LD Systems X 223 Active Crossover Stereo 2Way / 3Way Mono

150.00 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: 4049521109195
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 4-10 d. Available in 4-10 d. SKU: LDX223 Category:
The LD Systems X223 is a stereo 2 way / mono 3 way crossover in standard 19″/1U rack format. Its rugged construction, high quality and robust knobs as well as the integrated power unit are rarities in this price range. It provides a mono sub output, an adjustable crossover frequency for each channel, adjustable LF/HF […]

 

Read more

The LD Systems X223 is a stereo 2 way / mono 3 way crossover in standard 19″/1U rack format. Its rugged construction, high quality and robust knobs as well as the integrated power unit are rarities in this price range. It provides a mono sub output, an adjustable crossover frequency for each channel, adjustable LF/HF and input gains, phase reverse controls, switchable 40 Hz High-Pass filters and symmetrical XLR In- and Outputs. With the LD Systems X223 you get a crossover fulfilling the professional standards and offering great quality and sound characteristics.
Product type
Signal Processors
Version
2-way stereo/3-way mono
Frequency response
20 – 20.000 Hz
Dynamic range
106 dB
Signal-to-noise ratio
> 93 dB
Total Harmonic Distortion (THD)
< 0.004 %
Crosstalk
< – 80 (20 – 20.000 Hz) dB
Max. input level
+21 (balanced or unbalanced) dBu
Max. output level
+21 (balanced or unbalanced) dBu
Input impedance (kOhms)
50000 kOhm
Output impedance
200 Ohm(s)
Controls
2 x crossover frequency low/high, 2 x crossover low/mid, 2 x high gain, 2 x highpass (40 Hz), 2 x input gain, 2 x low gain, 2x frequency switch x1/x10, 4 x inv switch, LF sum, Mono/stereo mode
Indicators
2 x clip, 2 x crossover x 10, 2 x highpass, 4 x inv., mono, stereo
Line inputs
2
Line input connectors
XLR
Line outputs
4
Line output connectors
XLR
Mains connector
IEC socket
Operating voltage
220 V AC – 240 V AC
Width
482 mm
Height
44.5 mm
Depth
153 mm
Weight
2,6 kg

 

 

 

Weight 2.60 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems X 223 Active Crossover Stereo 2Way / 3Way Mono”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems X 223 Active Crossover Stereo 2Way / 3Way Mono removeARX EC-2 STEREO 2WAY-MONO 3WAY 24dB ACTIVE CROSSOVER removeDYNACORD DSP-244 DSP Controller Speaker System removeBEHRINGER CX3400 V2 3-Way Stero/4-Way Mono Frequency Crossover with Limiters removeDBX DRIVE RACK PA2 SIGNAL PROCESSOR 2IN/6OUT removeELECTRO VOICE DC-One Two-In-Six-Out Loudspeaker Processor remove
NameLD Systems X 223 Active Crossover Stereo 2Way / 3Way Mono removeARX EC-2 STEREO 2WAY-MONO 3WAY 24dB ACTIVE CROSSOVER removeDYNACORD DSP-244 DSP Controller Speaker System removeBEHRINGER CX3400 V2 3-Way Stero/4-Way Mono Frequency Crossover with Limiters removeDBX DRIVE RACK PA2 SIGNAL PROCESSOR 2IN/6OUT removeELECTRO VOICE DC-One Two-In-Six-Out Loudspeaker Processor remove
Imagebehringer crossover 2-3way active limiter stereo mono
SKULDX223EC-2DSP-244E005259DBX DRIVE RACK PA2E007349
Rating
Price 150.00 incl. GR VAT 422.88 incl. GR VAT 1,598.89 incl. GR VAT 164.91 incl. GR VAT 509.00 incl. GR VAT860.00 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

