LD Systems DEEP2 2400 X PA Power Amplifier 2 x 1200 W 2 ohm

799.00 incl. GR VAT

In stock

EAN: 4049521111846
Installments calculation
CompareAdd to wishlist Submit Better Price
The DP2400X is the newest member of the DEEP2 family of power amplifiers. In response to requests by many customers, we expanded this series with a new, powerful amplifier that is also compatible with 2-ohm systems. The key specifications are 2 x 1200 W at 2 ohms, 2 x 950 W at 4 ohms and […]

 

Read more

The DP2400X is the newest member of the DEEP2 family of power amplifiers.

In response to requests by many customers, we expanded this series with a new, powerful amplifier that is also compatible with 2-ohm systems. The key specifications are 2 x 1200 W at 2 ohms, 2 x 950 W at 4 ohms and 2 x 600 W at 8 ohms RMS power. Like the other power amplifiers in the DEEP2 series, the DP2400X uses class H circuitry powered by a conventional power supply. The protective circuitry is also identical with that used in the DEEP2 series. It also follows the DEEP2 design in its integration of two temperature-dependent two step cooling fans. One special feature is a switchable 12 dB low-cut and/or 12 dB low-pass filter adjustable from 25 Hz to 150 Hz on both channels. This makes it possible to use the DP2400X as a bass amp or even realize a powerful bi-amping system. With the filters switched off, it becomes a conventional 2 channel power amp.

Product type
Power Amplifiers


Type
PA Power Amplifiers


Rated ouput power (1kHz @ 2 Ohms)
2 x 1200 W


Rated ouput power (1kHz @ 4 Ohms)
2 x 950 W


Rated ouput power (1kHz @ 8 Ohms)
2 x 600 W


Rated ouput power (1kHz @ 4 Ohms, bridged)
2200 W


Rated ouput power (1kHz @ 8 Ohms, bridged)
1800 W


Output circuitry
Class H


Frequency response
20 – 20000 Hz


THD
< 0.1 %


Signal-to-noise ratio
106 dB


Damping factor
> 450


Crosstalk
>76 dB


Gain
39 dB


Input sensitivity
0.775 V


Protection circuits
clip limiter , DC protection , short circuit , thermal overload


Controls
2 x highpass/lowpass (switchable) , 2 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)


Indicators
level , Limit , Power , Protect (protection circuit engaged) , Signal


Loudspeaker outputs
2


Speaker output connections
Speakon compatible , Terminal posts


Cooling
highly efficient, automatic


Operating voltage
transformer


Operating voltage
230 V AC / 50-60 Hz


Weight
17,6 kg


Features
Volex mains socket

Weight 17.60 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems DEEP2 2400 X PA Power Amplifier 2 x 1200 W 2 ohm”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems DEEP2 2400 X PA Power Amplifier 2 x 1200 W 2 ohm removeMC2 Audio E15 POWER AMPLIFIER 2 x 850w 4ohm removeCROWN XTi-2002 2x800W 4Ω POWER AMPLIFIER removeRAM AUDIO S-1500 Power Amplifier 2x880 Watts removeINTERM L-1800 AMPLIFIER 2X600W removePHONIC MAX-2500 PLUS Power Amplifier 2x750W remove
NameLD Systems DEEP2 2400 X PA Power Amplifier 2 x 1200 W 2 ohm removeMC2 Audio E15 POWER AMPLIFIER 2 x 850w 4ohm removeCROWN XTi-2002 2x800W 4Ω POWER AMPLIFIER removeRAM AUDIO S-1500 Power Amplifier 2x880 Watts removeINTERM L-1800 AMPLIFIER 2X600W removePHONIC MAX-2500 PLUS Power Amplifier 2x750W remove
Image
SKULDDP2400XE15XTi-2002S-1500L-1800H06PH00017
Rating
Price 799.00 incl. GR VAT 2,079.48 incl. GR VAT 777.00 incl. GR VAT 1,160.64 incl. GR VAT 1,186.00 incl. GR VAT 449.00 incl. GR VAT
Stock

