LD SYSTEMS D1017SET 7 Piece Drum-Mic-Set

Discontinued

139.99 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
LD SYSTEMS 7 Piece Drum-Mic-Set     Set consisting of: 1 x bass drum dynamic microphone 4 x tom/snare drum dynamic microphones 2 x overhead condenser microphones All microphones will be supplied with microphone clips in a hard case. Top cost/performance ratio! Product: Bass-Drum (1x) Overhead (2x) Tom Tom/Snare (4x) Type: Dynamic Back Electret Cond. […]

 

Read more

LD SYSTEMS 7 Piece Drum-Mic-Set

 

 

Set consisting of:
  • 1 x bass drum dynamic microphone
  • 4 x tom/snare drum dynamic microphones
  • 2 x overhead condenser microphones

All microphones will be supplied with microphone clips in a hard case. Top cost/performance ratio!

Product: Bass-Drum (1x) Overhead (2x) Tom Tom/Snare (4x)
Type: Dynamic Back Electret Cond. Dynamic
Polar Pattern: Supercardioid Supercardioid Supercardioid
Frequency response: 50 – 16000 Hz 40 – 18000 Hz 80 – 12000 Hz
Sensitivity: -55 dbV/Pa (1.78mV/Pa) -41 dBV/Pa (8.91 mV/Pa) -51 dbV/Pa (2.82mV/Pa)
Rated impedance: 200 Ω 200 Ω 200 Ω
Min. Load impedance: / 1000 Ω /
Max. SPL: 147 dB 137 dB (THD ≤ 1% 1000 Hz) 150 dB
Signal to Noise Ratio: / 74 dB /
Dynamic Range: / 112 dB /
Power Supply: / 9-48 V Phantom /
Current consumption: / 2 mA /
Connector: 3 pin XLR gold-plated 3 pin XLR gold-plated 3 pin XLR gold-plated
Dimension: ø 46 x 100 mm ø 21 x 200 mm ø 46 x 100 mm
Weight: 260 g 150 g 240 g
Weight 2.40 kg

Reviews

There are no reviews yet.

Be the first to review “LD SYSTEMS D1017SET 7 Piece Drum-Mic-Set”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD SYSTEMS D1017SET 7 Piece Drum-Mic-Set removeLD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone removeSHURE KSM-137SL - Cardioid Instrument Microphone 20Hz to 20kHz removeSHURE SM-57LCE - Dynamic Instrument Microphone removeBEYERDYNAMIC M 88 TG Dynamic Microphone (Hypercardioid) removeSHURE BETA-57A - Instrument Microphone 50Hz to 16kHz remove
NameLD SYSTEMS D1017SET 7 Piece Drum-Mic-Set removeLD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone removeSHURE KSM-137SL - Cardioid Instrument Microphone 20Hz to 20kHz removeSHURE SM-57LCE - Dynamic Instrument Microphone removeBEYERDYNAMIC M 88 TG Dynamic Microphone (Hypercardioid) removeSHURE BETA-57A - Instrument Microphone 50Hz to 16kHz remove
Imagebeyerdynamaic m 88 tg dynamic hyperdioid microphoneSHURE BETA-57A - Instrument Microphone 50Hz to 16kHz
SKUD1017SETLDWS1000MWKSM137/SLSM-57LCEM-88 TGBETA57A
Rating
Price 139.99 incl. GR VAT 108.04 incl. GR VAT 396.80 incl. GR VAT 119.95 incl. GR VAT 419.99 incl. GR VAT 175.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Only 5 left in stock

In stock (can be backordered)

Only 1 left in stock (can be backordered)

AvailabilityOut of stockAvailable on backorderAvailable on backorderOnly 5 left in stockIn stock (can be backordered)Only 1 left in stock (can be backordered)
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Legendary, universal all purpose microphone classic
  • Perfectly suitable for stage and studio
  • Unbelievably rich sound
  • Made in germany
Content

LD SYSTEMS 7 Piece Drum-Mic-Set

 

 

Set consisting of:
  • 1 x bass drum dynamic microphone
  • 4 x tom/snare drum dynamic microphones
  • 2 x overhead condenser microphones

All microphones will be supplied with microphone clips in a hard case. Top cost/performance ratio!

