| Content | User's manual [3,30 MB]
Production Partner 04/2014
DDQ 15 2-Way Touring Class Powered Loudspeaker with DSP
The LD Systems DDQ 15 is an ultra high efficiency 2-way biamped loudspeaker for FOH and monitor applications, delay lines, portable PA systems and fixed installations delivering superior touring class performance.
A 24-bit/48 kHz custom Sharc DSP provides volume control, delay, EQ, crossover, phase alignment and comprehensive protection functions for precision adjustment and reliable operation while its 1ms look-ahead limiter ensures distortion-free audio at all levels. In addition, the DDQ features digital encoding, a high pass filter and ground lift switch.
The 15” FaitalPRO neodymium woofer and BMS compression driver complement is biamped by two Hypex UcD700 Class D modules with high efficiency SMPS and extremely low noise and THD. With 1.400 watts RMS output, 38 Hz - 20 kHz frequency response, 80° x 50° dispersion and a peak SPL of 136 dB the DDQ 15 provides superior high-power audio performance.
The 15 mm birch ply bass reflex enclosure incorporates a 50° angle and asymmetrical HF horn rotatable for floor monitor use. The hardware includes a steel grille, multiple flying points and the innovative Evolutive handles for easy portability.
- Touring class active PA speakers with Sharc DSP (24bit/48kHz)
- Distortion free thanks to 1 millisecond predictive peak limiter
- State of the art analog/digital converters (127dB/113dB dynamic range)
- Max SPL (peak): 136dB
- 80° x 50° rotatable asymmetrical horn flare
- 38 - 20,000 Hz frequency response
- 2 x Hypex 700 Watt Class D amplifier modules
- 15" Faital Pro neodymium woofer
- 1.4" BMS compression driver
- Switchable high-pass filter
- 50° monitor angle
- 13 x M10 flying points
- Lightweight
- Made in Germany
Technical specification:
- Type: active
- Version: DSP controlled
- Woofer Size: 15“
- Woofer Size: 381 mm
- Woofer/Midrange Magnet: neodymium
- Woofer/Midrange Brand: Faital Pro
- Woofer Voice Coil: 3“
- Woofer Voice Coil: 75 mm
- Tweeter Size: 1.4“
- Tweeter Size: 35.6 mm
- Tweeter Magnet: ceramic
- Tweeter Brand: BMS
- Tweeter Voice Coil: 1.75“
- Tweeter Voice Coil: 44.4
- Amplifier: 2 x Class D, Hypex Ucd700
- Dispersion Angle (H x V): 80 x 50°
- Power Output (RMS): 1400 (2 x 700 W)
- Frequency Response: 38 - 20,000 Hz
- Crossover Frequency: 1300 Hz
- Max. SPL (continuous): 124 100 - 10,000 Hz dB
- Max. SPL (peak): 136 dB
- Integral Media Player: no
- Protection: RMS power supply limiter, RMS speakers limiter , over current, over voltage, DSP-based "look ahead" limiter
- Controls: power switch (On / Off), X-Over Sub, Gain, Ground Lift
- Indicators: Operate, Peak Limit, X-Over Sub, Signal
- Line Inputs: 1
- Line Input Connectors: XLR
- Line Outputs: 2
- Line Output Connectors: XLR
- Power Supply: switching power supply
- Operating Voltage: 180 - 264 V AC, 47 - 63 Hz
- Housing Material: 15/18 mm birch plywood
- Housing Surface: polyurea
- Cabinet Type: bass reflex
- Monitor Angle: 50°
- Width: 420 mm
- Height: 736 mm
- Depth: 488 mm
- Features: LD Systems Evolutive handles, flange 36 mm, 13 x M10 flying points, switchable high-pass filter
|
he das Audio dr speaker range combine the best of lightweight portability with premium quality sound performance and high output capabilities. The Dr 15a is a very portable self-powered system with an extremely efficient 15" woofer that is capable of a seriously impressive and very punchy bass & mid range output. A custom m-34 compression driver handles high frequency reproduction with a clean, smooth and dynamically transparent clarity. Each driver is powered directly by its own perfectly matched independent amplifier in this bi-amplified active system for maximum efficiency and incredible sound pressure levels. A built-in two-channel mixer comprises both microphone and line inputs, allowing for use in any format, with or without additional mixer or audio sources. Manufactured and designed by das, in Spain, the dr are constructed using the latest in, mechanics, magnetics, acoustics and electronics technology to create speakers that are tough, reliable and capable out performing any rival model their class.