In stock

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

AvailabilityIn stockAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe DP2400X is the newest member of the DEEP2 family of power amplifiers. In response to requests by many customers, we expanded this series with a new, powerful amplifier that is also compatible with 2-ohm systems. The key specifications are 2 x 1200 W at 2 ohms, 2 x 950 W at 4 ohms and 2 x 600 W at 8 ohms RMS power. Like the other power amplifiers in the DEEP2 series, the DP2400X uses class H circuitry powered by a conventional power supply. The protective circuitry is also identical with that used in the DEEP2 series. It also follows the DEEP2 design in its integration of two temperature-dependent two step cooling fans. One special feature is a switchable 12 dB low-cut and/or 12 dB low-pass filter adjustable from 25 Hz to 150 Hz on both channels. This makes it possible to use the DP2400X as a bass amp or even realize a powerful bi-amping system. With the filters switched off, it becomes a conventional 2 channel power amp. Product type Power Amplifiers
Type PA Power Amplifiers
Rated ouput power (1kHz @ 2 Ohms) 2 x 1200 W
Rated ouput power (1kHz @ 4 Ohms) 2 x 950 W
Rated ouput power (1kHz @ 8 Ohms) 2 x 600 W
Rated ouput power (1kHz @ 4 Ohms, bridged) 2200 W
Rated ouput power (1kHz @ 8 Ohms, bridged) 1800 W
Output circuitry Class H
Frequency response 20 - 20000 Hz
THD < 0.1 %
Signal-to-noise ratio 106 dB
Damping factor > 450
Crosstalk >76 dB
Gain 39 dB
Input sensitivity 0.775 V
Protection circuits clip limiter , DC protection , short circuit , thermal overload
Controls 2 x highpass/lowpass (switchable) , 2 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)
Indicators level , Limit , Power , Protect (protection circuit engaged) , Signal
Loudspeaker outputs 2
Speaker output connections Speakon compatible , Terminal posts
Cooling highly efficient, automatic
Operating voltage transformer
Operating voltage 230 V AC / 50-60 Hz
Weight 17,6 kg
Features Volex mains socket

Number of Channels: 2

Output Power: (per channel)

8 ohms     450W
4 ohms  850W
2 ohms 1550W



Output Power: (bridged)

8 ohms 1700W
4 ohms 3100W


THD%: (@1dB below max output)