Product:Bass-Drum (1x)Overhead (2x)Tom Tom/Snare (4x)
Type:DynamicBack Electret Cond.Dynamic
Polar Pattern:SupercardioidSupercardioidSupercardioid
Frequency response:50 - 16000 Hz40 - 18000 Hz80 - 12000 Hz
Sensitivity:-55 dbV/Pa (1.78mV/Pa)-41 dBV/Pa (8.91 mV/Pa)-51 dbV/Pa (2.82mV/Pa)
Rated impedance:200 Ω200 Ω200 Ω
Min. Load impedance:/1000 Ω/
Max. SPL:147 dB137 dB (THD ≤ 1% 1000 Hz)150 dB
Signal to Noise Ratio:/74 dB/
Dynamic Range:/112 dB/
Power Supply:/9-48 V Phantom/
Current consumption:/2 mA/
Connector:3 pin XLR gold-plated3 pin XLR gold-plated3 pin XLR gold-plated
Dimension:ø 46 x 100 mmø 21 x 200 mmø 46 x 100 mm
Weight:260 g150 g240 g
LDWS1000MW User User's manual [7,20 MB]
LDWS1000MW Battery disposal informationLDWS1000MW Frequency listLDWS1000MW Frequency lists / Pin assignment Wireless SystemsLDWS1000MW Data sheet - Microphone for Brass/Wind/Percussioninstruments Wind / percussion instrument clip microphone

Linear frequency response, natural sound reproduction, lightweight, easy and stable positioning thanks to the gooseneck, very good impact sound isolation thanks to elastic capsule fastening, strong clamp providing good fastening without causing any damage to the instrument thanks to the soft rubber inner surface of the clips. Phantom Power Adapter LDPHA also available separately.

Specifications:
  • Converter Principle: Electret Condenser Microphone
  • Pick-up Pattern: Cardioid pattern
  • Frequency Response: 50 Hz – 18 kHz
  • SPL: 133 dB
  • Sensitivty: -45 dB +/- 3dB
  • Impedance: 250 Ohms +/- 30% @1kHz
  • Connections: Mini XLR – 3 pins
  • Gooseneck: 70 mm
  • Cable length: 1,5 m
  • Surface: Black matt
  • Weight: 56 g
  • Accessories: Wind protection, Phantom power adapter

The Shure KSM137 is an end-address condenser microphone with a cardioid polar pattern. Designed for studio use, yet rugged enough for live applications, the KSM137 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.

Features

  • A highly consistent cardioid polar pattern
  • Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar? diaphragm for superior transient response
  • Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
  • Premium electronic components, including gold-plated internal and external connectors
  • Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
  • Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
  • Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
  • Three-position switchable low-frequency filter reduces background noise and counteracts proximity effect

Performance Characteristics

  • Extended frequency response
  • Low self noise
  • Exceptional reproduction of low-frequency sounds
  • Can withstand high sound pressure levels (SPL)
  • High output level
  • No crossover distortion
  • Uniform polar response
  • Superior common mode rejection and suppression of radio frequency interference

APPLICATIONS

Some typical applications for the KSM137 are listed below. Microphone use, however, is a matter of personal taste. The KSM137 may be used for a variety of applications other than those listed.

  • Acoustic instruments -- such as piano, guitar, drums, percussion, strings
  • Wind instruments -- brass and woodwind
  • Low frequency instruments -- such as double bass, electric bass, kick drum
  • Overhead miking -- drums or percussion
  • Ensembles -- choral or orchestral
  • Room ambiance pick-up -- guitar amplifier or drums

Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application.

