| Content | LD Systems D 1015 CM
Condenser Conference Microphone without base
Data Sheet
The slim and flexible design of the D1015CM gooseneck microphone with its professional, highly sensitive and uni-directional condenser element makes it perfect for all situations in which the spoken word must be understood clearly. Its low self noise also makes this microphone ideal for professional sound reinforcement and recording in meeting and seminar rooms, schools and churches. Equipped with a 3-pole XLR connector, it operates on phantom power (9 - 52 V).
Specifications
Product type
Microphones
Type
Installations
Frequency response
50 - 20000 Hz
Directivity
cardioid
Nominal impedance
250 Ohm(s)
Phantom power requierements
9 - 52 V
Microphone input
XLR (3-pin)
Length
330 mm
Weight
0,18 kg |
- Quick setup and takedown even of large systems
- No operator training required
- Superior audio quality
- Voice activation or manual PTT control
- Ease of use, high reliability
The CS 2 is the ideal solution for venues where no sound engineer is available permanently such as meeting rooms, town halls, etc. The central Base Unit controls microphone channels and a priority button allows one or more chairpersons to call the meeting to order. Two types of Microphone Units are available, the Chair Unit with a priority button (any number of Chair Units can be used in a system) and the Delegate Unit. Providing two loudspeakers, two headphone outputs, and a "Voice Zoom” function, each version can be used by two persons.
For permanent flush mounting e.g. in a tabletop an optional mounting frame CS 5 MF is available.
The CS 2 uses AKG's famous Modular Series capsules that connect to the Microphone Units via a GN 30 CS (approx. 12 in./30 cm) or GN 50 CS (approx. 20 in./50 cm) gooseneck. A rugged, threaded TRS mini jack with gold plated contacts ensures a firm, wobble-free mechanical joint and excellent electrical contact. Five different ready-to-use cables in standard lengths between 4 ft. (1.25 m) and 66 ft. (20 m) are available for connecting the individual Microphone Units together. This does not only save time but increases the reliability of the system. A range of optional accessories will solve any installation problem. With its wide variety of options, the CS 2 is more flexible than many "fully digital” systems. Plus, the AKG brand name stands for excellent sound and high reliability.
Bottom panel dip switches and pots on each Microphone Unit allow many functions to be adjusted individually.
- Voice Activation threshold
- Voice Activation hold time
- Microphone automute after user stops talking
- Enable/disable NOM limitation
- Voice Activation ON/OFF
- Priority level
- “Voice Zoom” ON/OFF
- Loudspeaker/headphones level reset or last setting
- Adjustable compression
|
AKG Conference System CS 2 is fully modular and therefore highly flexible, allowing users to create a custom system for any conference application. From microphone capsules to power supplies, designers will find exactly the right components for every type of conference system. Analog control is provided by the Base Station. |
Supplied ceiling-mounting brackets facilitate installation.
Equipped with power indicator LED.
The IR-510R covers a practical radius of approx. 8 m.
| Specification |
|
|---|
| Power Source | 24V DC (Supplied from the optional IR-702T) | | Current Consumption | Max.60mA | | Infrared Detector | | | Wavelength | 870nm | | Carrier Frequency | Channel A:3.100MHz/Channel B:3.350MHz | | Reception Area | Practical radius of approx. 8 m in a space without any obstacle | | Connection Terminal | 75 Ω, BNC jack | | Operating Temperature | 0ºC to +40ºC | | Operating Humidity | 30% to 85% RH | | Finish | Case: Polycarbonate resin, visible light cut filter Base: ABS resin, black | | Dimensions | 120 x 71.3 (H) mm | | Weight | 205g (unit only) |
|
- System Features and Outline
- Bilingual conference system. Either English interpretation (main audio) or Japanese interpretation (sub audio) is selectable for monitoring.
- Operations such as giving speech permission can be done from the operation PC. *Custom design.
- The number of conference units can be set for any of one, two or four persons allowed to talk at a time.
- All speeches during the conference can be recorded clearly.
- Sub audio(Japanese interpretation) is not recorded.
- Threefold choice vote function enables the voting just at the press of a Vote key on each unit. The result can be instantly totalized on the Central unit.
