| Content |
LD SYSTEMS 7 Piece Drum-Mic-Set
Set consisting of:- 1 x bass drum dynamic microphone
- 4 x tom/snare drum dynamic microphones
- 2 x overhead condenser microphones
All microphones will be supplied with microphone clips in a hard case. Top cost/performance ratio!
| Product: | Bass-Drum (1x) | Overhead (2x) | Tom Tom/Snare (4x) | | Type: | Dynamic | Back Electret Cond. | Dynamic | | Polar Pattern: | Supercardioid | Supercardioid | Supercardioid | | Frequency response: | 50 - 16000 Hz | 40 - 18000 Hz | 80 - 12000 Hz | | Sensitivity: | -55 dbV/Pa (1.78mV/Pa) | -41 dBV/Pa (8.91 mV/Pa) | -51 dbV/Pa (2.82mV/Pa) | | Rated impedance: | 200 Ω | 200 Ω | 200 Ω | | Min. Load impedance: | / | 1000 Ω | / | | Max. SPL: | 147 dB | 137 dB (THD ≤ 1% 1000 Hz) | 150 dB | | Signal to Noise Ratio: | / | 74 dB | / | | Dynamic Range: | / | 112 dB | / | | Power Supply: | / | 9-48 V Phantom | / | | Current consumption: | / | 2 mA | / | | Connector: | 3 pin XLR gold-plated | 3 pin XLR gold-plated | 3 pin XLR gold-plated | | Dimension: | ø 46 x 100 mm | ø 21 x 200 mm | ø 46 x 100 mm | | Weight: | 260 g | 150 g | 240 g |
|
|
NEW Wider mounting base capable of accommodating a larger range of microphone stands. Even works with the LP Claw.
Specifically engineered for drum and instrument applications, the Beta 56A's compact, pivoting design makes it the ideal choice for these applications.
Its extremely uniform supercardioid pickup pattern provides high gain before feedback and excellent rejection of unwanted noise. A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation. The stand adapter keeps the microphone securely in place, even if it is struck by a drumstick. Typical Beta 56A applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds.
- Built-in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility
- Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
- Compact design reduces stage clutters
- Hardened steel mesh grille resists wear and abuse
- Neodymium magnet for high signal-to-noise ratio output
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
- Frequency response: 50 to 16,000 Hz
| The e 604 is a cardioid microphone especially suitable for use with drums and brass instruments.
Features
Rugged reinforced glass-fibre body
Low sensitivity to impact and handling noise
Very high sound pressure handling capability
Low distortion microphone
Hum compensating coil
Easy to position due to compact design
Integral stand mount
Delivery Includes
1 e 604
1 drum clip
1 pouch
Technical Data
Frequency Response 40.....18000 Hz
Sensitivity in free field, no load (1kHz) 1,8 mV/Pa
Min. terminating impedance 1000 Ohm
Dimensions d 33 x 59 mm
Weight w/o cable 60 g |
The e 902 is a dynamic cardioid instrument microphone, which was designed
for lowest bass signals with very high sound pressure levels.It is suitable for
kick drums, bass guitar-amps, tuba, and other bass instruments.
Features
Frequency response optimized for kick drum
Very fast attack
Exceptionally clean and clear pick-up of the deepest bass signals
Integral stand mount
Hum compensating coil
Shock mounted capsule
Robust metal body
Delivery Includes
e 902 microphone
Pouch
User Manual
Technical Data
Pick-up pattern cardioid
Frequency response 20...18000 Hz
Sensitivity in free field, no load (1kHz) 0,2 mV/Pa; (@ 60 Hz): 0,6 mV/Pa
Nominal impedance 350 Ohm
Min. terminating impedance 1000 Ohm
Dimensions 128,5 x 60 mm
Weight 440 g
|
Audio Frequency Response 20 Hz - 10,000 Hz
Case Material Die cast zinc
Connector Type 3-pin XLR
Element Dynamic
Finish Textured Satin Black
Impedance, Low-Z balanced 150 Ω
Mic Type Instrumental
Open Circuit Voltage 0.63 mV/Pascal
Polar Pattern Supercardioid
Power Requirement Passive
Shipping Weight 23.7 oz (672 g)
Wired/Wireless Wired
Weight Net 12.84 oz (364 g)
|
The E-602 is a cardioid microphone especially suitable for use with bass drums, bass guitar cabs, tubas and other low frequency instruments.
Frequency Response : 20.....16000 Hz
Sensitivity in free field, no load (1kHz) : 1,0 mV/Pa
Min. terminating impedance : 1000 Ohm
Dimensions : d 60 x 153 mm
Weight : w/o cable 550 g
|
Reviews
There are no reviews yet.