LD Systems DEEP2 2400 X PA Power Amplifier 2 x 1200 W 2 ohm

799.00 incl. GR VAT

In stock

EAN: 4049521111846
Installments calculation
CompareAdd to wishlist Submit Better Price
The DP2400X is the newest member of the DEEP2 family of power amplifiers. In response to requests by many customers, we expanded this series with a new, powerful amplifier that is also compatible with 2-ohm systems. The key specifications are 2 x 1200 W at 2 ohms, 2 x 950 W at 4 ohms and […]

 

Read more

The DP2400X is the newest member of the DEEP2 family of power amplifiers.

In response to requests by many customers, we expanded this series with a new, powerful amplifier that is also compatible with 2-ohm systems. The key specifications are 2 x 1200 W at 2 ohms, 2 x 950 W at 4 ohms and 2 x 600 W at 8 ohms RMS power. Like the other power amplifiers in the DEEP2 series, the DP2400X uses class H circuitry powered by a conventional power supply. The protective circuitry is also identical with that used in the DEEP2 series. It also follows the DEEP2 design in its integration of two temperature-dependent two step cooling fans. One special feature is a switchable 12 dB low-cut and/or 12 dB low-pass filter adjustable from 25 Hz to 150 Hz on both channels. This makes it possible to use the DP2400X as a bass amp or even realize a powerful bi-amping system. With the filters switched off, it becomes a conventional 2 channel power amp.

Product type
Power Amplifiers


Type
PA Power Amplifiers


Rated ouput power (1kHz @ 2 Ohms)
2 x 1200 W


Rated ouput power (1kHz @ 4 Ohms)
2 x 950 W


Rated ouput power (1kHz @ 8 Ohms)
2 x 600 W


Rated ouput power (1kHz @ 4 Ohms, bridged)
2200 W


Rated ouput power (1kHz @ 8 Ohms, bridged)
1800 W


Output circuitry
Class H


Frequency response
20 – 20000 Hz


THD
< 0.1 %


Signal-to-noise ratio
106 dB


Damping factor
> 450


Crosstalk
>76 dB


Gain
39 dB


Input sensitivity
0.775 V


Protection circuits
clip limiter , DC protection , short circuit , thermal overload


Controls
2 x highpass/lowpass (switchable) , 2 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)


Indicators
level , Limit , Power , Protect (protection circuit engaged) , Signal


Loudspeaker outputs
2


Speaker output connections
Speakon compatible , Terminal posts


Cooling
highly efficient, automatic


Operating voltage
transformer


Operating voltage
230 V AC / 50-60 Hz


Weight
17,6 kg


Features
Volex mains socket

Weight 17.60 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems DEEP2 2400 X PA Power Amplifier 2 x 1200 W 2 ohm”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems DEEP2 2400 X PA Power Amplifier 2 x 1200 W 2 ohm removeCROWN XTi-2002 2x800W 4Ω POWER AMPLIFIER removeBITTNER AUDIO XR2000-2X100W/4Ω POWER AMPLIFIER removeINTERM L-1800 AMPLIFIER 2X600W removeQSC GX-7 POWER AMPLIFIER 2x1000W RMS @ 4Ω, 2x725W RMS @ 8Ω removeRCF ED 1100: 1100 W, 2 IN, EXTENDED DYNAMIC STEREO POWER AMPLIFIER remove
NameLD Systems DEEP2 2400 X PA Power Amplifier 2 x 1200 W 2 ohm removeCROWN XTi-2002 2x800W 4Ω POWER AMPLIFIER removeBITTNER AUDIO XR2000-2X100W/4Ω POWER AMPLIFIER removeINTERM L-1800 AMPLIFIER 2X600W removeQSC GX-7 POWER AMPLIFIER 2x1000W RMS @ 4Ω, 2x725W RMS @ 8Ω removeRCF ED 1100: 1100 W, 2 IN, EXTENDED DYNAMIC STEREO POWER AMPLIFIER remove
Image
SKULDDP2400XXTi-2002XR2000L-1800010002ED1100
Rating
Price 799.00 incl. GR VAT 777.00 incl. GR VAT 2,814.80 incl. GR VAT 1,186.00 incl. GR VAT 695.00 incl. GR VAT 716.10 incl. GR VAT
Stock

