LD Systems DEEP2 1600 PA Power Amplifier 2 x 800 W 2 Ohms

750.00 incl. GR VAT

In stock

EAN: 4049521087264
Installments calculation
CompareAdd to wishlist Submit Better Price
The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why […]

 

Read more

The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products.

The DEEP2 series features a Clip Limiter as well as every common protection circuits. These amps are 2 Ohm and 4 Ohm (bridge) stable in continuous operation. On the rear panel you will find all the common In- and Outputs.

The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design.

The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio.

Product type
Power Amplifiers


Type
PA Power Amplifiers


Rated ouput power (1kHz @ 2 Ohms)
2 x 800 W


Rated ouput power (1kHz @ 4 Ohms)
2 x 650 W


Rated ouput power (1kHz @ 8 Ohms)
2 x 450 W


Rated ouput power (1kHz @ 4 Ohms, bridged)
1600 W


Rated ouput power (1kHz @ 8 Ohms, bridged)
1300 W


Output circuitry
Class H


Frequency response
20 – 20000 Hz


THD
< 0.1 %


Signal-to-noise ratio
106 dB


Damping factor
> 400


Crosstalk
>80 dB


Gain
39 dB


Input sensitivity
0.775 V


Protection circuits
clip limiter , DC protection , short circuit , thermal overload


Controls
2 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)


Indicators
level , Limit , Power , Protect (protection circuit engaged) , Signal


Loudspeaker outputs
2


Speaker output connections
Speakon compatible , Terminal posts


Cooling
highly efficient, automatic


Operating voltage
transformer


Operating voltage
230 V AC / 50-60 Hz


Weight
15,9 kg


Features
Volex mains socket

Weight 15.90 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems DEEP2 1600 PA Power Amplifier 2 x 800 W 2 Ohms”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems DEEP2 1600 PA Power Amplifier 2 x 800 W 2 Ohms removeINTERM L-2400 AMPLIFIER 2X750W removeRCF HC 1600: 1600 W, 2 IN, HIGH CURRENT STEREO POWER AMPLIFIERS removeBITTNER AUDIO XR2000-2X100W/4Ω POWER AMPLIFIER removeQSC GX-5 POWER AMPLIFIER 2x700W RMS @ 4Ω, 2x500W RMS @ 8Ω removeCROWN XTi-2002 2x800W 4Ω POWER AMPLIFIER remove
NameLD Systems DEEP2 1600 PA Power Amplifier 2 x 800 W 2 Ohms removeINTERM L-2400 AMPLIFIER 2X750W removeRCF HC 1600: 1600 W, 2 IN, HIGH CURRENT STEREO POWER AMPLIFIERS removeBITTNER AUDIO XR2000-2X100W/4Ω POWER AMPLIFIER removeQSC GX-5 POWER AMPLIFIER 2x700W RMS @ 4Ω, 2x500W RMS @ 8Ω removeCROWN XTi-2002 2x800W 4Ω POWER AMPLIFIER remove
Image
SKULDDP1600L-2400HC1600XR2000010001XTi-2002
Rating
Price 750.00 incl. GR VAT 1,198.00 incl. GR VAT 1,004.39 incl. GR VAT 2,814.80 incl. GR VAT 589.00 incl. GR VAT 777.00 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

Available on backorder

In stock

Only 1 left in stock (can be backordered)

