| Content | LD Systems D 1015 CM
Condenser Conference Microphone without base
Data Sheet
The slim and flexible design of the D1015CM gooseneck microphone with its professional, highly sensitive and uni-directional condenser element makes it perfect for all situations in which the spoken word must be understood clearly. Its low self noise also makes this microphone ideal for professional sound reinforcement and recording in meeting and seminar rooms, schools and churches. Equipped with a 3-pole XLR connector, it operates on phantom power (9 - 52 V).
Specifications
Product type
Microphones
Type
Installations
Frequency response
50 - 20000 Hz
Directivity
cardioid
Nominal impedance
250 Ohm(s)
Phantom power requierements
9 - 52 V
Microphone input
XLR (3-pin)
Length
330 mm
Weight
0,18 kg |
- System Features and Outline
- Bilingual conference system. Either English interpretation (main audio) or Japanese interpretation (sub audio) is selectable for monitoring.
- Operations such as giving speech permission can be done from the operation PC. *Custom design.
- The number of conference units can be set for any of one, two or four persons allowed to talk at a time.
- All speeches during the conference can be recorded clearly.
- Sub audio(Japanese interpretation) is not recorded.
- Threefold choice vote function enables the voting just at the press of a Vote key on each unit. The result can be instantly totalized on the Central unit.
- Speeches can be addressed to audience via sound amplification. * The sub audio output is not amplified
SPECIFICATIONS:
| Power Source | 100-240 V AC, 50/60Hz (supplied from AC adapter (accessory)) | | Power Consumption | 72W | | Input | MIC: -60 dB*, 600O,unbalanced, phone jackAUX: -20 dB*, 10 kO,unbalanced, phone jack | | Output | REC: -20 dB＊, 10 kΩ, unbalanced, phone jack, RCA pin jack HEADPHONE: Mini jack | | Number of Connectable Chairman/Delegate Units | 64 units | | Number of Connectable Infrared Transmitter/Receiver Units | 4 units (up to 16 units by using four Distributors) | | Infrared Transmitter/Receiver I/O Terminal | 4 BNC jacks | | External Control Terminal | D-sub connector (9 P, male) | | LED Indicator | Voting result indicators 1-3 (7-segment LED, double-digit number), Audio signal receiving indicators 1-4 CH, Data signal receiving indicator, External control priority indicator, External control communication indicator, Power indicator, Battery indicator (flashes when a Chairman/Delegate unit's battery nears complete discharge) | | Function Switch | Simultaneous speaker No. setting switch: 1/2/4 Mic-off setting switch: TIME OUT ON/OFF
Speech priority selector switch: A/B/C (A: First-in-first-out priority, B: Last-in-first-out priority, C: Fixed for the first unit, and last-in-first-out for the subsequent units) | | Microphone Mix/Cut Switch (for the Base Language) | MIC/CUT (Mix): Chairman/Delegate units ＋ MIC 1＋ AUX 1 ＋AUX 3 → Base Language (Cut): MIC 1 ＋ AUX 1 ＋ AUX 3→ Base Language | | Microphone Mix/Cut Switch (for the Translation Language) | MIC/CUT (Mix): Chairman/Delegate units ＋ MIC 2 ＋ AUX 2 ＋ AUX 3 → Translation Language (Cut): MIC 2 ＋ AUX 2 ＋ AUX 3→Translation Language | | AUX 3 Mixing Select Switch | MIC/CUT (Mix): AUX 3 input is relayed to the line output. (Cut): AUX 3 input is not relayed to the line output. | | Operating Temperature | 0º to＋40º | | Finish | Panel: Surface-treated steel plate, gray metallic, paint, semi-gloss | | Weight | 2.7kg | | Accessory | AC adapter (Cord length: 1.8 m DC cord, and 2 m detachable AC cord)…1 | | Option | Rack mounting bracket: MB-TS900 | | | ＊0dB=1V |
|
Flush mounting frame for permanent installation of the AKG conference microphone units |
- Digital controller for any size systems
- Ease of use
- Complete with all inputs and outputs needed for complex systems
- Integrated infrared signal output
- Free basic control software included
The CS 5 BU ensures easy, user-friendly control of everything from a small discussion setup to a large conference system. The Base Unit provides all the inputs and outputs needed to manage a complex audio system. It controls 64 audio channels that can be individually programmed and assigned to interpretation channels or NOM limitation.
