LD Systems DEEP2 2400 X PA Power Amplifier 2 x 1200 W 2 ohm

799.00 incl. GR VAT

In stock

EAN: 4049521111846
Installments calculation
CompareAdd to wishlist Submit Better Price
The DP2400X is the newest member of the DEEP2 family of power amplifiers. In response to requests by many customers, we expanded this series with a new, powerful amplifier that is also compatible with 2-ohm systems. The key specifications are 2 x 1200 W at 2 ohms, 2 x 950 W at 4 ohms and […]

 

Read more

The DP2400X is the newest member of the DEEP2 family of power amplifiers.

In response to requests by many customers, we expanded this series with a new, powerful amplifier that is also compatible with 2-ohm systems. The key specifications are 2 x 1200 W at 2 ohms, 2 x 950 W at 4 ohms and 2 x 600 W at 8 ohms RMS power. Like the other power amplifiers in the DEEP2 series, the DP2400X uses class H circuitry powered by a conventional power supply. The protective circuitry is also identical with that used in the DEEP2 series. It also follows the DEEP2 design in its integration of two temperature-dependent two step cooling fans. One special feature is a switchable 12 dB low-cut and/or 12 dB low-pass filter adjustable from 25 Hz to 150 Hz on both channels. This makes it possible to use the DP2400X as a bass amp or even realize a powerful bi-amping system. With the filters switched off, it becomes a conventional 2 channel power amp.

Product type
Power Amplifiers


Type
PA Power Amplifiers


Rated ouput power (1kHz @ 2 Ohms)
2 x 1200 W


Rated ouput power (1kHz @ 4 Ohms)
2 x 950 W


Rated ouput power (1kHz @ 8 Ohms)
2 x 600 W


Rated ouput power (1kHz @ 4 Ohms, bridged)
2200 W


Rated ouput power (1kHz @ 8 Ohms, bridged)
1800 W


Output circuitry
Class H


Frequency response
20 – 20000 Hz


THD
< 0.1 %


Signal-to-noise ratio
106 dB


Damping factor
> 450


Crosstalk
>76 dB


Gain
39 dB


Input sensitivity
0.775 V


Protection circuits
clip limiter , DC protection , short circuit , thermal overload


Controls
2 x highpass/lowpass (switchable) , 2 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)


Indicators
level , Limit , Power , Protect (protection circuit engaged) , Signal


Loudspeaker outputs
2


Speaker output connections
Speakon compatible , Terminal posts


Cooling
highly efficient, automatic


Operating voltage
transformer


Operating voltage
230 V AC / 50-60 Hz


Weight
17,6 kg


Features
Volex mains socket

Weight 17.60 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems DEEP2 2400 X PA Power Amplifier 2 x 1200 W 2 ohm”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems DEEP2 2400 X PA Power Amplifier 2 x 1200 W 2 ohm removeLD Systems LDSP1K8 Professional Power Amplifier 2 x 880 W 2 Ohm removeRCF HC 1600: 1600 W, 2 IN, HIGH CURRENT STEREO POWER AMPLIFIERS removeInterM V-2000 Power amplifier 2Χ550W/4ohm, 2Χ300W/8ohm, 2Χ900W/2ohm removeBITTNER AUDIO BASIC 1200-2x600W-4Ω POWER AMPLIFIER removeCrown DSI-2000 2x800W-4Ω Power Amplifier remove
NameLD Systems DEEP2 2400 X PA Power Amplifier 2 x 1200 W 2 ohm removeLD Systems LDSP1K8 Professional Power Amplifier 2 x 880 W 2 Ohm removeRCF HC 1600: 1600 W, 2 IN, HIGH CURRENT STEREO POWER AMPLIFIERS removeInterM V-2000 Power amplifier 2Χ550W/4ohm, 2Χ300W/8ohm, 2Χ900W/2ohm removeBITTNER AUDIO BASIC 1200-2x600W-4Ω POWER AMPLIFIER removeCrown DSI-2000 2x800W-4Ω Power Amplifier remove
Image
SKULDDP2400XLDSP1K8HC1600V-2000BASIC1200DSI-2000
Rating
Price 799.00 incl. GR VAT 1,727.50 incl. GR VAT 1,004.39 incl. GR VAT 504.06 incl. GR VAT 1,068.39 incl. GR VAT 1,161.00 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

