| Content |
The Contractor CWMS 52 is a wall speaker with an appealing look equipped with a 5.25" woofer and a 1.2" tweeter. Its frequency response extends to 20 kHz; the sound pressure level is 88 dB at 1 W /1 m. The CWMS 52 provides 30 watts of continuous power and is characterised by a high degree of speech intelligibility. It is designed for a wide scope of applications, providing an unobtrusive sound in hotels, restaurants, bars, lounges, training and conference rooms, shopping centres and at home. It is available in white (CWMS 52 W) and black (CWMS 52 B).
For ELA systems, both versions are also available as 100 Volt versions (CWMS 52 W 100 V, CWMS 52 B 100 V).
As bass extension, we recommend the CIW SUB 10.
- Product Type: installation speakers
- Type: passive
- Version: wall speaker
- Speaker Type: 2-way speaker
- Colour: white
- Woofer Size: 5.25“
- Woofer Size: 133 mm
- Tweeter Size: 1.2“
- Tweeter Size: 30 mm
- Impedance (low-impedance): 8 ohms
- 100 V Inputs: 1,25W, 2,5W, 5W, 10W
- Low-impedance Rated Load (RMS): 30 W
- Sensitivity (1 W / 1 m): 88 dB spl
- Frequency Response: 80 Hz - 20 kHz
- Dimensions (W x H x D): 294 x 180 x 160 mm
|
The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.
| BS-33AT | | | Rated Input: | 6W (100V line), 3W (70V line) | | Rated Impedance: | 100V line: 1.7kΩ (6W), 3.3kΩ (3W) | | Sensitivity: | (1W, 1m): 91dB | | Frequency Response: | 120 – 15,000Hz (–20dB) | | Speaker Component: | 5" (12cm) cone-type | | Applicable Cable: | 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14) 7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16) | | Connetion: | Push-in connector (bridging terminal) | | Attenation Level: | 3W: OFF, 1 (–12dB), 2 (–6dB), 3 (0dB) 6W: OFF, 1 (–13dB), 2 (–7dB), 3 (0dB) | | Operating Temperature: | –10°C to 50°C (14°F to 122°F) | | Finish: | Case: ABS resin, off-white | | Rear bord: | Hard board | | Dimensions: | 173 (W) × 195 (H) × 101 (D) mm(6.81" × 7.68" × 3.98“) (excluding volume control) | | Wall Mounting Case front mount: | 184mm (7.24“) | | Dimensions: | Fixing hole mount: 120mm (4.72“) | | Weight: | 810g (1.79 lb) | | Accessory: | Speaker mounting screw (4 × 35 (0.16" x 1.38“)) × 2, Speaker mounting screw (4 × 16 (0.16" x 0.63“)) × 2 |
| The JBL Control 128W premium in-wall speaker designed for applications where top performance is required. The high performance 8 inch wooer features apolymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other aimable tweeter designs.
JBL Control 128W at a Glance:
- 30 Hz - 20 kHz frequency range.
- 120W continuous program (60W cont. pink, 240W cont. peak).
- 90 dB sensitivity (1W/1m).
- High-slope crossover network produces natural sound and even coverage.
- Optional MTC-128RIF Rough-In-Frame for new construction installation to wallstuds.
| Premium in-wall speaker designed for applications where top performance is required. The high performance 6-1/2 inch woofer features a polymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other multidirectional tweeter designs.
Features:
- Frequency Response: 38 Hz - 20 kHz
- 100W continuous program (50W cont. pink, 200W cont.peak)
- 88 dB sensitivity (1W/1m)
- High-slope crossover network produces natural sound and even coverage.
- Optional MTC-126RIF Rough-In-Frame for new construction installation to wallstuds.
|
BS-1030B and BS-1030W Music/Paging Speakers
The TOA BS-1030 Music/Paging Speaker has exceptional sound quality and value for a wide variety of applications. Available in black and white, the versatile BS-1030 is designed for both indoor and outdoor use with a durable ABS resin enclosure and steel mesh grille. The two-way, bass-reflex design features a 4.72" (12 cm) cone woofer, 1" (2.5 cm) dome tweeter and built-in multi-tap transformer with screwdriver-adjustable power taps. A transformer bypass setting allows direct 8-ohm operation. Installation is fast and easy with the supplied mounting bracket or rear panel keyholes for horizontal or vertical surface-mounting. The BS-1030 speakers are backed with a five year warranty.
Also see the new FB-100 and HB-1 Subwoofers.
FEATURES:
Indoor and Outdoor Applications Mounting Bracket Included Paintable Enclosure Two-Way, Bass-Reflex Design 70.7/100 V and 8-Ohm Screwdriver-Adjustable Tap Settings Black (BS-1030B) and White (BS-1030W) |
The BS-634 and BS-634T are wall-mount speakers matched with a supplied plug-in speaker receptacle, for easy installation. The 6W
rated input BS-634/634T are 5" (12cm) cone-type speakers. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. A selectable attenuation function is provided on the BS-634T. The speaker enclosureʼs design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible.Enclosure and grille net colour is off-white. |
Reviews
There are no reviews yet.