AvailabilityOnly 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)Available on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • 31-Band graphic equaliser
  • 8-Band parametric input EQ with auto EQ function
  • Limiter
  • Crossover
  • Compressor
  • Subharmonic synthesiser
  • Output delay up to 3.4 m/10 ms
  • Input delay up to 34 m/100 ms
  • Feedback suppressor with 12 notch filters 1/80 octave
  • 8-Band parametric output EQ also for speaker tuning
  • 1/3 Octave band real time analyser
  • Pink noise generator
  • Remote control via Mac/Windows/Android/iOS
  • 2 XLR inputs
  • XLR input with 48 V phantom power for optional measuring microphone
  • 6 XLR outputs male
  • Ethernet connection
  • USB connection
  • Format: 19" / 1 U
ContentThe LD Systems X223 is a stereo 2 way / mono 3 way crossover in standard 19"/1U rack format. Its rugged construction, high quality and robust knobs as well as the integrated power unit are rarities in this price range. It provides a mono sub output, an adjustable crossover frequency for each channel, adjustable LF/HF and input gains, phase reverse controls, switchable 40 Hz High-Pass filters and symmetrical XLR In- and Outputs. With the LD Systems X223 you get a crossover fulfilling the professional standards and offering great quality and sound characteristics.
Product type
Signal Processors
Version
2-way stereo/3-way mono
Frequency response
20 - 20.000 Hz
Dynamic range
106 dB
Signal-to-noise ratio
> 93 dB
Total Harmonic Distortion (THD)
< 0.004 %
Crosstalk
< - 80 (20 - 20.000 Hz) dB
Max. input level
+21 (balanced or unbalanced) dBu
Max. output level
+21 (balanced or unbalanced) dBu
Input impedance (kOhms)
50000 kOhm
Output impedance
200 Ohm(s)
Controls
2 x crossover frequency low/high, 2 x crossover low/mid, 2 x high gain, 2 x highpass (40 Hz), 2 x input gain, 2 x low gain, 2x frequency switch x1/x10, 4 x inv switch, LF sum, Mono/stereo mode
Indicators
2 x clip, 2 x crossover x 10, 2 x highpass, 4 x inv., mono, stereo
Line inputs
2
Line input connectors
XLR
Line outputs
4
Line output connectors
XLR
Mains connector
IEC socket
Operating voltage
220 V AC - 240 V AC
Width
482 mm
Height
44.5 mm
Depth
153 mm
Weight
2,6 kg
     

The ARX EC-2 is a flexible yet affordable 24 dB per octave Phase Correct active crossovers.
It has 2 modes of operation; as either Stereo 2 way or a Mono 3 way units, with a switch on
the back panel selecting either mode.

Features
Ultra low noise circuitry
Totally phase aligned at crossover point
Switchable Dual Channel 2 way or Single Channel 3 way
Unique 'semi-fixed' crossover point
24dB per octave (Fourth Order) Linkwitz-Riley filters
Separate Summed Mono Output
Balanced Inputs and Outputs
Built in High Pass filters
Intuitive, 'user friendly' layout
Flawless performance in any audio environment

Tamper-Proof Crossover Points
The crossover points are determined internally by the value of 4 resistors per channel; changing
the resistor value changes the crossover point. This 'semi fixed' method avoids the pitfalls of
externally adjusted crossover points, making the crossover points tamper-proof once they are set.
Idle fingers can't fiddle with the crossover points and create havoc with the system!
As a handy guide, a list of common crossover points and their corresponding resistor values are
printed inside the unit's lid, and also set out in the Owner's Manual.
On the front panel are level controls for Low and High in dual channel 2 way mode, and Low, Mid
and High in single channel 3 way mode, with corresponding Outputs on the rear panel.

Balanced Inputs and Outputs
EC-2 has Balanced Inputs and Outputs, on XLR connectors.
The EC-2 also has an additional summed Mono Low output, for applications that need a Mono Low
feed (e.g. Left and Right full-range plus a single Sub Bass speaker).
High Pass Filter
There is also a preset 30 Hz HighPass filter to remove unwanted subsonics which can damage speakers
and waste amplifier power.
In addition, each output has up to +6 dB of gain available, to compensate for amplifiers and speakers of
differing sensitivities.
Universal AC Power
AC power range is a universal 100 to 120V or 220 to 240VAC, and is connected to the unit via a standard
IEC connector, with built-in fuse and voltage change switch.
Uncompromising Audio Quality
Innovative circuit design is pointless unless it delivers stunning sound quality, and here the EC-2 excels.
It has been designed for uncompromising audio quality, and to achieve this, Linkwitz Riley 24dB (Fourth
Order) state variable filters are used throughout, ensuring a smooth Phase Correct transition through the
crossover region.
From Stage Monitors to Studio Monitors, from Front of House to the Front room of your House, the ARX
EC-2 is a crossover that is suited to any application that requires flawless, transparent sound.
You'll never compromise on Quality when you choose ARX

