LD Systems Contractor CFL 52 – 5.25″ 40W frameless 2-way in-wall speaker

64.51 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The Contract CFL 52 is a frameless in-wall speaker for especially discreet installation in walls. The 5.25″ woofer and 1.2″ tweeter are protected by a nearly flush front grille with magnetic mount. Its frequency response extends to 20 kHz; the sound pressure level is 88 dB at 1 W /1 m, with a power capacity […]

 

Read more

The Contract CFL 52 is a frameless in-wall speaker for especially discreet installation in walls. The 5.25″ woofer and 1.2″ tweeter are protected by a nearly flush front grille with magnetic mount. Its frequency response extends to 20 kHz; the sound pressure level is 88 dB at 1 W /1 m, with a power capacity of 40 watts of continuous power. The CFL 52 impresses with excellent sound and high speech intelligibility. Secure swivels enable fast and easy assembly. The in-wall speaker is designed for a wide scope of applications, providing an unobtrusive sound in hotels, restaurants, bars, lounges, training and conference rooms, shopping centres and even at home.

For ELA systems, the CFL 52 is available as a 100 Volt version (CFL 52 100 V) with three taps for 1.5 to 6 watts.

  • Product Type: in-wall speaker
  • Type: passive
  • Version: wall installation speaker
  • Speaker Type: 2-way speaker
  • Colour: black, white grille
  • Woofer Size: 5.25“
  • Woofer Size: 133 mm
  • Tweeter Size: 1.2“
  • Tweeter Size: 30 mm
  • Opening Size: 178 mm
  • Mounting Depth: 77 mm
  • Min. Material Thickness: 3 mm
  • Max. Material Thickness: 15 mm
  • Impedance (low-impedance): 8 ohms
  • 100 V Inputs: n/a
  • Low-impedance Rated Load (RMS): 40 W
  • Sensitivity (1 W / 1 m): 88 dB spl
  • Frequency Response: 80 Hz – 20 kHz
  • Depth: 81 mm
  • Diameter: 204 mm
Weight 1.50 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems Contractor CFL 52 – 5.25″ 40W frameless 2-way in-wall speaker”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems Contractor CFL 52 - 5.25" 40W frameless 2-way in-wall speaker removeJBL Control 312CS 12” In-Ceiling Subwoofer removePOLK AUDIO SC6S 20-100 W/ch In-Ceiling speaker removeJBL CONTROL 321C 12" Coax Speaker, 250 Watts, 34Hz-18kHz removePOLK AUDIO RC80i 20-100 W/ch In-Ceiling speaker PAIR removePOLK AUDIO RC60i 20-100 W/ch In-Ceiling speaker PAIR remove
NameLD Systems Contractor CFL 52 - 5.25" 40W frameless 2-way in-wall speaker removeJBL Control 312CS 12” In-Ceiling Subwoofer removePOLK AUDIO SC6S 20-100 W/ch In-Ceiling speaker removeJBL CONTROL 321C 12" Coax Speaker, 250 Watts, 34Hz-18kHz removePOLK AUDIO RC80i 20-100 W/ch In-Ceiling speaker PAIR removePOLK AUDIO RC60i 20-100 W/ch In-Ceiling speaker PAIR remove
Image
SKULDCFL52CONTROL 312CSSC6SCONTROL 321CRC-80iRC-60i
Rating
Price 64.51 incl. GR VAT 384.00 incl. GR VAT178.99 incl. GR VAT 571.00 incl. GR VAT249.00 incl. GR VAT209.00 incl. GR VAT
Stock

