| Content | LD Systems DAVE 10 G3 - Active PA-System with DSP
The LD Systems DAVE 10 G3 is the latest generation of an extremely compact active PA system. The bass reflex subwoofer provides a solid bass foundation; the satellites ensure clearly defined mids and clear treble. The 2.1 power amp module built into the subwoofer delivers 1400W Peak power, and the intelligent LD LECC DSP guarantees perfect interaction and controlled functioning. The digital signal processor includes specially optimised crossovers, separate equalisers and limiters for the bass, mid, and treble frequency ranges, and a dynamic compressor that controls the subwoofer according to volume and provides for increased punch at low volumes.
The DAVE 10 G3 system's professional features include sturdy MDF cabinets, the necessary protection circuits, RCA, XLR/jack combo and Speakon-compatible connectors, and ergonomic handles. The LD "Evolutive" handles of the subwoofer are a genuine innovation - they permit a trouble-free, secure grip from all sides! The stand support of the satellites is tilted by five degrees for perfect orientation of the speaker cabinet.
Protection covers for the system components and a castor board with a lashing strap for convenient transport are available as accessories. Matching speaker stands, spacer tubes, and mounting forks are also available separately.
The DAVE 10 G3 is especially suitable for portable use and are very convenient to transport, making it just right for solo entertainers and duos. However, it also cuts a good figure in small permanent installations, e.g., in bars and restaurants.
- Type: active
- Max. SPL Continuous: 115 dB
- Max. SPL Peak: 126 dB
- Frequency range: 45 - 19,000 Hz
- Dispersion angle (H x V): 70 x 70°
Subwoofers
- Woofer size: 10“
- Woofer size: 254 mm
- Woofer magnet: ferrite
- Woofer brand: custom made
- Woofer voice coil: 2“
- Woofer voice coil: 50.8 mm
- Cabinet type: bass reflex
- Cabinet material: 15 mm MDF
- Cabinet surface: textured coating
- Subwoofer width: 345 mm
- Subwoofer height: 430 mm
- Subwoofer depth: 460 mm
- Subwoofer features: Threaded flange (M20), LD Systems Evolutive handles
Mid/Hi System
- Midrange size: 5,25“
- Midrange size: 133.4 mm
- Midrange magnet: ferrite
- Midrange brand: custom made
- Midrange voice coil: 1“
- Midrange voice coil: 25.4 mm
- Horn: radial
- Tweeter size: 1“
- Tweeter size: 25.4 mm
- Tweeter magnet: neodymium
- Tweeter brand: custom made
- Tweeter voice coil: 1“
- Tweeter voice coil: 25.4 mm
- Mid/Hi system impedance: 4 ohms
- Speaker inputs: 1
- Speaker input connections: Speakon compatible
- Mid/Hi system cabinet type: closed
- Mid/Hi system cabinet material: 12 mm MDF
- Mid/Hi system cabinet surface:: textured coating
- Mid/Hi system width: 200 mm
- Mid/Hi system height: 300 mm
- Mid/Hi system depth: 230 mm
- Mid/Hi system features: Ergonomic recessed handles, speaker stand support with 5° tilt
Amplifier module (integrated in subwoofer)
- Amplifier: Class A/B
- Amplifier power system (RMS) 350 W
- Amplifier power system (peak): 1400 W
- Protection: Short circuit, limiter, overload
- Cooling System: aluminium heat sink
- Controls: Power, Sub Level, Subwoofer Phase Reverse, Volume
- Indicators: On/Off, Limit, Signal
- Power supply: transformer
- Power consumption: 600 VA
- Line inputs: 2
- Line input connectors: RCA, XLR/ 6.3 mm jack (combo)
- Speaker outputs: 2
- Speaker output connections: Speakon compatible
| Delivering a massive low-end with punch and clarity, this set is ideal for outdoor sound reinforcement. With a quartet of subwoofers and two 15” tops, it easily covers medium-sized gigs at town fairs, street festivals and in marquees. We recommend this set for the following type of application: DJ, outdoor sound reinforcement for bands. The STINGER G3 IMPACT SET A is suitable for audiences of up to 400* pax. For optional stands and cables check out the "related products" section.
Set consisting of:
2 x STINGER 15 A G3 – 15” Powered loudspeaker
4 x STINGER SUB 18 A G3 – 18” Powered subwoofer
2 x STINGER 15 G3 PC – Padded protective cover for loudspeaker
4 x STINGER SUB 18 G3 PC – Padded protective cover for subwoofer
4 x STINGER SUB 18 G3 CB – Castor board for subwoofer
*NOTE: Audience size specifications are approximate only. The actual numbers may vary depending on room acoustics and environment.