T E C H N I C A L S P E C I F I C A T I O N S

Input Impedance Balanced 20 Kohms, Unbalanced 10 Kohms
Input Headroom + 21 dB
CMRR >45 dB, 20 Hz-20 KHz
Output Impedance Balanced 300 ohms, Unbalanced 150 ohms
Output Level (Max) + 21dB
Frequency Response 30Hz-20KHz +or- 0.5dB
Note: 30 Hz is a function of the High Pass filter
Signal to Noise ratio (Controls at Unity) -90 dB Unweighted, -93 dB 'A' weighted
Distortion 004% THD,0dB,1KHz
Dynamic Range 111 dB
Power Requirements 100/120 V AC, 220/240 V AC
Weight 5 lbs/2.2 Kg
Dimensions 19“W x 13/4“H x 6“D, 482 x 44 x 155mm
Input Connector type XLR
Output Connector type XLR
Crossover point frequencies are changed internally by varying the value of 4 resistors
per channel.

Front Panel Controls
Low and High Output controls for 2 way mode
Low, Mid and High Output controls for 3 way mode
Marker panels for labelling crossover assigns
2 way/ 3 way status LEDs
Rear Panel
Balanced XLR Inputs and Outputs
Additional summed mono Low output
2 way / 3 way mode switch

Providing 48-bit filter algorithms, 24-bit AD/DA conversion and a dynamic range of 115 dB, the DSP 244 sets new standards for digital loudspeaker controllers and processors. The DSP 244 is an universal Digital Sound System Processor that provides 2 inputs and 4 outputs; plus internal summing of the inputs 1 and 2. Via matrix it is possible to assign the outputs to any input or to the sum of the inputs. It is further possible to establish the following configurations: Stereo or Dual 2-Way systems, 3-Way + Direct and 4-Way systems, each with Mono Subchannel, but also full range systems. High and low-pass filters are provided for the frequency crossover functions in all operation modes. The selection includes Linkwitz-Riley, Butterworth and Bessel type filters with switchable slopes between 6, 12, 18 and 24 dB/oct. A huge number of additional filters offers extremely flexible correction of the frequency response. Each input incorporates a 5-band equalizer, allowing to assign high and low-pass, high and low-shelving or parametric peak-dip filters to its individual filter sections. Next to the frequency crossover filters, four additional filters are employed in each output channel, which also can be set to work as high or low-pass, high or low-shelving filters, parametric peak-dip filters, or all-pass filters. Additional filtering is provided through 2. order high-passes for the realization of B-6 alignment, or special LPN-filters (Low-Pass Notch filters) for correcting the frequency and phase responses of optimally vented woofer cabinets. Each channel additionally provides a delay, a polarity switch, a programmable level control and a digital compressor / limiter while the master delays are located in the input channels. Datasheets / ManualsBrochure (309KB)

Mains voltage 90 - 250 V AC / 50 - 60 Hz Power consumption 20 watts Safety class I Inputs 2 x XLR IN, electronically balanced, transformer optional available 2 x XLR OUT (Direct Out) Input voltage (nominal) 1.55 V / + 6 dBu Max. input voltage 24.5 V / + 30 dBu Input impedance 20 kohms Common mode rejection > 40 dB AD-conversion 24-bit, Sigma-Delta, 128 times oversampling, linear phase Outputs 4 x XLR OUT, electronically balanced Output voltage (nominal) 1.55 V / + 6 dBu Max. output voltage 8.7 V / + 21 dBu Output impedance