In stock

Available on backorder

Available on backorder

AvailabilityIn stockAvailable on backorderAvailable on backorderIn stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe DP2400X is the newest member of the DEEP2 family of power amplifiers. In response to requests by many customers, we expanded this series with a new, powerful amplifier that is also compatible with 2-ohm systems. The key specifications are 2 x 1200 W at 2 ohms, 2 x 950 W at 4 ohms and 2 x 600 W at 8 ohms RMS power. Like the other power amplifiers in the DEEP2 series, the DP2400X uses class H circuitry powered by a conventional power supply. The protective circuitry is also identical with that used in the DEEP2 series. It also follows the DEEP2 design in its integration of two temperature-dependent two step cooling fans. One special feature is a switchable 12 dB low-cut and/or 12 dB low-pass filter adjustable from 25 Hz to 150 Hz on both channels. This makes it possible to use the DP2400X as a bass amp or even realize a powerful bi-amping system. With the filters switched off, it becomes a conventional 2 channel power amp. Product type Power Amplifiers
Type PA Power Amplifiers
Rated ouput power (1kHz @ 2 Ohms) 2 x 1200 W
Rated ouput power (1kHz @ 4 Ohms) 2 x 950 W
Rated ouput power (1kHz @ 8 Ohms) 2 x 600 W
Rated ouput power (1kHz @ 4 Ohms, bridged) 2200 W
Rated ouput power (1kHz @ 8 Ohms, bridged) 1800 W
Output circuitry Class H
Frequency response 20 - 20000 Hz
THD < 0.1 %
Signal-to-noise ratio 106 dB
Damping factor > 450
Crosstalk >76 dB
Gain 39 dB
Input sensitivity 0.775 V
Protection circuits clip limiter , DC protection , short circuit , thermal overload
Controls 2 x highpass/lowpass (switchable) , 2 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)
Indicators level , Limit , Power , Protect (protection circuit engaged) , Signal
Loudspeaker outputs 2
Speaker output connections Speakon compatible , Terminal posts
Cooling highly efficient, automatic
Operating voltage transformer
Operating voltage 230 V AC / 50-60 Hz
Weight 17,6 kg
Features Volex mains socket

The new LD Premium Audio CLASS-H SMPS amplifiers distils all the features to fulfill all your needs, whether youʼre starting a P.A. amplifier project from scratch, or you need to upgrade your present sound reinforcement equipment. In the LD Premium amps, you'll find four 2-channel models, all offering plentiful power levels at low distortion in the range of 1.5 to 6 kilowatts, yet weighing in around 8 kilos and 30 cm deep.

  • Model Name: SP1K8
  • Output Power 1 kHz, 500
  • Crosstalk (20 Hz - 20 kHz): > 75 dB
  • Voltage Gain (selectable): 26/32/38 dB
  • Input Sensitivity: 2.6/1.3/0.6 V
  • Protection: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, ICLTM, PMSTM, SSPTM
  • Controls: On / Off Switch, Volume, Voltage Gain, Dual / Link Switchable, Bridge Mode Configuration Switch
  • Indicators: Signal, Temperature, ICL (Inteligent Clip Limiting), PMS (Power Management System)
  • Connectors:
    • Input: 2 x XLR
    • Line Output: 2 x XLR
    • Speaker Output: 2 x Speakon
  • Power Supply: 230 V - 50 Hz
  • Dimensions (WxHxD): 483 × 88.9 × 310 mm / 19 × 3.5 ×12.2 inches

This professional stereo power amplifier, working in class-H mode, provides 2x800W, at an efficiency of around 85%.

A passive transformer based power supply and hand selected components makes this power rating possible with exceptional audio quality and absolute reliability, even in the 2 Ohm mode. The output stage is fully protected against over-temperature, short circuit, RFI and equipped with soft start circuit and temperature-controlled fan cooling.  The integral soft clip limiter protects against damage to the connected loudspeakers.  The activity of a protective circuit, signal and limiter is shown for each channel by LEDʼs.

 

AMPLIFIER SPECIFICATIONS
Power output stereo 2Ω:2 x 800 Watt rms 
Power output stereo 4Ω:2 x 650 Watt rms 
Power output stereo 8Ω:2 x 350 Watt rms 
Power output bridged 4Ω:1600 Watt rms 
Power output bridged 8Ω:1300 Watt rms 
Frequency Response:20 Hz ÷ 20 kHz  
Signal/noise rate:> 103 dB 
Crosstalk:> 70 dB 
Distortion (THD+N): 
Intermodulation: 
Damping factor:200:1 (8 Ω) 
Slew rate:50 V/μS 
INPUT SECTION
Input connector:2 x XLR balanced, 6,3mm jack unbalanced 
Input sensitivity:0 / 0.775 dBm/V RMS 
Input impedance: 20.000 kΩ 
Controls:Volume control for each channel 
OUTPUT SECTION
Output connector:2 x Neutrik Speakon 4 ways 
SYSTEM PARAMETERS
Cooling:Two-speed fan 
Protections:Temperature, DC, RFI short circuit, Soft-Start, Thermal on transformer 
POWER REQUIREMENT
Operating voltage:220÷240 / 110÷120 ~ 50 / 60 V ~ Hz  
Max.current:7.5 A 
Power Consumption:2700 W 
PHYSICAL SPECIFICATIONS
Height:88 / 3.46 mm/inch 
Width:483 / 19.01 mm/inch 
Depth:455 / 17.91 mm/inch 
Net Weight:19.5 / 42.98 Kg/Lbs 
SHIPPING INFORMATION
Package height:150 / 5.9 mm/inch 
Package width:555 / 21.85 mm/inch 
Package depth:525 / 20.66 mm/inch 
Shipping Weight:20 / 44.09 Kg/Lbs