Specifications
General
System output (RMS):
3,400 W
Frequency response
35 – 20,000 Hz
Dispersion (H x V)
90 x 50°
Items in this set
LD Systems STINGER SUB 18 G3 PC Padded protective Cover for Stinger® G3 Subwoofer 18"
Product type
PA Subwoofer Accessories
Thickness of the padding
8 mm
LD Systems STINGER SUB 18 G3 CB Dolly Board for Stinger G3 Subwoofer 18" Models
Product type
PA Complete Systems Accessories
Manufacturer of castors
Adam Hall
LD Systems STINGER 15 A G3 Active 15" 2-way bass-reflex PA Loudspeaker
Product type
PA loudspeaker
Low/mid driver dimensions
15 "
Woofer voice coil (mm)
76.2 mm
Horn
BEM optimized CD Horn
HF driver voice coil
25.4 mm
Dispersion (H x V)
90 x 50 °
Frequency response
50 - 20000 Hz
Protection circuits
Multiband limiter, over-current, thermal overload
Controls
2 x gain, 2 x Mic/Line
Line input connectors
6.3 mm jack, XLR
Operating voltage
Switching power supply
Cabinet material
15 mm Plywood
LD Systems STINGER 15 G3 PC Padded protective Cover for Stinger® G3 PA Loudspeaker 15"
Product type
PA Loudspeakers Accessories
LD Systems STINGER SUB 18 A G3 Active 18" bass-reflex PA subwoofer
Product type
PA subwoofer
Low/mid driver dimensions
18 "
Woofer voice coil (mm)
101.6 mm
Input impedance
30000 Ohm(s)
Frequency response
35 - Low-Pass Hz
Line input connectors
6.3 mm jack, XLR
Line output connectors
XLR
Protection circuits
DC, limiter, over voltage, short circuit
Power consumption (max.)
600 W
Operating Temperature
0 - 40 °C
Relative Humidity
< 80% (non-condensing)
Cabinet construction
Bass Reflex
Controls
Main level, Mode
Indicators
Limit, Mode, On, Protect (protection circuit engaged), Signal
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching), SMPS
Cabinet material
18 mm Plywood
| LD Systems STINGER G3 EVENT SET A 2 x 10" powered PA Speaker + 2 x 15" powered Subwoofer
This set is the perfect all-round package for small to medium-sized gigs and functions providing a tight and punchy low end from the two subwoofers. We recommend this set for the following type of application: DJ, small bands and more. The STINGER G3 EVENT SET A is suitable for audiences of up to 300* pax. For optional stands and cables check out the "related products" section.
Set consisting of:
2 x STINGER 10 A G3 – 10” Powered loudspeaker
2 x STINGER SUB 15 A G3 – 15” Powered subwoofer
2 x STINGER 10 G3 PC – Padded protective cover for loudspeaker
2 x STINGER SUB 15 G3 PC – Padded protective cover for subwoofer
2 x STINGER SUB 15 G3 CB – Castor board for subwoofer
*NOTE: Audience size specifications are approximate only. The actual numbers may vary depending on room acoustics and environment
General
| Product type |
PA system |
| Type |
Powered |
| System output (RMS): |
1.500 W |
| Frequency response |
40 - 20,000 Hz |
| Dispersion (H x V) |
90 x 50° |
| Weight |
91,782 kg |
LD Systems STINGER SUB 15 G3 PC Padded protective Cover for STINGER® G3 Subwoofer 15"
| Product type |
PA Complete Systems Accessories |
| Material |
birch multiplex |
| Type |
castor boards |
| Material thickness |
15 mm |
| Surface |
Polyurea |
| Color |
Black |
| Number of casters |
4 |
| Wheel diameter |
100 mm |
| Manufacturer of castors |
Adam Hall |
| number of drag castors |
2 |
| Length |
624 mm |
| Weight |
6 kg |
LD Systems STINGER SUB 15 G3 CB Dolly Board for Stinger G3 Subwoofer 15" Models
| Product type |
PA loudspeaker |
| Type |
active |
| Low/mid driver dimensions |
10 " |
| Woofer size |
254 mm |
| Woofer magnet |
Ferrite |
| Woofer brand |
Custom-made |
| Woofer voice coil |
2 " |
| Woofer voice coil (mm) |
50.8 mm |
| Horn |
BEM optimized CD Horn |
| HF driver dimensions |
1 " |
| HF driver size |
25.4 mm |
| HF driver magnet |
Ferrite |
| HF driver brand |
BMS |
| HF driver voice coil |
1 " |
| HF driver voice coil |
25.4 mm |
| Dispersion (H x V) |
90 x 50 ° |
| RMS |
300 W |
| Peak power |
600 W |
| Frequency response |
65 - 20000 Hz |
| Max. SPL (peak) |
127 dB |
| Protection circuits |
thermal overload |
| Input sensitivity |
-9 dBu |
| Controls |
2 x Mic/Line |
| Indicators |
Mic |
| Line input connectors |
XLR |
| Line outputs |
1 |
| Operating voltage |
Switching power supply |
| Cabinet material |
12 mm Plywood |