AvailabilityIn stockAvailable on backorderAvailable on backorderAvailable on backorderIn stockOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products. The DEEP2 series features a Clip Limiter as well as every common protection circuits. These amps are 2 Ohm and 4 Ohm (bridge) stable in continuous operation. On the rear panel you will find all the common In- and Outputs. The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design. The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio. Product type Power Amplifiers
Type PA Power Amplifiers
Rated ouput power (1kHz @ 2 Ohms) 2 x 800 W
Rated ouput power (1kHz @ 4 Ohms) 2 x 650 W
Rated ouput power (1kHz @ 8 Ohms) 2 x 450 W
Rated ouput power (1kHz @ 4 Ohms, bridged) 1600 W
Rated ouput power (1kHz @ 8 Ohms, bridged) 1300 W
Output circuitry Class H
Frequency response 20 - 20000 Hz
THD < 0.1 %
Signal-to-noise ratio 106 dB
Damping factor > 400
Crosstalk >80 dB
Gain 39 dB
Input sensitivity 0.775 V
Protection circuits clip limiter , DC protection , short circuit , thermal overload
Controls 2 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)
Indicators level , Limit , Power , Protect (protection circuit engaged) , Signal
Loudspeaker outputs 2
Speaker output connections Speakon compatible , Terminal posts
Cooling highly efficient, automatic
Operating voltage transformer
Operating voltage 230 V AC / 50-60 Hz
Weight 15,9 kg
Features Volex mains socket
L2400 750W-750W 4ohm (500W-500W 8ohm) COMPACT MODERN DESIGN Compact size (2U-Rack Height) with up to 1200W per channel@2ohms these amps save valuable rack space without compromising power output. HIGH CURRENT TOROIDAL TRANSFORMER A high-current toroidal transformer saves rack space and minimizes hum and noise. EXCELLENT SOUND QUALITY The low T.H.D.(0.05%) and high damping factor (400 or higher) gives excellent sound quality. 2 STAGE POWER SUPPLY The high-power units (L1800 and L2400) have a 2-Stage Class-H design that maximizes their performance. EQUIPPED WITH 30Hz or 50Hz HPF All amplifiers are equipped with high-pass filters on each channel to help maintain sound quality, yet help protect the loudspeakers. EXTENSIVE PROTECTION CIRCUITS Extensive protection circuits monitor over voltage/current conditions, overheating, output shorts, and DC voltage to improve performance and reliability. CLIP-LIMITER CIRCUITS Clip-limiters on each channel are provided to help prevent distortion due to excessive signal levels. L.E.D FUNCTION DISPLAYS Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged) LEDs on the front panel indicate the status of the unit in operation.

This professional stereo power amplifier, working in class-H mode, provides 2x800W, at an efficiency of around 85%.

A passive transformer based power supply and hand selected components makes this power rating possible with exceptional audio quality and absolute reliability, even in the 2 Ohm mode. The output stage is fully protected against over-temperature, short circuit, RFI and equipped with soft start circuit and temperature-controlled fan cooling.  The integral soft clip limiter protects against damage to the connected loudspeakers.  The activity of a protective circuit, signal and limiter is shown for each channel by LEDʼs.

 

AMPLIFIER SPECIFICATIONS
Power output stereo 2Ω:2 x 800 Watt rms 
Power output stereo 4Ω:2 x 650 Watt rms 
Power output stereo 8Ω:2 x 350 Watt rms 
Power output bridged 4Ω:1600 Watt rms 
Power output bridged 8Ω:1300 Watt rms 
Frequency Response:20 Hz ÷ 20 kHz  
Signal/noise rate:> 103 dB 
Crosstalk:> 70 dB 
Distortion (THD+N): 
Intermodulation: 
Damping factor:200:1 (8 Ω) 
Slew rate:50 V/μS 
INPUT SECTION
Input connector:2 x XLR balanced, 6,3mm jack unbalanced 
Input sensitivity:0 / 0.775 dBm/V RMS 
Input impedance: 20.000 kΩ 
Controls:Volume control for each channel 
OUTPUT SECTION
Output connector:2 x Neutrik Speakon 4 ways 
SYSTEM PARAMETERS
Cooling:Two-speed fan 
Protections:Temperature, DC, RFI short circuit, Soft-Start, Thermal on transformer 
POWER REQUIREMENT
Operating voltage:220÷240 / 110÷120 ~ 50 / 60 V ~ Hz  
Max.current:7.5 A 
Power Consumption:2700 W 
PHYSICAL SPECIFICATIONS
Height:88 / 3.46 mm/inch 
Width:483 / 19.01 mm/inch 
Depth:455 / 17.91 mm/inch 
Net Weight:19.5 / 42.98 Kg/Lbs 
SHIPPING INFORMATION
Package height:150 / 5.9 mm/inch 
Package width:555 / 21.85 mm/inch 
Package depth:525 / 20.66 mm/inch 
Shipping Weight:20 / 44.09 Kg/Lbs

 

XR Series - Intelligent Power
New Horizons.

A lightweight with enormous power output. Combined with digital signal processing.
That's what we call flexibility! Locally controlled or completely networked.
No matter what the requirements are.
The integrated powerful digital signal processor (DSP) and controller allows
for a troublefree and easy adjustment to any acoustical environment.
Wear-free digital potentiometers, sequential remote power on,
alive contacts for easy supervision, computer controlled monitoring -
 its enless list of useful feature make it the right choice for any installation.
XR - the new definition of Intelligent Power

High Tech SMT Design
Digital Signal Processor
Excellent sound and superior impulse response
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX / Speakon
High-End Switched Power Supply with Power Factor Correction (not XR4000)
LED Indicators for SIGNAL, CLIP, PROTECT, POWER
Temperature controlled, variable speed low noise fans
Digital wear-free Volume Controls (can be operated manually)
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Paging Input
Monitor Output
SXL Dataport
Perfect Weight-to-Power ratio
3 Years Warranty