Behringer CX-3400 3-Way Stero/4-Way Mono Frequency Crossover with Limiters The CX3400 is an active frequency crossover enabling 2 or 3-way stereo or even 4-way mono operation. Each band features two 24-dB Linkwitz-Riley filters, as well as individual IGC limiters, while the integrated delay enables flexible time alignment. Polarity switches for each output allow quick and easy runtime compensation for various driver and horn types.2 Respectively: 3-Way stereo or 4-way mono 24 dB / octave Linkwitz-Riley filter Mono-Sub switchable LF / HF gain regular / mutable CD horn EQ switchable Vertex frequency tunable Factor switching (10x) Multi-band limiter switch / variable (threshold) Limit display each way LF Delay (max 2ms / 60cm) Phase reverse 25 Hz subsonic filter, sym XLR in / out with multiband limiters Dimensions: 19", 1U, 147 mm case depth Weight: 1.7 kgThe DriveRack® PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx's proprietary AutoEQTM and AFSTM algorithms, a new input delay module for delaying the FOH system to the backline, Ethernet control via an Android®, iOS®, Mac®, or Windows® device, and updated Wizards, the DriveRack PA2 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation. Available Input Processing
  • dbx Compression
  • AFSTM (Advanced Feedback Suppression)
  • Graphic EQ
  • 8-Band Parametric EQ (adjusted when using the AutoEQ)
  • Subharmonic Synthesis
Available Output Processing
  • Crossover (supports full range, 2-way, and 3-way systems)
  • 8-Band Parametric EQs (used for speaker tunings)
  • dbx Limiting
  • Driver Alignment Delays
Input (2) line inputs. (1) RTA Mic input
Input Connectors (2) Female XLR line inputs. (1) Female XLR RTA Mic input
Input Type Electronically balanced/RF filtered
Input Impedance >50 kohm
A/D Converter dbx Type IVTM Conversion System
CMRR > 45dB
Mic Preamp Phantom Power +15VDC (RTA)
Mic Preamp Equivalent Input Noise (EIN)
Output (6) Line Outputs
Output Connectors Male XLR
Output Type Electronically balanced, RF filtered
Output Impedance 120 Ω
Max Output +20dBu
A/D Dynamic Range 112 dB A-weighted, 110 dB unweighted
Type IV Dynamic Range 123 dB with transient material, A-weighted, 22kHz BW; 121 dB with transient material, unweighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW
Input Delay Length 100ms
Alignment Delay 10ms per channel (60ms total)
Sample Rate 48kHz
Dynamic Range >110 dB A-weighted, >107dB unweighted
THD+Noise 0.003% typical at +4dBu, 1kHz, 0dB input gain
Frequency Response 20Hz - 20kHz, +/- 0.5dB
Interchannel Crosstalk
Operating Voltage 100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz
Power Consumption 22 W
Unit Weight 5.25 lbs. (2.4 kg)
Shipping Weight 6.75 lbs. (3.1 kg)
Dimensions 1.75" (H) x 5.75" (D) x 19" (W), 4.4cm (H) x 14.6cm (D) x 48.26cm (W)
D/A Dynamic Range 112 dB A-weighted, 110dB unweighted

Based on a two-in, six-out topology, the DC-One is designed primarily for users of small-to-medium sized sound systems in both mobile and installed applications. While the unit is an all-new development based on a powerful SHARC processor, it is 100 percent compatible with all settings from other Electro-Voice signal processors. A large part of DC-Oneʼs development was aimed at ensuring that users can easily handle its serious digital horsepower and high-end audio performance. Free. PC-Editor software is available, or the DC-One can be operated via the front panel.   A/D Conversion    24-Bit Delta-Sigma
A/D Conversion    24-bit/sigma-delta (linear phase) 128 times oversampling
Analog Inputs    2 XLR (Electronically Balanced), 2 XLR THRU OUT (Electronically Balanced)
Analog Outputs    6 XLR (Electronically Balanced)
Control Protocol    Front Panel USB Connector
D/A Conversion    24-bit/sigma-delta 128 times oversampling
D/A Conversion    24-Bit Delta-Sigma
Data Format    24-Bit
Digital Inputs    1 XLR AES/EBU (2 Ch)
Dynamic Range    111 dB (unweighted, band limited 22 Hz - 22 kHz)
Electronics Type    Processor
FIR-Drive    No
Frequency Response    10 Hz - 22 kHz (±0.5 dB)
Input Impedance (Balanced)    10 kΩ
Internal Processing    32-Bit Floating Point
Mains Voltage    100-240 VAC
Maximum Input Voltage    8.7 V / +21 dBu (Without -6 dB Analog Pad Engaged)
Maximum Output Voltage    8.7 V / +21 dBu
Nominal Input Voltage    1.23 V / +4 dBu
Nominal Output Voltage    1.23 V / +4 dBu
Output Impedance (Balanced)    50 Ω
Power Consumption    25 W
Sample Rate    48 kHz
THD+N    < 0.01% (band limited 22 Hz - 22 kHz)
Height    1RU 44.45 mm (1.75“)
Width    482.6 mm (19“)
Depth    355.6 mm (14“)
Weight Net    4.6 kg (10.14 lbs) 

Weight2.60 kg5.00 kg5.00 kg4.30 kg2.00 kg4.60 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.60 kg
Weight 5.00 kg
Weight 5.00 kg
Weight 4.30 kg
Weight 2.00 kg
Weight 4.60 kg