| Monitor angle |
54 ° |
| Width |
325 mm |
| Height |
527 mm |
| Depth |
318 mm |
| Weight |
12,7 kg |
LD Systems STINGER 10 A G3 Active 10" 2-way bass-reflex PA Loudspeaker
| Product type |
PA Loudspeakers Accessories |
| Material |
Nylon 1680D |
| Height |
530 mm |
| Width |
350 mm |
| Depth |
320 mm |
| Weight |
0,5 kg |
LD Systems STINGER 10 G3 PC Padded protective cover for Stinger® G3 PA Loudspeaker 10"
| Product type |
PA subwoofer |
| Type |
Powered |
| Low/mid driver dimensions |
15 " |
| Woofer size |
381 mm |
| Woofer magnet |
Ferrite |
| Woofer voice coil |
3 " |
| Woofer voice coil (mm) |
76.5 mm |
| Amplifier |
Class D |
| Input impedance |
30000 Ohm(s) |
| Input sensitivity |
0.3 V |
| RMS |
450 W |
| Peak power |
900 W |
| Frequency response |
40 - Low-Pass Hz |
| Line inputs |
2 |
| Line input connectors |
XLR |
| Line output connectors |
XLR |
| Max. SPL (peak) |
133 dB |
| Protection circuits |
short circuit |
| Power consumption (max.) |
600 W |
| Operating Temperature |
0 - 40 °C |
| Relative Humidity |
< 80% (non-condensing) |
| Cabinet surface |
Polyurea |
| Cabinet construction |
Bass Reflex |
| Controls |
Mode |
| Depth |
624 mm |
| Indicators |
Signal |
| Line outputs |
2 |
| Operating voltage |
SMPS |
| Cabinet material |
18 mm Plywood |
| Height |
477 mm |
| Weight |
31,9 kg |
LD Systems STINGER SUB 15 A G3 Active 15" bass-reflex PA subwoofer
| Product type |
PA Subwoofer Accessories |
| Color |
Black |
| Material |
Nylon 1680D |
| Type |
Covers |
| Thickness of the padding |
8 mm |
| Depth |
625 mm |
| Width |
567 mm |
| Height |
470 mm |
| Weight |
1,191 kg |
|
LD Systems MAUI 28 G2
Compact Column A System with Mixer and Bluetooth black
- All-in-one column speaker for PA and monitor applications
- 2,000 watts peak Class-D system power offer high performance with a low weight
- Powerful bass reproduction with 2 x 8" woofers
- Balanced mids thanks to the 16 x 3" full-range speakers
- Precise and silky highs with 2 x 1" high-frequency drivers
- Increased range and wider coverage through the array arrangement
- Homogeneous dispersion pattern through a BEM-optimised tweeter wave guide
- Distortion-free sound even at the highest volume thanks to LD Systems DynX® DSP technology
- Full control through a 4-channel mixer including Bluetooth® Stereo Audio Streaming
- Two-piece column for compact transport
- Secure plug-and-play connection thanks to the wireless multi-pin mechanism
- A wide range of application options through dismountable columns
- Easy operation with presets for mono or stereo configuration
- Extensive and smart accessories for installation and transport
A complete sound system that you can carry together with your instrument: introducing the MAUI 28 G2. The two column elements in the padded shoulder bag, the subwoofer in one hand and the guitar or keyboard in the other - and off you go! Setting up the complete system, which doubles as PA and monitor system is just as easy thanks to the special multi-pin cable plugs. The compact and elegant MAUI 28 G2 offers an unbeatable sound quality and wide-ranging sound distribution. It was developed with year-long experience in the design of the column systems as a user-friendly solution for medium sized gigs and fixed installations.
The MAUI 28 G2 is equipped with two 8" woofers, sixteen 3" full-range speakers and two 1" neodymium HF drivers. They are driven by a light Class-D power amplifier with an enormous 2,000 watts peak power and produce a grunty bass, balanced mids and precise and silky highs. The DynX® DSP technology from LD Systems provides a top-class performance every time and the highest level of freedom from distortion. It includes a multiband limiter which protects against overloading, an EQ, a compressor and a 3-way crossover with run time correction.
The design of the MAUI 28 G2 line array achieves a longer range, increased resistance to feedback and a wider space coverage, which makes separate monitor speakers superfluous. The wave guide of the tweeters has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves an homogeneous dispersion - Your audience hears you in the back row just as clearly as in the front.