@ 1kHz

Crown XTi2002 Specifications: * Output Power 2 ohms Stereo (per ch): 1000W * Output Power 4 ohms Stereo (per ch): 800W * Output Power 8 ohms Stereo (per ch): 475W * Output Power 8 ohms Bridged-Mono: 1600W * Output Power 4 ohms Bridged-Mono: 2000W * Sensitivity (for full rated power at 4 ohms): 1.4 Vrms * Frequency Response (at 1 watt, 20 Hz - 20 kHz): +0 dB, –1 dB * Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms): 100 dB (A weighted) * Total Harmonic Distortion (THD): * Damping Factor 20 Hz to 1 kHz: > 500 * Crosstalk (below rated power): 20 kHz - 1 kHz: > 70 db * Input Impedance (nominal): 20k ohms balanced, 10k ohms unbalanced * Maximum Input Signal: +22 dBu typical * Operating Temperature: 0°C to 40°C at 95% relative humidity (non-condensing) * Level Control: Two front-panel rotary level controls, one for each channel * Power Switch Control: On/Off switch applies AC power to the amplifier * Sel/Prev/Next Buttons Controls: Three buttons near the LCD screen that are used to access menu items and front panel lockout * LCD Screen: Backlit liquid crystal display that shows preset and processing status * Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs). * –10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip. * –20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip. * Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio. * Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion * Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions * Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power * Input Connectors: XLR, one per channel * Link/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel. * Output Connectors: Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon® connectors). * HiQnet™ USB Connector: Type B, connects to HiQnet™ network. * Chassis: Steel * Front Panel: Cast-aluminum * Cooling: Proportional speed fan with front-to-rear airflow. * Dimensions: 19" (W) x 3.5" (H) x 12.25" (D) * Net Weight: 18.5 lbs (8.4kg) * Shipping Weight: 21.5 lbs (9.8kg)The S Series of RAM Audio amplifiers distils all these features to fulfill all your needs, whether youʼre starting a P.A. amplifier project from scratch, or you need to upgrade your present sound reinforcement equipment. In the S Series amps, you'll find five 2-channel models and five 4-channel models, all offering plentiful power levels at low distortion in the range of 1.5 to 6 kilowatts, yet weighing in around 8 kilos and 30 cm deep. • Ultra-compact and lightweight 2-U high • Laser cut aluminum front panels with integrated carrying handles • Neutrik® XLR input connectors, input and signal link in 2 channel models • Input Link switch: allow daisy-chaining of the input signal • Neutrik® Speakon® output connectors • Detented sealed potentiometers for easy recall of volume settings • ICL™, PMS™, Hi-temp, Signal indicators per channel • Power on and Stand-by leds • Highly versatile with multiple configuration and additional module options • Full PC control via EtheRAM (with EtheRAM Control module) • Switchable ICL™ clip-limiters per channel • Switchable (30-50 Hz) sub-sonic highpass filter per channel • Three-position gain selector (26, 32 or 38 dB) • Dual or bridge mode selector • Twin temperature controlled, back to front cooling fans • Oversized power components (high SOA reserve specification) Standard Signal Inputs Module: The S Series amps are equipped as standard with twin Neutrik® XLR, doubled by two other XLR connectors for linking purposes. In the 4 Channel models an XLR input per channel is provided with the signal linking facility. Analog Processor Module: permits a very easy, user-friendly signal processing to enable the amp to set up a bi-amp system without any other outboard device. These are the Processor's main characteristics: • 2-way stereo crossover (dual mono or single bridged sub output) • 24dB/oct Linkwitz-Riley configurable crossover (90, 100 o 120Hz) • Adjustable attenuation in the High-pass outputs (-3, -6 or -9dB) • Adjustable Limiter, relative to Max. Output (-3, -6 or -9dB) DSP44_S Module: Digital Signal Processor fully programmable through an USB port. These are the Processor's main characteristics: • 4 Inputs/4 Outputs or 2 In/2 Out free route configurable. • 24 bits/192 kHz 256x Oversampling Converters. • Output Delay: 0 to 7.1 meters (20.69ms) per channel. • XOver: Up to 48dB/oct Butterworth, Linkwitz-Riley and Bessel. • EQ: 9 filters per channel (Parametric, Shelving, LP,HP,BP,SB). • Gain, Mute and Phase inversion per channel. • RMS Power and Peak Voltage output limiter per channel. • Real Time operation from USB or front panel configuration. Standard Signal Inputs Module EtheRAM Control Module Ethernet Audio Transport (Coming soon) Analog Processor Module DSP44_S Module EtheRAM Control Module AES/EBU Digital Input (Coming soon) back_s_l