 

InterM V-2000 Power amplifier 2Χ550W/4ohm, 2Χ300W/8ohm, 2Χ900W/2ohm bridge 1900W/4ohm

BASIC Series - Intelligent Power

BASIC - that's meeting the tightest budgets and professional requirements
in reliability, flexibility and sound. Alone or in combination with the other
products of the Bittner portfolio.
The consequent realisation of the Bittner quality standards indicates once
more our understanding of the contracting business. It underlines our philosophy
that cost consciousness has nothing to do with giving up standards. Compromise
is a word unknown to Bittner Audio!
The incorporation of detent potentiometers, clip limiter, protection circuits for
any imaginable situation, as well as a first-class production process using only
highest-quality components made the BASIC series the choice of most contractors.

Certainly more than basic!

High Tech SMT design
Excellent sound and superior impulse response
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
XLR Inputs
Speakon and Binding Posts
Clip Limiter
Toroidal transformers
LED Indicators for SIGNAL, CLIP, PROTECT, POWER
Temperature controlled, variable speed, low noise fans
Detent potentiometers
Stereo / Bridged / Parallel Mode
Ground Lift
Robust Steel Chassis
3 Year Warranty

TECHNICAL DATA:
Basic 1200:  2x 600 W @ 4 Ohm
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD: < 0.03%
Signal-to-Noise Ratio: < -102 dB
Channel Seperation: > 85 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Damping Factor:  > 400 @ 4 Ohm
Cooling:  2x Fan (temp. reg. variable speed)
Weight:  15 kg.
Dimensions : 2 RU / 483 x 88 x 454 mm (19" x 3.5" x 17.9“)

Crown DSi 2000 2x800W-4Ω Power Amplifier

The Crown? DSi 2000 power amplifier shall be a solid-state two-channel model with a switch-mode universal power supply. A rear-panel HD-15 connector shall provide input/output connectivity between the DSi amplifier and the DSi-8M System Monitor.

The outputs shall be usable as stereo or bridged-mono modes of operation.

The bridged-mono mode shall bridge the outputs to provide increased output voltage.

Front panel controls and indicators shall include the following:

Level: Detented rotary level control, one per channel.

Power Switch: On/off switch applies AC power to the amplifi er.

Sel/Prev/Next Buttons: Three buttons near the LCD screen shall be used to access menu items and front panel lockout.

LCD Screen: Backlit liquid crystal display shows speaker presets and signal processing.

Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input.

?10 Indicator: Green LED fl ashes when output signal exceeds ?10 dB below clip.

?20 Indicator: Green LED fl ashes when output signal level exceeds ?20 dB below clip.

Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio.

Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion.

Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions.

Power Indicator: Blue LED illuminates when the amplifi er has been turned on and has power.

Rear panel controls and connectors shall include the following:

AC Line Connector: NEMA 5-15P (15A).

Input Connector: Two 3-pin removable Phoenix-type connectors each accept a balanced line-level input signal.

Output Connectors: 4-position barrier strip with connectors for dual louspeakers or bridge-mono loudspeaker.

HiQnet USB Connector: Type B, connects to a HiQnet network.

HD-15 Connector: For cinema I/O compatibility with DSi-8M System Monitor.

The amplifier shall have the following specifications:

Output Power: 2 ohm Stereo (per channel): 1,000W with 1% THD, 4 ohm

Stereo (per channel): 800W with 0.5% THD, 8 ohm Stereo (per channel) 475W

with 0.5% THD, 4 ohm Bridge-Mono: 2,000W with 1% THD, 8 ohm Bridge-

Mono: 1,600W with 0.5% THD.

Voltage Gain at 1kHz, 8 ohm rated output: 26 dB.

Frequency Response: +0/?1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms.

Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo

mode, 4 to 16 ohms in Bridge-Mono mode.

Sensitivity at 8 ohm rated output: 3.09V.

Sensitivity at 4 ohm rated output: 2.84V.

Sensitivity at 2 ohm rated output: 2.24V.

Signal to Noise Ratio (below rated 8-ohm power at 1 kHz): 105 dB

(A weighted).

Damping Factor: Better than 500 from 20 Hz to 500 Hz.

Crosstalk: > 70 dB below rated power, 20 Hz to 1 kHz.

Input Stage: Input is electronically balanced and employs precision 1% resistors.

Input Impedance (nominal): 20 k ohms, balanced;10 k ohms,unbalanced.

Maximum Input Signal: +22 dBu typical.

Weight17.60 kg8.00 kg20.00 kg10.50 kg15.00 kg9.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 17.60 kg
Weight 8.00 kg
Weight 20.00 kg
Weight 10.50 kg
Weight 15.00 kg
Weight 9.00 kg