Available on backorder

In stock

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderIn stockIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe Contract CFL 52 is a frameless in-wall speaker for especially discreet installation in walls. The 5.25" woofer and 1.2" tweeter are protected by a nearly flush front grille with magnetic mount. Its frequency response extends to 20 kHz; the sound pressure level is 88 dB at 1 W /1 m, with a power capacity of 40 watts of continuous power. The CFL 52 impresses with excellent sound and high speech intelligibility. Secure swivels enable fast and easy assembly. The in-wall speaker is designed for a wide scope of applications, providing an unobtrusive sound in hotels, restaurants, bars, lounges, training and conference rooms, shopping centres and even at home. For ELA systems, the CFL 52 is available as a 100 Volt version (CFL 52 100 V) with three taps for 1.5 to 6 watts.
  • Product Type: in-wall speaker
  • Type: passive
  • Version: wall installation speaker
  • Speaker Type: 2-way speaker
  • Colour: black, white grille
  • Woofer Size: 5.25“
  • Woofer Size: 133 mm
  • Tweeter Size: 1.2“
  • Tweeter Size: 30 mm
  • Opening Size: 178 mm
  • Mounting Depth: 77 mm
  • Min. Material Thickness: 3 mm
  • Max. Material Thickness: 15 mm
  • Impedance (low-impedance): 8 ohms
  • 100 V Inputs: n/a
  • Low-impedance Rated Load (RMS): 40 W
  • Sensitivity (1 W / 1 m): 88 dB spl
  • Frequency Response: 80 Hz - 20 kHz
  • Depth: 81 mm
  • Diameter: 204 mm

Features:


  • Desinged for systems utilizing an external active subwoofer crossover, separate amplifier channel for the subwoofer loudspeaker.
  • Includes Kevlar-reinforced 300 mm (12 inch) subwoofer driver woofer with 75 mm (3 inch) voice-coil.
  • High power handling of 400 Watts with high sensitivity provides high SPL capability.
  • The innovative EZRail™ feature built into the metal baffle temporarily holds one side of the speaker baffle in place until the installer can affix the baffle to the backcan with screws.

    Specifications:

  • Frequency Response 30 Hz - 4.5 kHz, -10dB
  • Maximum Power Handling 600 Watts, long term
  • 1000 Watts, 2 hrs. (pink noise)
  • Impedance 8 Ohms
  • SPL 121dB continuous, 124dB peak, long term
  • Beamwidth Not Applicable
  • Horizontal Beamwidth Not Applicable
  • Vertical Beamwidth Not Applicable
  • Directivity Not Applicable
  • Construction Kevlar Reinforced Cone
  • Magnet Saturated-gap
  • Voice Coil 3"
  • Dimensions (HxWxD) 14.4 x 14.4 x 6.3" (366 x 366 x 160mm)
  • Weight 17 lb (7.7 kg)
  • Driver Complement
    Mid/Woofer     1 - 6-1/2" Diameter (16.51cm)
    Dynamic Balance polymer composite cone driver
    Tweeter     2 - 3/4" Diameter (1.91cm)
    Silk Dome Tweeters
    Electrical
    Overall Frequency Response     40Hz-20kHz
    Lower -3dB Limit     55Hz
    Upper -3dB Limit     20kHZ
    Nominal Impedance     8 ohms
    Recommended Amplifier Power     20 - 100 w/channel
    Efficiency     89 dB
    Dimensions
    Overall Diameter     8-15/16“(22.70cm)
    Cut-out Diameter     7-5/8“(19.37cm)
    Mounting Depth
    (assumes 1/2" [12.7mm] wall material)     2-5/8" (6.67cm)
    Overall Depth     3-1/8" (7.94cm)
    Shipping/Other      
    Shipped As     each
    Product Weight     2.55 lbs. (1.16kgs) each
    Total Shipping Weight     3.00 lbs. (1.36kgs)
    Speaker Warranty     Lifetime Warranty

    • Frequency Range (-10 dB) : 34 Hz – 18 kHz In half space (in ceiling)
    • Frequency Response (±3 dB) : 47 Hz – 16 kHz In half space (in ceiling)
    • Coverage Pattern : 90° conical, broadband (Avg 1k - 16kHz) Average 1 kHz to 10 kHz
    • Directivity Factor (Q) : 8.7 (1k - 16kHz)
    • Directivity Index (DI) : 9.4 dB (1k - 16kHz)
    • Long-Term System : 250 W (1000 W peak), 2 hrs
    • Power Rating, IEC3 : 150 W (600 W peak), 100 hrs
    • Sensitivity (2.83V@ 1m) : 94 dB measured half-space, 99 dB computed for competitive comparison
    • Maximum SPL6 : 118 dB cont ave (124 dB peak)
    • Crossover Network : 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF.
    • Nominal Impedance : 8 ohms
    • Transducer Low Frequency Driver : Kevlar reinforced cone, 50 mm (2 in) voice coil.
    • Transducer High Frequency Driver : JBL 2412H-1 compression driver, 25 mm (1 in) voice coil.
    • Input Connector : Removable locking connector with screw-down terminals. Max wire 12 AWG (2.5 mm2)
    • Dimensions (H x W x D) : 366 x 366 mm (14.4 x 14.4 in) square baffle x depth from back of baffle of 223 mm (8.8 in) on 321C
    • Net Weight : 16.0 lbs. (7.3 kg)
    • Shipping Weight : 19.4 lbs. (8.8 kg)