To ensure maximum reliability, all microphone stations and interpreter stations are „daisy-chained" together and connected back to the Base Unit, forming a closedcircuit digital audio bus. Thus, the entire system will continue operating perfectly, with no interruption, even if one of the bus cables breaks.
To power the system, a CS 5 PS 12 power supply is connected to every twelfth microphone station, ensuring consistent signal levels. Unlike competitive techniques, AKGʼs approach to keeping consistent signal levels throughout the system is uncommonly cost efficient. Every CS 5 Conference System comes complete with a FREE basic control software package so the entire system can be controlled from a computer from day one.
The Base unit shall operate up to 5000 units. As analogue inputs the base unit shall handle an external microphone for easy translating to be routed to channel 1, an ordinary external microphone, telephone in and out with mix minus sum, tape in and out and Line in and out. The infrared modulation shall be included in the base unit, providing the relevant infrared signal on two BNC connectors. Also included in the base unit shall be a USB connector to connect to a PC. A basic software package for participants database, voting and other basic functions shall be included. The unit shall be 1 HU 19” wide in a rack mount housing. A serial port shall be available to enable AMX control.
|
- System Features and Outline
- Bilingual conference system. Either English interpretation (main audio) or Japanese interpretation (sub audio) is selectable for monitoring.
- Operations such as giving speech permission can be done from the operation PC. *Custom design.
- The number of conference units can be set for any of one, two or four persons allowed to talk at a time.
- All speeches during the conference can be recorded clearly.
- Sub audio(Japanese interpretation) is not recorded.
- Threefold choice vote function enables the voting just at the press of a Vote key on each unit. The result can be instantly totalized on the Central unit.
- Speeches can be addressed to audience via sound amplification. * The sub audio output is not amplified
SPECIFICATION:
| Power Source | 7.4 V DC (battery), 9 V DC (AC adapter) (supplied from BP-900 battery (option) or AD-0910 AC adapter (option)) | | Power Consumption | MAX. 270 mA | | Infrared Emitter/Detector Wavelength | 870 nm (AM: Brightness modulation) | | Infrared Emitter/Detector Modulation Method | Frequency modulation | | Infrared Emitter/Detector Carrier Frequency | Transmission: Audio channel 1: 7.35 MHzAudio channel 2: 8.10 MHzAudio channel 3: 8.55 MHzAudio channel 4: 9.15 MHzControl channel: 6.45 MHz | | | Reception: Audio channel: 1.95 MHz | | Infrared Emitter/Detector Acceptance Angle | Vertical: 90°, Horizontal: 120° | | Infrared Emitter/Detector Emission Angle | Vertical: 90°, Horizontal: 120° | | Infrared Emitter/Detector Covering Range | 7 m (radius) | | Input | Microphone terminal: Combined type of XLR-4-31 (dedicated for connecting the optional TS-903 or TS-904) | | LED Indicator(TS-801·802) | Speech indicator (flashes when the unit is out of communications range), Power indicator (flashes when the unit is out of communications range or when the battery level is low) | | Battery Life | Approx. 10 hours (when the fully-charged BP-900 battery is used with "During Speech" to "Standby" ratio of 1:2) | | Operating Temperature | 0.to+40. | | Dimensions | 210(W )×65.9(H )×152(D )mm | | Weight | 630g | | Option | Microphone: TS-903, TS-904 (Select either one.)Lithium-ion battery: BP-900 AC adapter: AD-0910 |
|
Rugged infrared receiver for up to seven selectable channels, for use with headphones, e.g., AKG K 77. Operates for more than 12 hours per battery charge.
The CS 5 IRR7 shall reproduce the floor channel and 6 translated languages. It shall have a 3,5mm stereo jack to connect any stereo headphone, a volume potentiometer and an easy selector switch. It shall have a built in NiMh rechargeable battery to supply the unit for up to 13 hours operation time. The unit shall switch off automatically when loosing the signal to save power. It shall be rechargeable with charging contacts on the housing.
|
Reviews
There are no reviews yet.