | 100 Hz - 12 kHz | Preemphasis | 300 μs | Input | External microphone input (φ3.5 monaural mini jack) | Battery Operation Time | Approx. 8 h (when the IR-200BT rechargeable battery for the infrared wireless
microphone is used, Power selector switch: N)
Approx. 6 h (when the alkaline battery is used, Power selector switch: N) | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | Operating Humidity | 30 % to 85 %RH | Finish | Control section: ABS resin, metallic gray, paint, 50% gloss
Filter section: Polycarbonate, optical cut filter | Dimensions | 64 (W) × 91.3 (H) ×27.3 (D) mm (2.52" × 3.59" × 1.07“) | Weight | 130 g (0.29 lb) (with battery and strap) | Accessory | Screw driver (for setting) …1, Color label (6 colors) …1 |
|
General Description
Antenna, 490-960MHz, passive, circular polarization
Features
-
High gain
-
Minimized multipath
-
Broadband
Delivery Includes
-
A 5000-CP
-
Adapter BNC to N
-
User manual
|
The Sennheiser NT1-UK power adaptor supplies 12v D.C. regulated power for the Sennheiser ASP 2 passive antenna splitter.
The ASP 2 also powers up to 4 x EM100 / 300 / 500 G2 radio mic receivers and 2 x AB 2 active mast head amplifiers 240 volt A.C. input. (UK 3 pin). The ASP 2 with NT1-UK combination helps reduce Antenna and PSU requirements in a multi receiver system.
Sennheiser NT1-UK Features:
- 12 volt D.C. regulated output, centre pin polarised positive
- 1.5 amp current rating
The Sennheiser NT1-UK power adaptor supplies 12v D.C. regulated power for Sennheiser ASP 2 passive antenna splitter.
| 732.2581 |
Reviews
There are no reviews yet.