LD SYSTEMS D1001-PROFESSIONAL DYNAMIC VOCAL-FULLRANGE MIC.

69.17 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Data sheet [697,2 KB] Battery disposal information [77,1 KB] Our top vocal microphones. These low-feedback dynamic supercardioid and condenser vocal microphones feature a broad frequency spectrum, low distortion at high sound pressure levels, and “shockproof” capsule mounting for minimalhandling noise. Suitable for all demanding stage applications. Also available with ON/OFF switch . Capsule type: Dynamic […]

 

Read more

bestsellers_logo_1

D1001 Data sheet Data sheet [697,2 KB]
D1001 Battery disposal information Battery disposal information [77,1 KB]

Our top vocal microphones. These low-feedback dynamic supercardioid and condenser vocal microphones feature a broad frequency spectrum, low distortion at high sound pressure levels, and “shockproof” capsule mounting for minimalhandling noise. Suitable for all demanding stage applications. Also available with ON/OFF switch .

  • Capsule type: Dynamic
  • Polar pattern: Supercardioid
  • Frequency response: (Hz) 50 – 16000
  • Sensitvity (dBV/pa): -54 (2.0 mv/pa)
  • Rated Impedance (ohm): 300
  • Dimensions (mm) 52 x 165
  • Max.SPL (dB) 134 dB (THD
  • Connector: 3Pin, XLR-type gold plated pins
Weight 0.30 kg

Reviews

There are no reviews yet.

Be the first to review “LD SYSTEMS D1001-PROFESSIONAL DYNAMIC VOCAL-FULLRANGE MIC.”

Your email address will not be published. Required fields are marked *

You may also like…

Quick Comparison

LD SYSTEMS D1001-PROFESSIONAL DYNAMIC VOCAL-FULLRANGE MIC. removeAKG P 3S Microphone, Dynamic Cardioid, w/on-off switch removeSENNHEISER E-935 CARDIOID DYNAMIC VOCAL MICROPHONE removeSENNHEISER E-845S Dynamic Microphone with ON/OFF Switch removeSENNHEISER MD-441U Dynamic Microphone for Tabura and Cymbals removeNEUMANN BCM-705 SIDE-ADRESS CARDIOID DYNAMIC MICROPHONE remove
NameLD SYSTEMS D1001-PROFESSIONAL DYNAMIC VOCAL-FULLRANGE MIC. removeAKG P 3S Microphone, Dynamic Cardioid, w/on-off switch removeSENNHEISER E-935 CARDIOID DYNAMIC VOCAL MICROPHONE removeSENNHEISER E-845S Dynamic Microphone with ON/OFF Switch removeSENNHEISER MD-441U Dynamic Microphone for Tabura and Cymbals removeNEUMANN BCM-705 SIDE-ADRESS CARDIOID DYNAMIC MICROPHONE remove
Image
SKUD1001P 3SH10SE00088H10SE00054H10SE00040H11NE00030
Rating
Price 69.17 incl. GR VAT 43.21 incl. GR VAT 179.00 incl. GR VAT 99.00 incl. GR VAT 959.00 incl. GR VAT 680.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

In stock

In stock

In stock

AvailabilityAvailable on backorderAvailable on backorderIn stockIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Contentbestsellers_logo_1 D1001 Data sheet Data sheet [697,2 KB] D1001 Battery disposal information Battery disposal information [77,1 KB] Our top vocal microphones. These low-feedback dynamic supercardioid and condenser vocal microphones feature a broad frequency spectrum, low distortion at high sound pressure levels, and "shockproof” capsule mounting for minimalhandling noise. Suitable for all demanding stage applications. Also available with ON/OFF switch .
  • Capsule type: Dynamic
  • Polar pattern: Supercardioid
  • Frequency response: (Hz) 50 - 16000
  • Sensitvity (dBV/pa): -54 (2.0 mv/pa)
  • Rated Impedance (ohm): 300
  • Dimensions (mm) 52 x 165
  • Max.SPL (dB) 134 dB (THD
  • Connector: 3Pin, XLR-type gold plated pins
The P 3 S microphone is ideal for backing vocals, guitar, wind instruments and many other applications.  It has a metal case and wire mesh grill to ensure exceptional ruggedness. Key Features:
  • Rugged performance microphone designed for backing vocals and instruments
  • Rugged wire mesh cap with internal windscreen
  • Die-cast metal body
  • Complete with stand adapter and zip bag
  • On/Off switch
Specifications:
  • Polar pattern Cardioid
  • Frequency range 40 to 18,000 Hz
  • Sensitivity 2.5mV/Pa
  • Max. SPL 144 dB SPL
  • Recommended load impedance >=2,000 ohms

The cardioid e 935 is a fully professional vocal microphone,
developed to cut through high on-stage levels. 

