Content | User's manual [3,30 MB]
Production Partner 04/2014
DDQ 15 2-Way Touring Class Powered Loudspeaker with DSP
The LD Systems DDQ 15 is an ultra high efficiency 2-way biamped loudspeaker for FOH and monitor applications, delay lines, portable PA systems and fixed installations delivering superior touring class performance.
A 24-bit/48 kHz custom Sharc DSP provides volume control, delay, EQ, crossover, phase alignment and comprehensive protection functions for precision adjustment and reliable operation while its 1ms look-ahead limiter ensures distortion-free audio at all levels. In addition, the DDQ features digital encoding, a high pass filter and ground lift switch.
The 15” FaitalPRO neodymium woofer and BMS compression driver complement is biamped by two Hypex UcD700 Class D modules with high efficiency SMPS and extremely low noise and THD. With 1.400 watts RMS output, 38 Hz - 20 kHz frequency response, 80° x 50° dispersion and a peak SPL of 136 dB the DDQ 15 provides superior high-power audio performance.
The 15 mm birch ply bass reflex enclosure incorporates a 50° angle and asymmetrical HF horn rotatable for floor monitor use. The hardware includes a steel grille, multiple flying points and the innovative Evolutive handles for easy portability.
- Touring class active PA speakers with Sharc DSP (24bit/48kHz)
- Distortion free thanks to 1 millisecond predictive peak limiter
- State of the art analog/digital converters (127dB/113dB dynamic range)
- Max SPL (peak): 136dB
- 80° x 50° rotatable asymmetrical horn flare
- 38 - 20,000 Hz frequency response
- 2 x Hypex 700 Watt Class D amplifier modules
- 15" Faital Pro neodymium woofer
- 1.4" BMS compression driver
- Switchable high-pass filter
- 50° monitor angle
- 13 x M10 flying points
- Lightweight
- Made in Germany
Technical specification:
- Type: active
- Version: DSP controlled
- Woofer Size: 15“
- Woofer Size: 381 mm
- Woofer/Midrange Magnet: neodymium
- Woofer/Midrange Brand: Faital Pro
- Woofer Voice Coil: 3“
- Woofer Voice Coil: 75 mm
- Tweeter Size: 1.4“
- Tweeter Size: 35.6 mm
- Tweeter Magnet: ceramic
- Tweeter Brand: BMS
- Tweeter Voice Coil: 1.75“
- Tweeter Voice Coil: 44.4
- Amplifier: 2 x Class D, Hypex Ucd700
- Dispersion Angle (H x V): 80 x 50°
- Power Output (RMS): 1400 (2 x 700 W)
- Frequency Response: 38 - 20,000 Hz
- Crossover Frequency: 1300 Hz
- Max. SPL (continuous): 124 100 - 10,000 Hz dB
- Max. SPL (peak): 136 dB
- Integral Media Player: no
- Protection: RMS power supply limiter, RMS speakers limiter , over current, over voltage, DSP-based "look ahead" limiter
- Controls: power switch (On / Off), X-Over Sub, Gain, Ground Lift
- Indicators: Operate, Peak Limit, X-Over Sub, Signal
- Line Inputs: 1
- Line Input Connectors: XLR
- Line Outputs: 2
- Line Output Connectors: XLR
- Power Supply: switching power supply
- Operating Voltage: 180 - 264 V AC, 47 - 63 Hz
- Housing Material: 15/18 mm birch plywood
- Housing Surface: polyurea
- Cabinet Type: bass reflex
- Monitor Angle: 50°
- Width: 420 mm
- Height: 736 mm
- Depth: 488 mm
- Features: LD Systems Evolutive handles, flange 36 mm, 13 x M10 flying points, switchable high-pass filter
| Features: EVS-18K 18-inch Woofer 123 dB max. SPL 400 W Class-D Amplifier Integrated DSP Cabinet Powered subwoofer 1 x 18“, vented design Maximum Amplifier Output Capability, IHF-A 400 W Amplifier Power RMS 305 W Max. SPL 1m / calc. 123 dB Frequency Range (-10 dB) 40 Hz to 130 Hz Nominal Coverage Angle Omnidirectional Audio Input XLR and 1/4" TRS combination Audio Output (LINK OUTPUT) XLR, balanced Digital Signal Processing 28/56-Bit, 48 kHz Crossover Frequency 100 Hz Product Dimensions (W x H x D) 661 x 507 x 574 mm Net Weight 31.3 kg Optional Accessories --- SH-118A, Dust Cover F01U270397