In stock

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityIn stockOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe DP2400X is the newest member of the DEEP2 family of power amplifiers. In response to requests by many customers, we expanded this series with a new, powerful amplifier that is also compatible with 2-ohm systems. The key specifications are 2 x 1200 W at 2 ohms, 2 x 950 W at 4 ohms and 2 x 600 W at 8 ohms RMS power. Like the other power amplifiers in the DEEP2 series, the DP2400X uses class H circuitry powered by a conventional power supply. The protective circuitry is also identical with that used in the DEEP2 series. It also follows the DEEP2 design in its integration of two temperature-dependent two step cooling fans. One special feature is a switchable 12 dB low-cut and/or 12 dB low-pass filter adjustable from 25 Hz to 150 Hz on both channels. This makes it possible to use the DP2400X as a bass amp or even realize a powerful bi-amping system. With the filters switched off, it becomes a conventional 2 channel power amp. Product type Power Amplifiers
Type PA Power Amplifiers
Rated ouput power (1kHz @ 2 Ohms) 2 x 1200 W
Rated ouput power (1kHz @ 4 Ohms) 2 x 950 W
Rated ouput power (1kHz @ 8 Ohms) 2 x 600 W
Rated ouput power (1kHz @ 4 Ohms, bridged) 2200 W
Rated ouput power (1kHz @ 8 Ohms, bridged) 1800 W
Output circuitry Class H
Frequency response 20 - 20000 Hz
THD < 0.1 %
Signal-to-noise ratio 106 dB
Damping factor > 450
Crosstalk >76 dB
Gain 39 dB
Input sensitivity 0.775 V
Protection circuits clip limiter , DC protection , short circuit , thermal overload
Controls 2 x highpass/lowpass (switchable) , 2 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)
Indicators level , Limit , Power , Protect (protection circuit engaged) , Signal
Loudspeaker outputs 2
Speaker output connections Speakon compatible , Terminal posts
Cooling highly efficient, automatic
Operating voltage transformer
Operating voltage 230 V AC / 50-60 Hz
Weight 17,6 kg
Features Volex mains socket
Crown XTi2002 Specifications: * Output Power 2 ohms Stereo (per ch): 1000W * Output Power 4 ohms Stereo (per ch): 800W * Output Power 8 ohms Stereo (per ch): 475W * Output Power 8 ohms Bridged-Mono: 1600W * Output Power 4 ohms Bridged-Mono: 2000W * Sensitivity (for full rated power at 4 ohms): 1.4 Vrms * Frequency Response (at 1 watt, 20 Hz - 20 kHz): +0 dB, –1 dB * Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms): 100 dB (A weighted) * Total Harmonic Distortion (THD): * Damping Factor 20 Hz to 1 kHz: > 500 * Crosstalk (below rated power): 20 kHz - 1 kHz: > 70 db * Input Impedance (nominal): 20k ohms balanced, 10k ohms unbalanced * Maximum Input Signal: +22 dBu typical * Operating Temperature: 0°C to 40°C at 95% relative humidity (non-condensing) * Level Control: Two front-panel rotary level controls, one for each channel * Power Switch Control: On/Off switch applies AC power to the amplifier * Sel/Prev/Next Buttons Controls: Three buttons near the LCD screen that are used to access menu items and front panel lockout * LCD Screen: Backlit liquid crystal display that shows preset and processing status * Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs). * –10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip. * –20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip. * Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio. * Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion * Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions * Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power * Input Connectors: XLR, one per channel * Link/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel. * Output Connectors: Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon® connectors). * HiQnet™ USB Connector: Type B, connects to HiQnet™ network. * Chassis: Steel * Front Panel: Cast-aluminum * Cooling: Proportional speed fan with front-to-rear airflow. * Dimensions: 19" (W) x 3.5" (H) x 12.25" (D) * Net Weight: 18.5 lbs (8.4kg) * Shipping Weight: 21.5 lbs (9.8kg)

XR Series - Intelligent Power
New Horizons.

