| Content | LD Systems D 1015 CM
Condenser Conference Microphone without base
Data Sheet
The slim and flexible design of the D1015CM gooseneck microphone with its professional, highly sensitive and uni-directional condenser element makes it perfect for all situations in which the spoken word must be understood clearly. Its low self noise also makes this microphone ideal for professional sound reinforcement and recording in meeting and seminar rooms, schools and churches. Equipped with a 3-pole XLR connector, it operates on phantom power (9 - 52 V).
Specifications
Product type
Microphones
Type
Installations
Frequency response
50 - 20000 Hz
Directivity
cardioid
Nominal impedance
250 Ohm(s)
Phantom power requierements
9 - 52 V
Microphone input
XLR (3-pin)
Length
330 mm
Weight
0,18 kg |
- System Features and Outline
- Bilingual conference system. Either English interpretation (main audio) or Japanese interpretation (sub audio) is selectable for monitoring.
- Operations such as giving speech permission can be done from the operation PC. *Custom design.
- The number of conference units can be set for any of one, two or four persons allowed to talk at a time.
- All speeches during the conference can be recorded clearly.
- Sub audio(Japanese interpretation) is not recorded.
- Threefold choice vote function enables the voting just at the press of a Vote key on each unit. The result can be instantly totalized on the Central unit.
- Speeches can be addressed to audience via sound amplification. * The sub audio output is not amplified
SPECIFICATIONS:
| Power Source | 100-240 V AC, 50/60Hz (supplied from AC adapter (accessory)) | | Power Consumption | 72W | | Input | MIC: -60 dB*, 600O,unbalanced, phone jackAUX: -20 dB*, 10 kO,unbalanced, phone jack | | Output | REC: -20 dB＊, 10 kΩ, unbalanced, phone jack, RCA pin jack HEADPHONE: Mini jack | | Number of Connectable Chairman/Delegate Units | 64 units | | Number of Connectable Infrared Transmitter/Receiver Units | 4 units (up to 16 units by using four Distributors) | | Infrared Transmitter/Receiver I/O Terminal | 4 BNC jacks | | External Control Terminal | D-sub connector (9 P, male) | | LED Indicator | Voting result indicators 1-3 (7-segment LED, double-digit number), Audio signal receiving indicators 1-4 CH, Data signal receiving indicator, External control priority indicator, External control communication indicator, Power indicator, Battery indicator (flashes when a Chairman/Delegate unit's battery nears complete discharge) | | Function Switch | Simultaneous speaker No. setting switch: 1/2/4 Mic-off setting switch: TIME OUT ON/OFF
Speech priority selector switch: A/B/C (A: First-in-first-out priority, B: Last-in-first-out priority, C: Fixed for the first unit, and last-in-first-out for the subsequent units) | | Microphone Mix/Cut Switch (for the Base Language) | MIC/CUT (Mix): Chairman/Delegate units ＋ MIC 1＋ AUX 1 ＋AUX 3 → Base Language (Cut): MIC 1 ＋ AUX 1 ＋ AUX 3→ Base Language | | Microphone Mix/Cut Switch (for the Translation Language) | MIC/CUT (Mix): Chairman/Delegate units ＋ MIC 2 ＋ AUX 2 ＋ AUX 3 → Translation Language (Cut): MIC 2 ＋ AUX 2 ＋ AUX 3→Translation Language | | AUX 3 Mixing Select Switch | MIC/CUT (Mix): AUX 3 input is relayed to the line output. (Cut): AUX 3 input is not relayed to the line output. | | Operating Temperature | 0º to＋40º | | Finish | Panel: Surface-treated steel plate, gray metallic, paint, semi-gloss | | Weight | 2.7kg | | Accessory | AC adapter (Cord length: 1.8 m DC cord, and 2 m detachable AC cord)…1 | | Option | Rack mounting bracket: MB-TS900 | | | ＊0dB=1V |
| Infrared radiator for use with TS-800. It comes with wall mount and stand in microphone crane. Coverage area within 7 meters in sight. Power supply via the central unit. Maximum number in each system 16 pcs. |
Infrared radiators providing wireless transmission of up to seven language channels for persons (e.g., observers) listing to a conference without asking for the floor.
The infrared radiators shall connected to the CS 5 BU through 2 BNC connectors and 50 Ohm coaxial cabling and serial concatenation. It shall transmit a PPM system modulated time-multiplex outputs of the central unit shall drive an arbitrary number of radiators. The CS 5 IRT1 shall have a radiation angle of +/- 22° and a working distance of 300 meters (with 50% down). The CS 5 IRT2 shall have a radiation angle of +/- 22° and a working distance of 500 meters (with 50% down).
As accessories of the infrared radiators the holding frame needed for mounting it to the side wall or the ceiling shall be included. The transmitter shall have a built in switchable power supply with IEC connector.
|
The new TS-770 Series Conference System is ideal for conferences and meetings in government, corporate, educational and hotel applications. The new system provides communications for conferences and boardrooms. The easy to use TS-770 Series is comprised of the TS-770 Central Unit supporting up to 70 chairperson / delegate stations. The new TS-770 Series conference system is backed with a five year product warranty.
Features
- Easy to set up and operate
- Up to 70 Chairperson/Delegate stations per TS-770 Central Unit
- Supports system expansion up to (3) TS-770 Central Units for a total of 210 Chairperson/Delegate stations in one system
- Telephone or PC Remote Delegate station operation using the TS-775
- All Microphones ON Record function
- External source inputs and PA/record outputs
- System Test function
- Five year warranty
|
Interpreter station for use with selectable microphones. Four input channels selectable: floor, two pre-selected languages, relay. An external microphone input allows the station to be used either with a gooseneck microphone and separate headphones or a headset.
Gooseneck, capsule and connecting cable are not included.
The Interpreter unit CS 5 IU has to ensure the technical conditions that are needed for interpreters working in the interpreter booth. Its task is on one side to forward the floor voice or the voice of an other interpreter to the headphone of all the interpreters or to the loudspeakers that are incorporated into the interpreter unit, and on the other side to transmit the text translated by the interpreters to the relevant system channel with the aid of the incorporated microphone.
According to the international prescriptions two interpreter units have to be installed into an interpreter booth in order to allow the continuous working of two interpreters. The following functions must be enabled: listening to 2 preselected channels with the push of one button. Choosing any other channel using "up” and "down” buttons. Output to 2 preselected channels by the push of one button. Possibility to give a sign to the speech holder to slow down as well as to the technician to call for assistance. Input/Output shall be possible via gooseneck microphone and headphone or a suitable headset. The unit shall be connected in the data ring at any point.
|
Reviews
There are no reviews yet.