With the integrated 4-channel mixer, system presets for mono or stereo configuration and Bluetooth® Audio Streaming, you have full control over the system. Whether you are a singer-songwriter, solo entertainer, DJ or musician in a small band, you will be thrilled with the extraordinary sound and portability of the MAUI 28 G2. The column and the subwoofer can be set up separately: thus, the system is extremely flexible and is also an excellent choice for fixed installations. With a selection of clever transport accessories and special mounting hardware, the MAUI 28 G2 is a well thought out overall solution, down to the last details.
Product type
PA Complete Systems
Frequency response
45 - 20000 Hz
Dispersion (H x V)
120° x 20 °
Low/mid driver dimensions
2 x 8 "
Woofer voice coil (mm)
50.8 mm
Cabinet construction
vented
Cabinet material
15 mm Plywood
Cabinet surface
texture paint
Midrange size
16 x 76.2 mm
Midrange brand
Custom-made
Midrange voice coil
25.4 mm
Tweeter dimensions
2 x 1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil (mm)
25.4 mm
Speaker input connections
Custom-made multipin
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
aluminium
Mid/Hi system cabinet surface
HD coating
Mid/Hi system width
96 mm
Mid/Hi system height
780 / 795 mm
Mid/Hi system depth
104 mm
Mid/Hi system weight
5.6 / 5.6 kg
Amplifier module (integrated in subwoofer)
Amplifier output system (RMS)
1000 W
Amplifier output system (peak)
2000 W
Protection circuits
DC protection , Multiband limiter , short circuit , thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
10% to 80%, (non-condensing)
Controls
Bluetooth switch , Hi-Z Level , Line level , Main level , Mono/stereo switch , MP3/Bluetooth Level , Power , Sub level
Indicators
Limit , mono , On , Protect (protection circuit engaged) , Setup , Signal , stereo
Power connector
IEC power cable (included)
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Power consumption Off / On / Max.
0/11/600 W
Line input connectors
RCA , XLR/6.3 mm jack
Line outputs
2 (1x System Out, 1x Sub Out)
Line output connectors
XLR
Mic inputs
XLR/6.3 mm jack
MP3 input connectors
3.5 mm jack
Hi-Z input connectors
6.3 mm jack
Speaker output connections
Custom-made multipin
Bit depth AD/DA converter
24 bit
Internal sampling frequency
48 kHz
Signal/noise ratio
100 dB
| 800Wrms AMPLIFIED PA SYSTEM WITH TWO SUBWOOFERS AND TWO COLUMN SPEAKERS
- Media player with SD / USB / Bluetooth inputs
- Graphic equalizer
- Two MIC / LINE inputs with tone control
- Digital ECHO
- Stereo LINE input
- Monitor output
- RMS power: 800W
- Frequency response: 47-20000Hz
- Max. SPL (continued): 128Db
N. 2 Subwoofer
- Transducer: 12 "(320mm)
- Dimensions (L * W * H): 355*550*440mm
N. 2 Satellites
- Transducers: 4 x 4 "mids, 4 x 1" Neodymium tweeters
- Dimensions (L * W * H): 125*120*480mm
- Stands and cables included
|
Although we refer to it as a "column” loudspeaker, the INSPIRE iP2000 delivers the powerful, high-quality sound and optimised dispersion inspired by our award-winning line array products – in a surprisingly lightweight and easy to use, allin-one form factor. Thanks to an on-board 3-channel digital mixer and multichannel 1,000-Watt Class-D amplifi er driving a customengineered 12" subwoofer, 16 x 2.75" neodymium drivers, and a horn loaded super tweeter, the iP2000 is ideally-suited for small to mediumsized performance venues, houses of worship, boardroom presentations, nightclubs, and much more. The iP2000 is lightweight: only 30.7 kg (67.7 lbs) and features industryleading KLARK TEKNIK Digital Sound Processing (DSP), Class-D amplifi er and Spatial Sound technologies – plus convenient Bluetooth stereo audio streaming and iPhone/iPad remote control.
| Manufacturer |
TURBOSOUND |
| Application |
Installation, Portable PA |
| Speaker Type |
Active |
| Speaker Category |
Satellite (full range) |
| Color |
Μαύρο |
| DSP |
Yes |
| Speaker Material |
Wooden Cabin |
| Speaker Power (Watt) |
1000 |
| Weight (kg) |
30,9 |
| Woofer (inches) |
12 |
| Tweeter / Driver (inches) |
16 x 2,75 - 1 |
| dB (max spl) |
123 |
| Frequency Response (Hz) |
38-20000 |
| Series |
iNSPIRE series |
| Model |
iNSPIRE iP2000 |
| Part Number |
000-BKX |
| Warranty |
3 Years Warranty |
|
User´s Manual
Reviews
There are no reviews yet.