- Speeches can be addressed to audience via sound amplification. * The sub audio output is not amplified
SPECIFICATIONS:
| Power Source | 100-240 V AC, 50/60Hz (supplied from AC adapter (accessory)) | | Power Consumption | 72W | | Input | MIC: -60 dB*, 600O,unbalanced, phone jackAUX: -20 dB*, 10 kO,unbalanced, phone jack | | Output | REC: -20 dB＊, 10 kΩ, unbalanced, phone jack, RCA pin jack HEADPHONE: Mini jack | | Number of Connectable Chairman/Delegate Units | 64 units | | Number of Connectable Infrared Transmitter/Receiver Units | 4 units (up to 16 units by using four Distributors) | | Infrared Transmitter/Receiver I/O Terminal | 4 BNC jacks | | External Control Terminal | D-sub connector (9 P, male) | | LED Indicator | Voting result indicators 1-3 (7-segment LED, double-digit number), Audio signal receiving indicators 1-4 CH, Data signal receiving indicator, External control priority indicator, External control communication indicator, Power indicator, Battery indicator (flashes when a Chairman/Delegate unit's battery nears complete discharge) | | Function Switch | Simultaneous speaker No. setting switch: 1/2/4 Mic-off setting switch: TIME OUT ON/OFF
Speech priority selector switch: A/B/C (A: First-in-first-out priority, B: Last-in-first-out priority, C: Fixed for the first unit, and last-in-first-out for the subsequent units) | | Microphone Mix/Cut Switch (for the Base Language) | MIC/CUT (Mix): Chairman/Delegate units ＋ MIC 1＋ AUX 1 ＋AUX 3 → Base Language (Cut): MIC 1 ＋ AUX 1 ＋ AUX 3→ Base Language | | Microphone Mix/Cut Switch (for the Translation Language) | MIC/CUT (Mix): Chairman/Delegate units ＋ MIC 2 ＋ AUX 2 ＋ AUX 3 → Translation Language (Cut): MIC 2 ＋ AUX 2 ＋ AUX 3→Translation Language | | AUX 3 Mixing Select Switch | MIC/CUT (Mix): AUX 3 input is relayed to the line output. (Cut): AUX 3 input is not relayed to the line output. | | Operating Temperature | 0º to＋40º | | Finish | Panel: Surface-treated steel plate, gray metallic, paint, semi-gloss | | Weight | 2.7kg | | Accessory | AC adapter (Cord length: 1.8 m DC cord, and 2 m detachable AC cord)…1 | | Option | Rack mounting bracket: MB-TS900 | | | ＊0dB=1V |
|
- System Features and Outline
- Bilingual conference system. Either English interpretation (main audio) or Japanese interpretation (sub audio) is selectable for monitoring.
- Operations such as giving speech permission can be done from the operation PC. *Custom design.
- The number of conference units can be set for any of one, two or four persons allowed to talk at a time.
- All speeches during the conference can be recorded clearly.
- Sub audio(Japanese interpretation) is not recorded.
- Threefold choice vote function enables the voting just at the press of a Vote key on each unit. The result can be instantly totalized on the Central unit.
- Speeches can be addressed to audience via sound amplification. * The sub audio output is not amplified
SPECIFICATION:
| Power Source | 7.4 V DC (battery), 9 V DC (AC adapter)
(supplied from BP-900 battery (option) or AD-0910 AC adapter (option)) | | Current Consumption | MAX. 270 mA | | Wavelength | 870 nm (AM: Brightness modulation) | | Modulation Method | Frequency modulation | | Carrier Frequency | Transmission: Audio channel 1: 7.35 MHz
Audio channel 2: 8.10 MHz
Audio channel 3: 8.55 MHz
Audio channel 4: 9.15 MHz
Control channel: 6.45 MHz
Reception: Base language channel: 1.95 MHz
Translation language channel: 2.25 MHz | | Acceptance Angle | Vertical: 90°, Horizontal: 120° | | Emission Angle | Vertical: 90°, Horizontal: 120° | | Covering Range | 7 m (radius) | | Input | Microphone terminal: Combined type of XLR-4-31 (dedicated for connecting the optional TS-903 or TS-904) | | Output | Monitor speaker: 8Ω, 0.2 W
Headphone: Mini jack × 2 | | LED Indicator | Speech indicator (flashes when the unit is out of communications range),Voting status indicators 1 -3 (flashes when the unit is out of communication range or when the battery level is low), Power indicator (flashes when the unit is out of communications range or when the battery level is low) | | Battery Life | Approx. 10 hours (when the fully-charged BP-900 battery is used with "During Speech" to "Standby" ratio of 1:2) | | Operating Temperature | 0º to＋40º | | Finish | Top panel: ABS resin, gray metallic, paint, semi-gloss | | Dimensions | 210（W ）×65.9（H ）×152（D ）mm | | Weight | 640g | | Option | Lithium-ion battery: BP-900 AC adapter: AD-0910 |
|
Reviews
There are no reviews yet.