LD Systems LDWSECO2X2BPH1 ECO Wireless Microphone System with 2 x Belt Pack and 2 x Headset 863.100 / 864.500 MHz

232.34 incl. GR VAT

Available on backorder

EAN: 4049521138355
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 4-10 d. Available in 4-10 d. SKU: LDWSECO2X2BPH1 Category:
  User’s manual (Receiver) User’s Manual (Transmitter) LD Systems ECO 2X2 BPH 1 Wireless Microphone System with 2 x Belt Pack and 2 x Headset   Set composed of: 1 x LDWSECO2X2R2 1 x LDWSECO2BP2 1 x LDWSECO2BP4 2 x LDWS100MH1 2 Channel Diversity UHF Wireless Set with 2 x Headset Microphone LD Systems ECO […]

 

Read more

 

pdf User’s manual (Receiver)
pdfUser’s Manual (Transmitter)

LD Systems ECO 2X2 BPH 1
Wireless Microphone System with 2 x Belt Pack and 2 x Headset

 

Set composed of:

  • 1 x LDWSECO2X2R2
  • 1 x LDWSECO2BP2
  • 1 x LDWSECO2BP4
  • 2 x LDWS100MH1
2 Channel Diversity UHF Wireless Set with 2 x Headset Microphone

LD Systems ECO Sets are the perfect introduction to wireless audio transmission: All components guarantee optimal audio delivery via professional outputs. The extensive features of the LD WS ECO Series Sets are remarkable in this price category.

The frequency band of 863 – 865 MHz permits operation in most EU countries with no registration or licensing required.

  • 2 channel UHF PLL Diversity Wireless System
  • Headset version
  • Belt Pack with 3 Gain settings and Mute function
  • Long battery life
  • Great operating distance (50 m open field)
  • 2 fixed frequencies: 863.100 MHz and 864.500 MHz
Product type
Wireless Microphone Systems

Type
Headsets

Transmission frequency range
863.1 MHz , 864.5 MHz

LDWS100MH1 – LD Systems WS 100 MH 1 Headset

Product type
Wireless Microphone System Accessories

Directivity
cardioid

Nominal impedance
680 Ohm(s)

Frequency response
20 – 20.000 Hz

Phantom power requierements
5 V

Microphone input
mini-XLR (3-pin, female)

Weight
0,06 kg

Accessories (included)
Foam windscreen

LDWSECO2BP1 – LD Systems ECO 2 BP 1 Belt Pack Transmitter

Type
Belt Packs

Channels
1

Inputs
Mini-XLR (3-pin) with phantom power (for headset)

Frequency response
60 – 16.000 Hz

Rated HF output power
10 mW

Operating time
>10 h (with alkaline batteries)

Other features
incl. batteries

Controls
power (on/off/mute)

Indicators
battery status

Operating voltage
2 x AA battery

Width
65 mm

Height
85 mm

Depth
23 mm

Weight
0,1 kg

LDWSECO2X2R1 – LD Systems ECO 2X2 R 1 Double Receiver

Modulation Type
FM

Channels
2

Antenna inputs
2

Antenna connector
fixed to housing

Noise reduction
squelch

Signal-to-noise ratio
> 105 dB

Audio output, balanced
2 x XLR

Audio mix output, unbalanced
6.3 mm Jack

Controls
2 x volume

Indicators
Power

Operating voltage
External Power Supply

Width
235 mm

Height
44 mm

Depth
118 mm

Weight
0,4 kg

Accessories (included)
power supply

 

 

 

 

 