Technical Data:
XR 2000:  2x 1400 W @ 2 Ohm
              2x 1000 W @ 4 Ohm
Class:  H
Frequency Response:20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.02%
Signal-to-Noise Ratio:  < -106 dB
Channel Seperation:  > 85 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Damping Factor:  750 to 1200 @ 4 Ohm
Cooling:  4 Fans (temp. reg. variable speed)
Weight:  8 kg
Dimensions:  2 RU / 483 x 88 x 454 mm(19" x 3.5" x 17.9“)

- Signal to Noise (20 Hz - 20 kHz): 100 dB
- Input Sensitivity: 1.2 Vrms
- Voltage Gain (8 Ohms): 34.4 dB
- Output Circuitry: 2-tier Class H
- Power Requirements: 6A
- Frequency Response: 20 Hz - 20 kHz, +0, 1 dB
- Dynamic Headroom (4 Ohms): 2 dB
- Damping Factor: 100
- Input Impedance: Greater than 20k (balanced)
- Maximum Input Level: +24 dB (16 Vrms)
- Input Connectors (each channel): 3-pin XLR and 1/4-inch TRS, balanced, parallel Phono, unbalanced
- Output Connectors (each channel): Speakon, 1/4-inch, Binding Posts
- Amplifier and Load Protection: Short circuit, open circuit, thermal, RF protection Load protected against DC faults
- Rear Panel Controls: Full Range / Crossover switch
- Dimensions (H x W x D): 3.5 x 19 x 10.1 inches (89 mm x 483 mm x 257 mm)
- Weight: 26 lbs (12 kg)

Front Panel Controls and Indicators:
- Gain controls, 21 detents
- Red Clip LEDs, proportional, 0.1% THD threshold
- Green Signal LEDs, threshold -35 dB
- Blue Power LED, AC on


Stereo Mode:
- 8 Ohms / both channels driven: 500 Watts
- 8 Ohms / single channel driven: 600 Watts
- 4 Ohms / both channels driven: 700 Watts
- 4 Ohms / single channel driven: 850 Watts

Distortion:
- 8 Ohms: less than 0.05%
- 4 Ohms: less than 0.1%

Dimensions and Weight in Packaging
Shipping Weight: 31 lbs
Shipping Dimensions: 24 x 15 x 7 in

Crown XTi2002 Specifications: * Output Power 2 ohms Stereo (per ch): 1000W * Output Power 4 ohms Stereo (per ch): 800W * Output Power 8 ohms Stereo (per ch): 475W * Output Power 8 ohms Bridged-Mono: 1600W * Output Power 4 ohms Bridged-Mono: 2000W * Sensitivity (for full rated power at 4 ohms): 1.4 Vrms * Frequency Response (at 1 watt, 20 Hz - 20 kHz): +0 dB, –1 dB * Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms): 100 dB (A weighted) * Total Harmonic Distortion (THD): * Damping Factor 20 Hz to 1 kHz: > 500 * Crosstalk (below rated power): 20 kHz - 1 kHz: > 70 db * Input Impedance (nominal): 20k ohms balanced, 10k ohms unbalanced * Maximum Input Signal: +22 dBu typical * Operating Temperature: 0°C to 40°C at 95% relative humidity (non-condensing) * Level Control: Two front-panel rotary level controls, one for each channel * Power Switch Control: On/Off switch applies AC power to the amplifier * Sel/Prev/Next Buttons Controls: Three buttons near the LCD screen that are used to access menu items and front panel lockout * LCD Screen: Backlit liquid crystal display that shows preset and processing status * Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs). * –10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip. * –20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip. * Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio. * Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion * Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions * Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power * Input Connectors: XLR, one per channel * Link/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel. * Output Connectors: Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon® connectors). * HiQnet™ USB Connector: Type B, connects to HiQnet™ network. * Chassis: Steel * Front Panel: Cast-aluminum * Cooling: Proportional speed fan with front-to-rear airflow. * Dimensions: 19" (W) x 3.5" (H) x 12.25" (D) * Net Weight: 18.5 lbs (8.4kg) * Shipping Weight: 21.5 lbs (9.8kg)
Weight15.90 kg15.60 kg20.00 kg9.00 kg12.60 kg9.80 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 15.90 kg
Weight 15.60 kg
Weight 20.00 kg
Weight 9.00 kg
Weight 12.60 kg
Weight 9.80 kg