Suggested Applications

Acoustic Guitar
Acoustic Bass
Cymbals
Brass/Woodwinds
Orchestra
Ensemble Vocals
Piano
Strings
Room Ambience
Live Recording

The Shure SM57 unidirectional dynamic microphone is exceptional for musical instrument pickup or for vocals. With its bright, clean sound and carefully contoured presence rise, the SM57 is ideal for live sound reinforcement and recording. It has an extremely effective cardioid pickup pattern which isolates the main sound source while minimizing background noise. In the studio, it is excellent for recording drums, guitar, and woodwinds. For musical instruments or vocals, the SM57 is a consistent choice of professional performers. It is also the standard microphone used on the podium of the U.S. President for over 30 years. Its outstanding performance, legendary reliability, and diversity of application make this "workhorse" the choice of performers, producers, and sound engineers the world over.
  • Contoured frequency response for clean, instrumental reproduction and rich vocal pickup
  • Professional-quality reproduction for drum, percussion, and instrument amplifier miking
  • Uniform cardioid pickup pattern isolates the main sound source while reducing background noise
  • Pneumatic shock-mount system cuts down handling noise
  • Extremely durable under the heaviest use
  • Frequency response: 40 to 15,000 Hz
Frequency Range 40 Hz to 15 kHz
Impedance 150 Ohms
Load Impedance 310 Ohms
Sensitivity 56 dBV/Pa (Open Circuit Voltage, 1 kHz)
Color Gray
Mounting 5/8"-27 Female, Mic Clip (Included)
Construction Material Steel, Steel Wire Grille
Dimensions ø: 1.26 x L: 6.18" / ø: 32 x L: 157 mm
Weight 10.02 oz / 284 g
 

Technical Data

Transducer Type: Dynamic
Polar Pattern: Hypercardioid
Microphone Frequency Response: 30 - 20.000 Hz
Connection Type: XLR 3-pin

Made in Germany

Like all members of the M series, the M 88 TG is handcrafted in Germany. The materials and the precise craftsmanship that go into the microphone ultimately create a world-class product, a level of quality that turns an ordinary microphone purchase into a long-term investment.

 
Perfect for heavy bass Sources
The M 88 TG excels on the kick drum, saxophone and percussions, the result of a balanced sound profile and deep bass tones. It is a must-have for every microphone collection. And why shouldn’t it be when you consider its features? It is both insensitive to high sound pressure levels and feedback resistant thanks to its nearly perfect hypercardioid!  
Flexible tool iN The studio

The M 88 TG excels in the studio with the help of its multifaceted flexibility. No matter whether the job involves vocals, horns, guitar amplifiers or drums – the microphone is the perfect choice for the widest range of sources. It is all the result of its exceptionally broad frequency response and rich sound.

Excellent for acoustic and electric instruments as well as for vocals, the extremely versatile Beta 57A dynamic microphone provides optimal warmth and presence. The Beta 57A maintains a true supercardioid pattern throughout its frequency range. This insures high gain before feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. A completely new grille design lets you take better advantage of proximity effect. The Beta 57A is an exceptionally versatile microphone. Typical applications include drums, guitar amplifiers, brass, woodwinds and vocals.
  • Tailored frequency response provides drums, guitars, vocals, and horns with studio quality sound
  • Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
  • Hardened steel mesh grille that facilitates use of proximity effect and resists wear and abuse
  • Neodymium magnet for high signal-to-noise ratio output
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Frequency response: 50 to 16,000 Hz
Suggested Applications Guitar Amp Bass Amp Acoustic Guitar Brass/Saxophone Snare Drums Rack/Floor Toms Congas Woodwinds Lead Vocals
Weight2.40 kg0.35 kg0.50 kg1.00 kg0.600 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.40 kg
Weight 0.35 kg
Weight 0.50 kg
Weight 1.00 kg
Weight 0.600 kg
Weight 0.50 kg