User's Manual |
Powerful, Lightweight PA Speakers for Any Application You'll be impressed by how easy it is to fill a room with powerful, pristine sound with Turbosound Milan M15 powered loudspeakers. This 15-inch, 1,100-watt speaker is perfect for live music applications, and just as appropriate for schools, churches, or even corporate A/V installations. The coverage is wide and consistent, and doesn't sound strange when you get out of the main coverage area - some of the major factors Sweetwater considers when we're designing live sound systems. Whether you use it as a PA speaker or a stage monitor you can expect tight and powerful lows, rich and detailed mids, and smooth highs from the Milan M15.
Turbosound Milan M15 Powered PA Speaker at a Glance:
- Composite cabinet makes this powerful speaker strong and lightweight
- Flexible input options for virtually any application
- Designed to serve double-duty as a floor monitor too
Composite cabinet makes this powerful speaker strong and lightweight
You'll notice the Milan M15 is remarkably lightweight for a 15-inch PA speaker, at just over 60 pounds. That's due to the cabinet design, which is made from injection-molded polypropylene. And if you look close you'll see a ribbed pattern on the cabinet's exterior (it's actually on the interior as well). That ribbing not only adds strength and rigidity, it also helps cut down on cabinet resonance. Basically, the Milan M15 lets you take advantage of a lighter, stronger design without compromising your sound quality.
Flexible input options and sound shaping for virtually any application
You can connect practically any sound source to the Milan M15, from your mixer's line outputs to instruments and microphones. And you've got two inputs available, so the Milan M15 is a perfectly viable solution for coffee shop performances with a guitar and vocal mic. It's also perfect for public speaking - in fact, there's a Speech/Music mode switch that optimizes the performance for those applications.
Designed to serve double-duty as a floor monitor too
The powerful sound and lightweight design make the Milan M15 an ideal main PA speaker, it's designed to serve you well as a stage monitor too. The trapezoidal design doesn't just make it easy to handle, it also angles the Milan M15 up at you when you place it on the side. Switch on the 100Hz low-cut filter, and now you've got a sweet-sounding floor monitor that won't add rumble to your stage sound.
Turbosound Milan M15 Powered PA Speaker Features:
- Active PA speaker with 15" LF driver and 1,100W Class-D power amp
- Klark Teknik DSP optimizes your sound with dynamic equalization and intelligent limiting
- Specially-designed waveguide gives you wide, consistent coverage with natural off-axis sound
- Bass and Treble EQ controls let you fine-tune your sound
- Dual-angle pole mount socket makes it easy to position for optimum sound coverage
- Injection-molded polypropylene enclosure is strong and lightweight
- Recessed carry handle makes transport and setup easier
- Front-panel LED indicators indicate if a signal is present, when limiting is occurring, and when signal is clipping