TECHNICAL SPECIFICATIONS:
Mobile DJ, disco, PA or install use
200 Watt active speaker
Nominal LF power amplifier 150 Watt (AB)
Nominal HF power amplifier 50 Watt (AB)
127dB SPL
45Hz - 20kHz frequency range (-dB)
2 way
15" woofe speaker
1" compression driver
Female XLR-Jack input
LOOP THRU : Jack
Input Impedance line : 20 kohms; mic : 2 kohms
Polypropylene enclosure
35mm integral pole mount fitting
Black finish
Weight: 23.4kg (including packaging)
Height: 70.0cm x Width: 45.0cm x Depth: 36.0cm
Warranty: 12 months
Power: 240V / 110V Switchable
|
GENERAL
The PSA Systems JB-15 is the active variant of the PS-15. This active full range speaker has a built-in amplifier of the bi-amp type and delivers 300 watts RMS. In combination with the active crossover the audio signal is distributed efficiently on a woofer and tweeter. The PSA-15 has a 15-inch woofer, which effortlessly displays the low frequencies, starting at 40Hz. Here he is fed with less than 245 watts. The 1.35-inch compression driver takes it high for his account and get 55 watts of power. This was in fact the RMS power; peaks that are higher are no problem for the amplifier. You are assured of a solid, non-pinched sound.
JB Systems PSA-15 Speaker: Polypropylene
The PSA-15 has a smooth shaped casing made of polypropylene. A light but very strong type of plastic, which is good for long-term protection of the internal components. In addition, he is very practical, with a built-in carrying handle, M8 mounting points, a 35 mm stand adapter and support for monitor use. The latter is excellent as possible, thanks to the angle of the housing.
CONNECTIONS
The back contains the connections with two microphone inputs (XLR, 6.3 mm jack) and a line input (XLR, RCA). The inputs and outputs are balanced. As per the level can be controlled, there is also a master volume and a two-band tone control devices. The PSA 15 is very suitable for mobile use and permanent installation and can be used as PA speaker and be used as a monitor. Monitor Brackets are included. |
Features:
DH-1K 1.5-inch Titanium Diaphragm Compression Driver
EVS-15K 15-inch Woofer
124 dB max. SPL
500 W Class-D Amplifier
Integrated DSP with FIR filter
Cabinet
Powered two-way full-range speaker, 15" woofer, 1.5" compression driver, vented design
Maximum Amplifier Output Capability, IHF-A
500 W
Amplifier Power RMS
420 W
Max. SPL 1m / calc.
124 dB
Frequency Range (-10 dB)
50 Hz to 17 kHz
Nominal Coverage Angle
90° x 50° (Horizontal x Vertical)
Audio Input (LINE 1 or MIC/LINE 2)
XLR and 1/4" TRS combination
Audio Input (AUX)
Stereo RCA, unbalanced
Audio Output (LINK OUTPUT)
XLR, balanced
Digital Signal Processing
28/56-Bit, 48 kHz
Crossover Frequency
1.7 kHz
Product Dimensions (W x H x D)
708 x 432 x 382 mm
Net Weight
22.5 kg
Optional Accessories
---
SH-115A, Dust Cover
F01U270396
VPM 1500, variable speaker pole
F01U141047
BS 35, speaker stand
F01U141046 |
JBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System
Key Features :
Powered bi-amplified full-range loudspeaker with JBL DrivePack? technology for portable or installed use.
2200 Watts peak output power, 1100 Watts continuous.
HiQnet? compatible; network control.
15-inch Differential Drive? low-frequency driver for
extended low-frequency output.
60° x 40°coverage.
Stylized and ergonomically designed powder-coated
die cast aluminum handles.