Weight 2.00 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems LDWSECO2X2BPH1 ECO Wireless Microphone System with 2 x Belt Pack and 2 x Headset 863.100 / 864.500 MHz”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems LDWSECO2X2BPH1 ECO Wireless Microphone System with 2 x Belt Pack and 2 x Headset 863.100 / 864.500 MHz removeSENNHEISER EW D1 ME3 Wireless Headmic Set removeTOA WM-5320A UHF Headset Wireless Microphone removeMASTER AUDIO BE7014T Wireless Microphone System with 2 x Bodypack and 2 x Headset VHF removeLD Systems LDWSECO2X2BPH2 ECO Wireless Microphone System with 2 x Belt Pack and 2 x Headset 863.900 / 864.900 MHz removeLD Systems LDWIN42BPH WIN 42 Series - Wireless Microphone System with Belt Pack and Headset remove
NameLD Systems LDWSECO2X2BPH1 ECO Wireless Microphone System with 2 x Belt Pack and 2 x Headset 863.100 / 864.500 MHz removeSENNHEISER EW D1 ME3 Wireless Headmic Set removeTOA WM-5320A UHF Headset Wireless Microphone removeMASTER AUDIO BE7014T Wireless Microphone System with 2 x Bodypack and 2 x Headset VHF removeLD Systems LDWSECO2X2BPH2 ECO Wireless Microphone System with 2 x Belt Pack and 2 x Headset 863.900 / 864.900 MHz removeLD Systems LDWIN42BPH WIN 42 Series - Wireless Microphone System with Belt Pack and Headset remove
Image
SKULDWSECO2X2BPH1H12SE00340WM-5320ABE7014TLDWSECO2X2BPH2LDWIN42BPH
Rating
Price 232.34 incl. GR VAT 349.00 incl. GR VAT 334.81 incl. GR VAT 79.50 incl. GR VAT 232.34 incl. GR VAT 651.86 incl. GR VAT
Stock

Available on backorder

In stock

In stock (can be backordered)

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

AvailabilityAvailable on backorderIn stockIn stock (can be backordered)Only 1 left in stock (can be backordered)Available on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

 

pdf User's manual (Receiver)
pdfUser's Manual (Transmitter)

LD Systems ECO 2X2 BPH 1
Wireless Microphone System with 2 x Belt Pack and 2 x Headset

 

Set composed of:

  • 1 x LDWSECO2X2R2
  • 1 x LDWSECO2BP2
  • 1 x LDWSECO2BP4
  • 2 x LDWS100MH1
2 Channel Diversity UHF Wireless Set with 2 x Headset Microphone

LD Systems ECO Sets are the perfect introduction to wireless audio transmission: All components guarantee optimal audio delivery via professional outputs. The extensive features of the LD WS ECO Series Sets are remarkable in this price category.

The frequency band of 863 - 865 MHz permits operation in most EU countries with no registration or licensing required.

  • 2 channel UHF PLL Diversity Wireless System
  • Headset version
  • Belt Pack with 3 Gain settings and Mute function
  • Long battery life
  • Great operating distance (50 m open field)
  • 2 fixed frequencies: 863.100 MHz and 864.500 MHz
Product type
Wireless Microphone Systems

Type
Headsets

Transmission frequency range
863.1 MHz , 864.5 MHz

LDWS100MH1 - LD Systems WS 100 MH 1 Headset

Product type
Wireless Microphone System Accessories

Directivity
cardioid

Nominal impedance
680 Ohm(s)

Frequency response
20 - 20.000 Hz

Phantom power requierements
5 V

Microphone input
mini-XLR (3-pin, female)

Weight
0,06 kg

Accessories (included)
Foam windscreen

LDWSECO2BP1 - LD Systems ECO 2 BP 1 Belt Pack Transmitter

Type
Belt Packs

Channels
1

Inputs
Mini-XLR (3-pin) with phantom power (for headset)

Frequency response
60 - 16.000 Hz

Rated HF output power
10 mW

Operating time
>10 h (with alkaline batteries)

Other features
incl. batteries

Controls
power (on/off/mute)

Indicators
battery status

Operating voltage
2 x AA battery

Width
65 mm

Height
85 mm

Depth
23 mm

Weight
0,1 kg

LDWSECO2X2R1 - LD Systems ECO 2X2 R 1 Double Receiver

Modulation Type
FM

Channels
2

Antenna inputs
2

Antenna connector
fixed to housing

Noise reduction
squelch

Signal-to-noise ratio
> 105 dB

Audio output, balanced
2 x XLR

Audio mix output, unbalanced
6.3 mm Jack

Controls
2 x volume

Indicators
Power

Operating voltage
External Power Supply

Width
235 mm

Height
44 mm

Depth
118 mm

Weight
0,4 kg

Accessories (included)
power supply
 

 

 

 

 

Evolution wireless D1 is a digital sound transmission system that makes no compromises when it comes down to reliability, sound quality or user-friendliness. ew D1 is the number one for every gig and live event when you need to simply rely on pure brilliance. It can run up to 15 output lines in parallel and independently adjust the sensitivity of every transmission.