OUTPUT POWER S-1500 S-2000 S-3000 S-4000 S-6000 S-3004 S-4004 S-4044 S-6004 S-6044
1kHz, 1.0% THD
2 ohms 2x880W 2x1190W 2x1570W 2x1950W 2x2950W 4x700W 4x980W - 4x1440W -
4 ohms 2x575W 2x790W 2x1100W 2x1380W 2x2025W 4x500W 4x670W 4x975W 4x1000W 4x1480W
8 ohms 2x325W 2x460W 2x630W 2x810W 2x1250W 4x300W 4x430W 4x690W 4x620W 4x1015W
Bridge @ 4ohms 1760W 2380W 3140W 3900W 5900W 2x1400W 2x1960W - 2x2880W -
Bridge @ 8ohms 1150W 1580W 2200W 2760W 4050W 2x1000W 2x1340W 2x1950W 2x2000W 2x2960W
P. N. 12dB C.F.
2 ohms 2x975W 2x1360W 2x2060W 2x2460W 2x4225W 4x890W 4x1170W - 4x2080W -
4 ohms 2x610W 2x880W 2x1240W 2x1600W 2x2600W 4x580W 4x820W 4x1230W 4x1280W 4x2110W
Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz Phase Response (@1W 20Hz-20kHz): ±15deg Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >75dB Voltage Gain (selectable): 26/32/38 dB Sensitivity: 1500:2.6/1.3/0.6V 2000:3.0/1.5/0.8V 3000:3.6/1.8/0.9V 4000:4.0/2.0/1.0V 6000:5.0/2.5/1.3V 3004:2.6/1.3/0.6V 4004:3.0/1.5/0.8V 4044:3.7/1.9/0.9V 6004:3.5/1.8/0.9V 6044:5.0/2.5/1.3V Signal to noise ratio: 1500:112dB 2000:113dB 3000:115dB 4000:116dB 6000:118dB 3004:112dB 4004:113dB 4044:116dB 6004:116dB 6044:118dB Required AC Mains (@4ohms 1/8 r.p.): 1500:4A 2000:4.8A 3000:6.2A 4000:7.5A 6000:10.5A 3004:6A 4004:7.5A 4044:11A 6004:10.5A 6044:15A Dimensions (WxHxD): 483x88.9x310 mm - 19x3.5x12.2 inches Weight (Net): 1500/2000: 8Kg - 17.6Lbs 3000/4000/3004/4004/4044: 8.5Kg-18.7Lbs 6000/6004/6044: 8.6Kg-18.9Lbs Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply,ICL™, PMS™, SSP™
L1800 600W-600W 4ohm (360W-360W 8ohm) COMPACT MODERN DESIGN Compact size (2U-Rack Height) with up to 1200W per channel@2ohms these amps save valuable rack space without compromising power output. HIGH CURRENT TOROIDAL TRANSFORMER A high-current toroidal transformer saves rack space and minimizes hum and noise. EXCELLENT SOUND QUALITY The low T.H.D.(0.05%) and high damping factor (400 or higher) gives excellent sound quality. 2 STAGE POWER SUPPLY The high-power units (L1800 and L2400) have a 2-Stage Class-H design that maximizes their performance. EQUIPPED WITH 30Hz or 50Hz HPF All amplifiers are equipped with high-pass filters on each channel to help maintain sound quality, yet help protect the loudspeakers. EXTENSIVE PROTECTION CIRCUITS Extensive protection circuits monitor over voltage/current conditions, overheating, output shorts, and DC voltage to improve performance and reliability. CLIP-LIMITER CIRCUITS Clip-limiters on each channel are provided to help prevent distortion due to excessive signal levels. L.E.D FUNCTION DISPLAYS Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged) LEDs on the front panel indicate the status of the unit in operation.Phonic\'s MAX 2500 Power Amplifier provides 1500 Watts of power at 8 ohms (bridge mono) or 750 Watts at 4 ohms (stereo)- ideal for medium to large-size clubs, churches, auditoriums and more. Input to the MAX 2500 amp is achieved via combo connectors that accept both XLR and 1/4\' jacks, and output is achieved through either Speakon?-type connectors or binding posts. The MAX 2500 features ground switches, user defeatable clip limiters, selectable high pass filters, and the option to choose between stereo, parallel and bridge operating modes, making this amplifier ideal for real world application.
  • Output power: 750W @ 4 Ohms stereo, 500W @ 8 Ohms stereo
  • High-current toroidal transformers for greater power and low noise
  • Independent user-defeatable peak limiters reduce distortion
  • Selectable High-Pass filter at 30Hz or 50Hz
  • XLR and 1/4\' TRS input jacks
  • Binding post and Speakon?-type outputs
  • Front mounted gain controls for easy access
  • Signal and Peak LED indicators to monitor performance
  • Short circuit, thermal, subsonic, RF protection, output DC offset
  • Power on/off muting
Weight17.60 kg12.00 kg9.80 kg8.00 kg15.60 kg18.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 17.60 kg
Weight 12.00 kg
Weight 9.80 kg
Weight 8.00 kg
Weight 15.60 kg
Weight 18.00 kg