Get the Turbosound Milan M15 for powerful sound in a strong, lightweight design Specification | Detail | Powered | Yes | Power Configuration | Bi-amped | LF Driver Size | 15“ | LF Driver Power Amp | 1,000W (peak) Class-D | HF Driver Size | 1“ | HF Driver Power Amp | 100W (peak) Class-D | Frequency Range | 45Hz-18kHz (±3dB), 40Hz-20kHz (-10dB) | Maximum Peak SPL | 130 dB | Horizontal Coverage Angle | 90 degrees | Vertical Coverage Angle | 60 degrees | Enclosure Material | Polypropylene | Mounting Options | Pole, Floor Wedge, Fly | Inputs | 2 x XLR/TRS combo | Outputs | 1 x XLR | Height | 28.3“ | Width | 18“ | Depth | 14.5“ | Weight | 60.9 lbs. | Manufacturer Part Number | M15UL |
|
Specification Detail
Powered Yes
Power Configuration Bi-amped
LF Driver Size 15“
LF Driver Power Amp 500W Class D
HF Driver Size 1.75“
HF Driver Power Amp 500W Class D
Frequency Range 44Hz-20kHz (-10dB)
Crossover Frequency 2kHz
Maximum Peak SPL 133dB
Horizontal Coverage Angle 60 Degrees Axisymmetric
Vertical Coverage Angle 60 Degrees Axisymmetric
Enclosure Material 15mm Birch Plywood
Mounting Options Pole, Fly
Inputs 1 x Combo (XLR/TRS, Mic/Line), 1 x Combo (XLR/TRS, Line), 2 x RCA
Outputs 2 x XLR (Direct), 1 x XLR (Line)
Height 32.1“
Width 17.5“
Depth 15.2“
Weight 64 lbs.
Manufacturer Part Number KW152 |
The DBR15 achieves best-in-class SPL of up to132dB and delivers the lowest frequency in its lineup. The DBR15 delivers outstanding performance for the main front-of-house sound for the live performance or DJ events that require highly prominent low and more power. |
The new ETX Powered Loudspeakers family builds upon the industry-leading innovation and 85-year heritage of Electro-Voice audio engineering to offer the most advanced professional portable powered loudspeakers available today.
A versatile high-end choice for live entertainment venues, rental companies, pro musicians and DJs, and installed sound, the ETX Powered Loudspeakers family features three two-way models (10-inch, 12-inch and 15-inch, all with a precision HF titanium compression driver), a three-way model (15-inch with a 6.5-inch MF driver and a precision HF titanium compression driver) and two subs (15-inch and 18-inch drivers).
Positioned above the ZLX and Live X families respectively, ETX Powered Loudspeakers complete a trio of recent EV portable loudspeaker offerings-each of which was designed to bring best-in-class performance to its price point.
Inside each low-profile, tour-grade wood enclosure are a host of unique new features that set ETX Powered Loudspeakers apart, combining intelligent technology and innovative industrial design for spectacular results across all applications. EV-engineered high-efficiency transducers and high-powered Class-D amplifiers, Signal Synchronized Transducers (SST) waveguide design and smart FIR-Drive DSP all work together to provide peerless EV sound quality and precise coverage at the highest SPLs.
- 15-inch LF SMX woofer
- 1.25-inch HF titanium compression driver
- 2000 W Class-D power amplifier with integrated FIR-Drive DSP
- 135 dB peak SPL
Frequency Range | 40 Hz - 20 kHz | Maximum SPL | 135 dB peak dB | Power Consumption | 100 - 240 V~, 50 - 60 Hz, 1.6 - 0.8 A | Power Rating | 2000 W | Frequency Response | 48 Hz - 20 kHz | Coverage (Nominal -6 dB) H | 90 ° | Coverage (Nominal -6 dB) V | 60 ° | LF Transducer | SMX2150 380 mm (15 in) | HF Transducer | DH3-B 1.25-in titanium compression driver | Crossover Frequency | 1500 Hz | Connector Type | (2) XLR/TRS combo jack and (1) XLR link output | Enclosure Material | 18-mm, 13-ply birch plywood with EVCoat | Grill | 16AWG steel with powdercoat | Suspension | (8) M10 suspension points | Height | 691 mm (27.2“) | Width | 431 mm (16.97“) | Depth | 447 mm (17.6“) | Weight Net | 27.7 kg (61.07 lbs) | Shipping Weight | 31.5 kg (69.45 lbs) |
|
Reviews
There are no reviews yet.