The WM-5320A wireless microphone has been manufactured for use with a UHF system. It incorporates a cardioid pick-up pattern and has been designed for use in speech reinforcement applications. The built-in compressor-expander circuit minimizes the influence from ambient noise. It's gooseneck can be adjusted to any desired angle to facilitate use. The WM-5320A also features the function to protect it from the user's sweat.

Specification
Case
Modulation Frequency modulation
Frequency Range 636 - 865 MHz*, UHF
Channel Selectable 64 channels (the number of channels may differ from country to country)
RF Carrier Power 50 mW or less
Tone Frequency 32.768 kHz
Oscillator PLL synthesized
Maximum Input Level 120 dB SPL
Battery LR6 (AA)
Battery Life 10 hours or more (alkaline)
Indicator Power/Battery lamps
Antenna Built-in type
Finish Resin, coating
Dimensions 62 (W) × 102.5 (H) × 23 (D) mm
Weight 90 g (with battery)
Headset
Microphone Element Electret condenser microphone, cardioid
Cable Length 1.4 m
Connector φ3.5 plug (EIAJ RC701)
Accessory Waist pouch……1, Screw driver……1

 

- Dual channel receiver - High quality receiving signal - Mix output jack 6.3 + two separated balanced outputs XLR (channel A + B) - Two head set transmitters included (2*1.5V power supply)

pdfUser's manual (Receiver)
pdfUser's Manual (Transmitter)

LD Systems ECO 2X2 BPH 2
Wireless Microphone System with 2 x Belt Pack and 2 x Headset

2 Channel Diversity UHF Wireless Set with 2 x Headset Microphone

LD Systems ECO Sets are the perfect introduction to wireless audio transmission#/b: All components guarantee optimal audio delivery via professional outputs. The extensive features of the LD WS ECO Series Sets are remarkable in this price category.

The frequency band of 863 - 865 MHz permits operation in most EU countries with no registration or licensing required.

  • 2 channel UHF PLL Diversity Wireless System
  • Headset version
  • Belt Pack with 3 Gain settings and Mute function
  • Long battery life
  • Great operating distance (50 m open field)
  • 2 fixed frequencies: 863.900 MHz and 864.900 MHz

Set composed of:

  • 1 x LDWSECO2X2R2
  • 1 x LDWSECO2BP2
  • 1 x LDWSECO2BP4
  • 2 x LDWS100MH1

Product type
Wireless Microphone Systems

Type
Headsets

Transmission frequency range
863.9 MHz , 864.9 MHz

LDWS100MH1 - LD Systems WS 100 MH 1 Headset

Product type
Wireless Microphone System Accessories

Directivity
cardioid

Frequency response
20 - 20.000 Hz

Nominal impedance
680 Ohm(s)

Phantom power requierements
5 V

Microphone input
mini-XLR (3-pin, female)

Weight
0,06 kg

Accessories (included)
Foam windscreen

LDWSECO2BP2 - LD Systems ECO 2 BP 2 Belt Pack Transmitter

Type
Belt Packs

Channels
1

Inputs
Mini-XLR (3-pin) with phantom power (for headset)

Frequency response
60 - 16.000 Hz

Rated HF output power
10 mW

Operating time
>10 h (with alkaline batteries)

Other features
incl. batteries

Controls
power (on/off/mute)

Indicators
battery status

Operating voltage
2 x AA battery

Width
65 mm

Height
85 mm

Depth
23 mm

Weight
0,1 kg

LDWSECO2X2R2 - LD Systems ECO 2X2 R 2 Double Receiver

Modulation Type
FM

Channels
2

Antenna inputs
2

Antenna connector
fixed to housing

Noise reduction
squelch

Signal-to-noise ratio
> 105 dB

Audio output, balanced
2 x XLR

Audio mix output, unbalanced
6.3 mm Jack

Controls
2 x volume

Indicators
Power

Operating voltage
External Power Supply

Width
235 mm

Height
44 mm

Depth
118 mm

Weight
0,4 kg

Accessories (included)
power supply
   

 Frequency list 2016 [579,1 KB]
 Battery disposal information [77,1 KB]
 Frequency list [88,3 KB]
 User's manual [10,22 MB]
 EC Declaration of Conformity [292,6 KB]

 

Set composed of:

  • 1 x LDWIN42R
  • 1 x LDWIN42BP
  • 1 x LDWS100MH1

Due to the changed situation in the area of general frequency allocations for the operation of wireless systems starting in 2015, LD Systems decided to develop the even more flexible and highly professional WIN 42 wireless system.