    1 x 8¨ Mineral Filed Polymer Cone
    1 x 1¨ Soft Dome Tweeter in swivel
    mount
    Amplifier Power 20-100 W/ch
    Impedance 8 Ohms
    Sensitivity 90Db
    Dimensions (cm) 27 x 9

    In-Ceiling Audiophile Magic


    RC60i's round profile looks just like a lighting fixture so it will blend into your ceiling without calling attention to itself. But they sound sooooo much better than your typical in-ceiling speakers that resemble a watering spout.



    RC60i Features:


    • Easy one-cut, drop-in installation puts built-in audio within reach, with Perfect Fit templates, a precision flange, and (available) pre-construction brackets.

    • RCi speakers utilize the "virtual enclosure" of your in-wall and in-ceiling space to enhance their bass response and smooth low frequency blending with the midrange.

    • Lightweight and stiff blue polymer cones deliver excellent damping and bass response.

    • Durable, computer-modeled, injection-molded butyl rubber surrounds suppress unwanted cone resonances for a lifetime of reliable sound.

    • Aimable swivel tweeters for greater accuracy and more realistic imaging. (All models except RC6s.).

    • Rustproof stainless steel hardware, durable butyl rubber surrounds and powder coated aluminum (in-ceiling) & painted steel (in-wall) grilles make RCi Series speakers suitable for high moisture areas like bathrooms or even under eaves of an enclosed porch. (RCi series are not suitable for exposed outdoor use).

    • RCi speakers have paintable grilles and practically disappear into any room.

    • RCi Series speakers are timbre-matched to other Polk speakers to insure utterly seamless blending from speaker to speaker in systems that combine traditional and built-in speakers.
    Dimensions - Cut-Out Diameter 7 5/8 (19.37cm) "
    Dimensions - Mounting Depth (includes 1/2 drywall)“ 2 3/8 (6.03cm) "
    Dimensions - Overall Depth 2 7/8 (7.30cm) "
    Dimensions - Overall Diameter 9 (22.86cm) "
    Dimensions - Pre-Construction Bracket PB 60
    Driver Complement Mid / Woofer - Diameter 6 1/2 (16.51cm) "
    Driver Complement Mid / Woofer - Quantity 1
    Driver Complement Mid / Woofer - Type Dynamic Balance driver with mineral-filled polymer cone and rubber surround
    Driver Complement Tweeter - Diameter 3/4 (1.91cm) "
    Driver Complement Tweeter - Quantity 1
    Driver Complement Tweeter - Type Dynamic Balance tweeter with metalized soft dome in ball-and-socket swivel mount
    Electrical - Efficiency 89 dB
    Electrical - Inputs Spring-loaded clips
    Electrical - Lower -3dB Limit 60 Hz
    Electrical - Nominal Impedance 8 ohms
    Electrical - Recommended Amplifier Power 20 - 100 watts per channel
    Electrical - Total Frequency Response 40Hz - 20kHz
    Electrical - Upper -3dB Limit 20 kHz
    Shipping - Total Shipping Weight 6 pounds
    Shipping - Unit of Measure pair
    Warranty - Speaker Warranty Lifetime
    Weight1.50 kg7.70 kg1.36 kg8.80 kg5.00 kg3.00 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 1.50 kg
    Weight 7.70 kg
    Weight 1.36 kg
    Weight 8.80 kg
    Weight 5.00 kg
    Weight 3.00 kg