Six 3-inch fly track suspension points and fourteen M10
fittings (optional detachable flying fittings and forged eye
bolt kits available).
Optional DPCN (CobraNet?) digital audio input
module available.
Specifications:
|
Frequency Range |
: |
34 Hz to 20 kHz (-10 dB) |
|
Frequency Response |
: |
43 Hz to 18 kHz ( ± 3 dB) |
|
Coverage Pattern |
: |
60°x 40° rotatable waveguide |
|
Directivity Factor (Q) |
: |
15.85 |
|
Directivity Index (DI) |
: |
12 dB |
|
Maximum Peak Output1 |
: |
138 dB SPL 1m |
|
Transducer Section |
|
|
|
Low Frequency Section |
: |
JBL 2265G, 381mm (15 in) dia.,
76mm (3 in) Dual Coil neodymium Differential Drive?, Direct Cooled |
|
Bandpass
Nominal Impedance |
: |
4 ohms |
|
Mid/High
Frequency Section |
: |
|
|
Mid Frequency |
: |
JBL CMCD-82H, 200mm (8in)
Dual Coil Differential? transducer |
|
High Frequency |
: |
JBL2452H-SL, 100mm (4in) titanium damped diaphragm, 1.5in. exit |
|
Waveguide |
: |
JBL PT-K64-MHF |
|
Bandpass
Nominal Impedance |
: |
8 ohms
|
|
System |
|
|
|
DP2 Internal
Amplification Output
(at nominal load) |
: |
2200 Watts Peak,
1100 Watts Continuous |
|
DP2 Output (Continuous
IEC shaped pink
noise into rated
load impedance) |
: |
750LF/350HF Watts |
|
DP2 Output Section |
: |
2-Channel, Class I |
|
Audio Input connector: |
: |
XLR with loop-through |
|
Network
Control Connector |
: |
Ethernet, RJ45 |
|
Signal Processing |
: |
DSP Based, resident in
Input Module |
|
System Management
|
: |
DSP based limiters for mechanical
and thermal protection |
|
AC Power
Operating Range |
: |
Auto Select 90-132VAC/
216-264VAC, 50/60Hz
|
|
AC Line Voltage |
: |
50/60 Hz, Auto-Detect; 120V/
240V (-15%, +10%) |
|
AC Input Connector |
: |
Neutrik PowerCon |
|
AC Loop-Thru |
: |
Neutrik PowerCon |
|
AC Current Requirement |
: |
6A per system at 120V, 3A per
system at 240V |
|
Enclosure |
|
|
|
Box Construction |
: |
5/8in. multi-ply exterior grade
Baltic birch. Internally braced.
Black DuraFlex? finish.
|
|
Suspension System |
: |
6 standard air-cargo 3 in. track
and 12 M10 fittings
|
|
Grille |
: |
14 Gauge Black powder-coated
perforated steel with foam backing
|
|
Dimensions
(H x W x D) |
: |
914.4 x 528.3 x 624.8mm
(36 x 20.8 x 24.6 in) |
|
Net Weight |
: |
44 kg (97 lb) | | Case Material 9-ply, 15mm Plywood, Internally Braced, with Texured Paint
Frequency Response (-3 dB) 56 Hz - 18 k Hz
Frequency Response (-10 dB) 44 Hz - 20 k Hz
Max. SPL/1m (calc) 134 dB
Coverage
(Nominal -6 dB) H° 90 °
Coverage
(Nominal -6 dB) V° 50 °
LF Transducer (1) EVS-15K, 381mm (15”) Woofer
HF Transducer DH-1K, 39mm (1.5”) Titanium Diaphragm Compression Driver
Crossover Frequency 1.7 k Hz
Connector Type (2) XLR/TRS Combo Jacks, (1) Stereo RCA, (1) XLR Link Output
Grill 18GA Steel with Black Powdercoat
Height 708 mm (27.87“)
Width 432 mm (17.01“)
Depth 382 mm (15.04“)
Weight Net 24.3 kg (53.57 lbs)
Shipping Weight 29.5 kg (65.04 lbs) |
Reviews
There are no reviews yet.