With its outstanding audio quality, the LD Systems WIN 42 UHF system offers numerous potential applications for live performances and permanent installations. The working UHF frequency range is 734 MHz to 776 MHz. Both the handheld microphone and belt pack transmitter versions provide any vocalist, speaker or instrumentalist optimal transmission of his or her performance with the greatest possible freedom of movement. By means of a threaded connection, the microphone head of the handheld transmitter can be swapped quickly and easily (dynamic and condenser capsules).

The system has more than 1680 freely selectable frequencies and thus makes it possible to operate up to 20 systems simultaneously. The "channel scan" function assists you in finding and tuning to a transmission frequency without interference. This frequency is then transmitted simply and conveniently from receiver to transmitter via an infrared link. The transmitting power is adjustable in 3 stages (10, 30, 50 mW) directly on the microphone, permitting adaptation to any environment.

The half-rack True Diversity receiver houses numerous system features, for example, a transmitter battery status indicator on the receiver display, an indicator for the (transmitter) "Mute On/Off" function on the receiver display, 4 EQ presets that are switchable at the receiver, and much more. A highly professional system embodying the outstanding value-for-money that is so typical for LD Systems.

  • UHF frequency range 734 - 776 MHz
  • 1680 frequencies
  • 20 groups with 577 fixed frequencies
  • user bank with 1680 freely selectable frequencies in 25 kHz increments
  • 255 addresses selectable
  • channel scan
  • true diversity receiver
  • interchangeable microphone capsules (dynamic / condenser)

Receiver display

  • volume
  • radio frequency level antenna A/B
  • audio level
  • battery status of transmitter
  • transmitter sync via infrared
  • squelch setting in menu
  • equalizer setting in menu
  • naming template in menu
  • 10 sets storable
  • lockable menu
  • balanced XLR output, unbalanced 6.3 mm jack
  • adjustable output
  • adjustable headphone output
Transmitter Display
  • battery status
  • RF power
  • AF power
  • additional system information
Technical Specifications WIN42 Receiver
  • Model Name: LDWIN42R
  • Channels: 1680 (20 groups + 1 user group)
  • Frequency range: 734 - 776 MHz
  • Audio Frequency response: 60 Hz - 16 kHz
  • THD:
  • Signal/Noise ratio: >100 dB
  • Audio Output: XLR balanced / 6,3 mm Jack unbalanced
  • Power Supply: external power adapter 13,5 V DC, 500 mA
  • Dimensions (W x H x D): 212 x 44 x 184 mm
Technical Specifications Handheld Transmitter
  • Model Name: LDWIN42MD
  • Channels: 1680
  • Frequency range: 734 - 776 MHz
  • Audio Frequency response: 60 Hz - 16 kHz
  • RF output power: adjustable 10 mw / 30 mw / 50 mw
  • Power requirement: 2 x AA size batteries
  • Operating time: >13 h with alkaline batteries
  • Dimensions (L x Ø): 255 x 52 mm
Technical Specifications Beltpack Transmitter
  • Model Name: LDWIN42BP
  • Channels: 1680
  • Frequency range: 734 - 776 MHz
  • Audio Frequency response: 60 Hz - 16 kHz
  • RF output power: adjustable 10 mw / 30 mw / 50 mw
  • Input Connector: mini XLR 3-pole (phantom power for headset)
  • Power requirement: 2 x AA size batteries
  • Operating time: >14 h with alkaline batteries
  • Dimensions (W x H x D): 87 x 25 x 63 mm
Weight2.00 kg2.00 kg0.90 kg1.2 kg2.00 kg3.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.00 kg
Weight 2.00 kg
Weight 0.90 kg
Weight 1.2 kg
Weight 2.00 kg
Weight 3.50 kg