Content | LD Systems D 1 USB
USB / XLR Dynamic Vocal Microphone with Headphone Output
User's Manual
Data Sheet
The D1USB is an all-purpose dynamic microphone with USB connection, which requires no additional drivers. It has a perfect cardioid pickup pattern and a wide frequency range (50 Hz - 16,000 Hz). Therefore, it is usable for almost any sound source.
The clear and natural sound of the D1USB makes it the ideal microphone for use in podcast productions, multimedia presentations and other applications, for example, rehearsal recordings.
- USB connector for direct connection to computers
- No additional drivers required
- Compatible with Vista, XP, WIN7, WIN8 and Mac OSX
- Equipped with a high-quality analog/digital converter
- Built-in audio interface with headphone output
Frequency response
50 - 16000lx @ 1m Hz
Nominal impedance
600 Ohm(s)
Microphone input
USB , XLR
Accessories (included)
microphone clip , Table Stand , USB cable
| STUDIO CONDENSER MICROPHONE C-1U
Studio Condenser Microphone with USB Audio Interface and software suite
Professional, large-diaphragm condenser microphone with built-in USB interface, ideal for podcasters and musicians
Plug this amazing USB-mic straight into your computer and turn your PC or Mac computer into a recording system without the need for any other hardware
Directly works with your PC or Mac computer—ultra-low latency ASIO and WDM drivers for PC audio optimization included
Exceptionally flat frequency response and ultra-high sound resolution perfect for voice, acoustic instruments, etc.
Cardioid pickup pattern for outstanding sound source separation and feedback rejection
Pressure-gradient transducer with shock-mounted capsule
- Professional large-diaphragm condenser microphone with built-in 48 kHz USB interface for unsurpassed audio quality
- Gets phantom power directly from PC USB output
- Comes with Audacity audio editor, Kristal audio engine, Podifier uploading software, and Juice and Podnova downloading software
- Maximum SPL (sound pressure level) of 136 dB
- Ideal as main and support microphone for studio and live applications
- Exceptionally flat frequency response and ultra-high sound resolution
- Cardioid pickup pattern for outstanding sound source separation and feedback rejection
- Ultra low-noise transformerless FET input circuitry
- LED indicates phantom power operation
- Ultra-rugged construction with die-cast body
- USB connector and swivel stand mount included
| The Pod Pack 1 is a professional upgrade to any announce studio. The kit consists of a high-quality USB condenser microphone paired with a fully-adjustable suspension boom arm, keeping the desk clear and the microphone always in position for podcasting, on-air or voice-over applications. Assembly is a snap and the articulating boom clamps securely to nearly any desk or table surface.
- Included USB cardioid condenser microphone
- All-steel construction
- Dual suspension springs for stable angle
- Fully adjustable - microphone can even be suspended upside-down
- Clamps to nearly any desk or table
- USB cable included
- Microphone
- Element: Back electret condenser
- Element Diameter: 13mm
- Polar pattern: Cardioid
- Frequency response: 20 - 17,000 Hz
- Sensitivity: -34dB +/-2dB (0dB = 1V/Pa @ 1kHz)
- Output impedance: 100Ω +/-30% (at 1kHz)
- Load impedance: >1kΩ
- Self noise: 16dBA
- Max SPL: 132dB (@ 1kHz
- Signal to Noise ratio: 78dB
Broadcast Boom Arm
- Adjustable height and angle
- Telescoping range: 15.75" - 27.5" (40cm - 70cm)
- Weight: 13.5oz (382g)
|
Reloop SPodcaster Condenser Microphone USB. Suitable for any type of broadcasting via computer, as connected directly to your PC or Mac without requiring a sound card with high-speed USB 2.0, all connections are as easy as ever. It features a condenser capsule offers us high quality recording.
Sensitivity: -65 ± 5 dB @ 1 kHz
S / N ratio: -59 dB
Frequency range: 50 Hz - 18 kHz
Connection: USB
Dimensions: 148 x 65 x 56 mm
Weight: 0.35 kg
Includes USB cable, table stand and software |
- Element: Back electret condenser
- Element diameter: 14mm
- Frequency response: 20–17,000Hz
- Sensitivity: -34dB ± 2dB (0dB = 1V/Pa @ 1kHz)
- Output: USB
- A-D converter: 48kHz / 16-bit sampling rate
- Output impedance: 100Ω ± 30% (at 1kHz)
- Load impedance: >1kΩ
- Self noise: 16dBA
- Max. SPL: 132dB (at 1kHz <1% THD)
- Signal to Noise ratio: 78dB
Microphone, USB Cable, Mic Clip
|
Combining high-resolution audio with increased connectivity options, the AT2020USBi cardioid condenser microphone adds a new level of sound-quality and convenience to the expanding lineup of Audio-Technica USB microphones. Modeled after the critically acclaimed AT2020, this digital output mic features an A/D converter with a 24-bit/96 kHz sampling rate to deliver high-resolution articulation and intelligibility thatʼs perfect for home studio recording, field recording, podcasting and voiceover use.
The AT2020USBi works with both USB and Lightning cables (included), so you can use it straight from the box to digitally capture audio on the device of your choice: PC, Mac or lightning equipped iOS device. The integrated gain control adds to the convenience, allowing you to adjust the input level directly on the microphone.
The AT2020USBi cardioid condenser microphone brings state-of-the-art sound for the on-the-go lifestyle to the family of Audio-Technica USB mics.
- Condenser microphone with digital output for convenient, high-resolution recording
- High-quality A/D converter with 24-bit/96 kHz sampling rate for superb, high-resolution audio
- Mic gain control allows you to adjust input level on the mic itself
- Smooth, extended frequency response ideally suited for podcasting, home studio recording, field recording and voiceover use
- Compatible with Windows 7 and above, Mac OS 10.6 and above, and iOS 7.02 and above (requires Lightning connector).
- Tripod desk stand with folding legs for secure and easily portable tabletop use
- Included USB and Lightning cables provide ready connectivity to computers and iOS devices
ELEMENT | Fixed-charge back plate, permanently polarized condenser | POLAR PATTERN | Cardioid | FREQUENCY RESPONSE | 20 – 20,000 Hz | POWER REQUIREMENTS | USB (5V DC); Lightning (3.3V DC) | BIT DEPTH | 24 bit | SAMPLE RATE | Up to 96 kHz | VOLUME CONTROL | Mic gain control | WEIGHT | 350 g (12.3 oz) | DIMENSIONS | 162.0 mm (6.38“) long, 52.0 mm (2.05“) maximum body diameter | OUTPUT CONNECTOR | Micro-HDMI | ACCESSORIES FURNISHED | Pivoting stand mount for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch; tripod desk stand; 4.9' (1.5 m) USB cable; 4.9' (1.5 m) Lightning cable |
|
Reviews
There are no reviews yet.