A lightweight with enormous power output. Combined with digital signal processing.
That's what we call flexibility! Locally controlled or completely networked.
No matter what the requirements are.
The integrated powerful digital signal processor (DSP) and controller allows
for a troublefree and easy adjustment to any acoustical environment.
Wear-free digital potentiometers, sequential remote power on,
alive contacts for easy supervision, computer controlled monitoring -
 its enless list of useful feature make it the right choice for any installation.
XR - the new definition of Intelligent Power

High Tech SMT Design
Digital Signal Processor
Excellent sound and superior impulse response
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX / Speakon
High-End Switched Power Supply with Power Factor Correction (not XR4000)
LED Indicators for SIGNAL, CLIP, PROTECT, POWER
Temperature controlled, variable speed low noise fans
Digital wear-free Volume Controls (can be operated manually)
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Paging Input
Monitor Output
SXL Dataport
Perfect Weight-to-Power ratio
3 Years Warranty

Technical Data:
XR 2000:  2x 1400 W @ 2 Ohm
              2x 1000 W @ 4 Ohm
Class:  H
Frequency Response:20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.02%
Signal-to-Noise Ratio:  < -106 dB
Channel Seperation:  > 85 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Damping Factor:  750 to 1200 @ 4 Ohm
Cooling:  4 Fans (temp. reg. variable speed)
Weight:  8 kg
Dimensions:  2 RU / 483 x 88 x 454 mm(19" x 3.5" x 17.9“)

L1800 600W-600W 4ohm (360W-360W 8ohm) COMPACT MODERN DESIGN Compact size (2U-Rack Height) with up to 1200W per channel@2ohms these amps save valuable rack space without compromising power output. HIGH CURRENT TOROIDAL TRANSFORMER A high-current toroidal transformer saves rack space and minimizes hum and noise. EXCELLENT SOUND QUALITY The low T.H.D.(0.05%) and high damping factor (400 or higher) gives excellent sound quality. 2 STAGE POWER SUPPLY The high-power units (L1800 and L2400) have a 2-Stage Class-H design that maximizes their performance. EQUIPPED WITH 30Hz or 50Hz HPF All amplifiers are equipped with high-pass filters on each channel to help maintain sound quality, yet help protect the loudspeakers. EXTENSIVE PROTECTION CIRCUITS Extensive protection circuits monitor over voltage/current conditions, overheating, output shorts, and DC voltage to improve performance and reliability. CLIP-LIMITER CIRCUITS Clip-limiters on each channel are provided to help prevent distortion due to excessive signal levels. L.E.D FUNCTION DISPLAYS Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged) LEDs on the front panel indicate the status of the unit in operation.

- Power levels matched to the most popular speakers used by entertainers
- Optimized for maximum real-world headroom into 4 ohm and 8 ohm speaker systems
- Inputs: XLR, 1/4" TRS and phono input connectors for compatibility with any source
- Outputs: Speakon(R) combo accepts, 1/4" (TS) plugs or Speakon 2-pole and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems
- Minimum depth chassis (10.1“/257 mm) fits in compact, inexpensive effects racks
- Lightweight - GX7 is only 15.5 lbs (7 kg)
- Detented gain controls for precise setting and matching of sensitivity
- GuardRail(TM) automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
- Front panel LEDs monitor Power, Signal and Clipping
- Subwoofer/Satellite crossover built-in
- 230V 16.5 lbs (7.5 kg)

Weight17.60 kg9.80 kg9.00 kg15.60 kg7.00 kg17.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 17.60 kg
Weight 9.80 kg
Weight 9.00 kg
Weight 15.60 kg
Weight 7.00 kg
Weight 17.00 kg