Features
Rugged metal body
Advanced shock-mount design
Consistent on-/off-axis response
Hum compensating coil
Made in Germany
Delivery includes a pouch and a microphone clamp
Delivery Includes
1 e 935
MZQ 800 microphone clamp
Pouch

Technical Data
Pick-up pattern  Cardioid 
Frequency response (microphone)  40.....18000 Hz 
Sensitivity in free field, no load (1kHz) 
2,8mV/Pa bei 1 kHz = -51dB (0 dB = 1V/Pa) = -71 dB (0 dB = 1V/ubar) 
Nominal impedance  350 Ohm 
Min. terminating impedance  1000 Ohm 
Dimensions  47 x 181 mm 
Weight  330 g 

The E-845S is a high-performance super-cardioid lead vocal microphone with an extended high-frequency response, specially designed for stage use.

Frequency Response : 40.....16000 Hz
Sensitivity in free field, no load : (1kHz) 1,8 mV/Pa
Min. terminating impedance : 1000 Ohm
Dimensions : d 46 x 185 mm
Weight : w/o cable 330 g

The MD 441 U is a microphone of exceptional quality: its acoustic properties come as close as possible to those of a condenser microphone. Accurate signal response and low distortion are ensured, even with the highest sound pressure levels. Surface:
all metal body with black leatherette finish, sound inlet basket: nickel plated.

Pick-up pattern : super-cardioid
Sensitivity in free field, no load : (1kHz) 1,8 mV/Pa +- 2 dB
Nominal impedance : 200 Ohm
Min. terminating impedance : 1000 Ohm
Dimensions : 270 x 33 x 36 mm
Weight : 450 g

The first Neumann microphone with a dynamic capsule. Functionally optimized design
specifically for the broadcast field, featuring integrated pop protection, suppression of
structure-borne noise and a hypercardioid directional characteristic. 
Emotion conveyed with technical perfection. This is the ideal which the Neumann
microphones in the Broadcast Line have been designed to fulfill. The fine-tuning to the
requirements of professional broadcast studios and the individual, functionally optimized
design* ensure that these are microphones of character.
The BCM 705 is Neumann?s first dynamic microphone. The housing and headgrille are
identical to those of the BCM 104; only the green logo indicates that this is something new
from Neumann. The principle of reduction to the essentials can be seen in the dynamic
capsule with a hypercardioid directional characteristic, specifically designed for speech
reproduction at close range. Multi-level isolation from structure-borne noise ensures operation
free of interference, even in a lively studio environment.
Mechanical Features
The microphone headgrille twists off easily for quick cleaning. Neumann offers optional,
color-coded headgrilles so that, for reasons of hygiene, each announcer can use his or her
individual headgrille. Iin front of the capsule, mounted on a frame holder, a fine gauze serves
as a built-in popscreen.
The microphones of the Broadcast Line have an elastic mount against structure-borne noise,
that is compatible with standard broadcast-segment microphone arms.
Acoustic features
The frequency response has a light treble boost, in the region from 2 kHz to 9 kHz, aiding the
speech intelligibility. The bass frequency response is designed to compensate for the overemphasis
of the bass caused by the proximity effect.
The integrated Pop Screen
A pop screen not only prevents the occurrence of plosive pop noises in vocal recordings, but also
efficiently prevents unwanted particles, from respiratory moisture, nicotine, to food remnants, from
settling on the diaphragm. The pop screen can be removed for cleaning without the use of tools.
Mounting
The preferred mode of operation is to suspend the BCM 104 or BCM 705 from a standard studio
boom arm.
A thread adapter to fit different connector threads is included. In order to provide protection from
structure-borne noise, both the capsule and the microphone in its mount are elastically suspended.

The optional SG 5 swivel mount allows additional angling of the microphone by +/-90 degrees.
 
FEATURES:
Dynamic capsule
Hypercardioid directional characteristic
Characteristic, functionally optimized design*
Integrated, neutral pop protection
Integrated elastic suspension
Individual headgrilles for different users
Colored rings to identify the replacement headgrilles
Easy removal and cleaning of microphone headgrille (with bayonet mount)
Mechanical compatibility with standard studio boom arms
Multi-level isolation from structure-borne noise
No power supply required

APPLICATION HINTS:
Announcer's mic for broadcasting and studio

This is just one of the most common applications. We recommend
additional experimentation to gain maximum use from this microphone.

TECHNICAL DATA:
Acoustical operating principle Pressure gradient transducer
Directional pattern Hypercardioid
Frequency range 20 Hz ... 20 kHz
Sensitivity at 1 kHz into 10 kohm 1,7 mV/Pa = ?55,4 dB ± 1 dB
Rated impedance 200 ohms
Rated load impedance >= 10,000 ohms
Equivalent SPL CCIR 468-3 32 dB
Equivalent SPL DIN/IEC 651 18 dB-A
S/N ratio CCIR 468-3 62 dB
S/N ratio DIN/IEC 651 76 dB
Weight 500 g
Diameter 64 mm
Length 85 mm
Height (without suspension) 110 mm

Weight0.30 kg1.00 kg0.33 kg0.33 kg0.45 kg2.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.30 kg
Weight 1.00 kg
Weight 0.33 kg
Weight 0.33 kg
Weight 0.45 kg
Weight 2.00 kg