| Content | LD Systems D 1015 CM
Condenser Conference Microphone without base
Data Sheet
The slim and flexible design of the D1015CM gooseneck microphone with its professional, highly sensitive and uni-directional condenser element makes it perfect for all situations in which the spoken word must be understood clearly. Its low self noise also makes this microphone ideal for professional sound reinforcement and recording in meeting and seminar rooms, schools and churches. Equipped with a 3-pole XLR connector, it operates on phantom power (9 - 52 V).
Specifications
Product type
Microphones
Type
Installations
Frequency response
50 - 20000 Hz
Directivity
cardioid
Nominal impedance
250 Ohm(s)
Phantom power requierements
9 - 52 V
Microphone input
XLR (3-pin)
Length
330 mm
Weight
0,18 kg |
- Digital controller for any size systems
- Ease of use
- Complete with all inputs and outputs needed for complex systems
- Integrated infrared signal output
- Free basic control software included
The CS 5 BU ensures easy, user-friendly control of everything from a small discussion setup to a large conference system. The Base Unit provides all the inputs and outputs needed to manage a complex audio system. It controls 64 audio channels that can be individually programmed and assigned to interpretation channels or NOM limitation.
To ensure maximum reliability, all microphone stations and interpreter stations are „daisy-chained" together and connected back to the Base Unit, forming a closedcircuit digital audio bus. Thus, the entire system will continue operating perfectly, with no interruption, even if one of the bus cables breaks.
To power the system, a CS 5 PS 12 power supply is connected to every twelfth microphone station, ensuring consistent signal levels. Unlike competitive techniques, AKGʼs approach to keeping consistent signal levels throughout the system is uncommonly cost efficient. Every CS 5 Conference System comes complete with a FREE basic control software package so the entire system can be controlled from a computer from day one.
The Base unit shall operate up to 5000 units. As analogue inputs the base unit shall handle an external microphone for easy translating to be routed to channel 1, an ordinary external microphone, telephone in and out with mix minus sum, tape in and out and Line in and out. The infrared modulation shall be included in the base unit, providing the relevant infrared signal on two BNC connectors. Also included in the base unit shall be a USB connector to connect to a PC. A basic software package for participants database, voting and other basic functions shall be included. The unit shall be 1 HU 19” wide in a rack mount housing. A serial port shall be available to enable AMX control.
|
|
|
| - DOT MATRIX DESIGNED VFD DISPLAY
- USB RECORDING(USING USB MEMORY STICK MP3 FILE)
- HIGH FIDELITY 60W MONO CHANNEL AMPLIFIER
- BUILT-IN MONITOR SPREAKER WITH CONTROL VOLUME
- 3 BAND EQUALIZER
- EXTRA MICROPHONE JACK WITH VOLUME
- AUX INPUT AUX OUT LINE INPUT LINE OUT
- CONNECTING: 30 MIC UNIT
- EXPANSION CAPABILITY |
|
|
|
|
|
| Dot MATRIX designed VFD Display |
| USB Recording (Using USB Memory stick, MP3 file) |
| High fidelity 60W mono channel amplifier |
| Built-in monitor speaker with control volume |
| 3 Band equalizer |
| Extra Microphone Jack with Volume |
| AUX input, AUX out, LINE input, LINE out |
| Connecting : 30 MIC unit |
| Expansion capability with IMS-300 (Sub amplifier) |
| Power Source : 100~120VAC or 220~240VAC ; 50/60Hz
(supplied AC mains transformer depends on country requirements) |
| Weight : 5.8kg / 12.78lb |
| Dimensions (W x H x D) : 482 x 44 x 380 mm / 19 x 1.75 x 15in |
| ※ Specifications and design subject to change without notice. |
|
|
|
|
- Base Station for up to 200 Microphone Stations
- Intuitive controls
- Superior audio quality
- Voice activation and NOM limitation
- Standard ins and outs for external equipment
The CS 2 Base Station controls up to 200 Microphone Stations and provides automatic NOM (Number of Open Microphones) attenuation. System gain will decrease by approx. 3 dB every time the number of open microphone doubles. The result is a substantially lower risk of feedback even if the number of open microphones varies constantly.
A selectable Voice Activation function turns the microphones on automatically as soon as they are talked into.
The NOM Limitation function allows the number of simultaneously open microphones to be limited to one, two, three, four, or five. This function can be locally disabled on each Microphone Station so a specific microphone, e.g., one mounted on a lectern, will come on every time, no matter how many mics may be open already. |
Flush mounting frame for permanent installation of the AKG conference microphone units |
Rugged infrared receiver for up to seven selectable channels, for use with headphones, e.g., AKG K 77. Operates for more than 12 hours per battery charge.
The CS 5 IRR7 shall reproduce the floor channel and 6 translated languages. It shall have a 3,5mm stereo jack to connect any stereo headphone, a volume potentiometer and an easy selector switch. It shall have a built in NiMh rechargeable battery to supply the unit for up to 13 hours operation time. The unit shall switch off automatically when loosing the signal to save power. It shall be rechargeable with charging contacts on the housing.
|
Reviews
There are no reviews yet.