JB Systems CPX 8 diaphragm

 diaphragm CPX 8

Also suitable for 

Foster and Fostex N30, 025H30, 025H27, H025N30, H025N27, H025N08, FT300H, N08, PHT-404, PHT-405, PHT-406, PHT-408, PHT-410, PHT-411, PHT-412, PHT-413, PHT404, PHT405, PHT406, PHT408, PHT410, PHT411, PHT412, PHT413, PH-404, PH-405, PH-406, PH-408, PH-410, PH-411, PH-412, PH-413, PH404, PH405, PH406, PH408, PH410, PH411, PH412, PH413, HT-404, HT-405, HT-406, HT-408, HT-410, HT-411, HT-412, HT-413, HT404, HT405, HT406, HT408, HT410, HT411, HT412, HT413, PAD26S driver / horn. And Cerwin Vega, H25, H-25, H 25, HO25, HO 25, HO-25 HO-25B, H25-F, H25F, HO25F, HO25-F, CT15, CT-15, CT 15, V-15, V-9 V-30X, V35C, V-43, PD-18B, D-32V, SM-12, SM-15, DMT-1, DDMT driver / Dynacord MX8/ horn.

 This diaphragm is used by many loudspaker manufacturers.PAS, Carvin, Peavey, Yamaha, Powerworks, HK and many others.

This diaphragm has a copper voice coil on a Nomex former and a Phenolic dome just like the original Fostex / Foster diaphragm
Specifications
8 ohm DCR is 6.9 +or- 8% Overall diaphragm diameter 1 3/4-in or 45mm Overall length 2 3/4-in or 70mm Voice coil diameter 1-in or 25mm 

 Replacement diaphragm kit for 22XT driver

 FOR HV1200, PR1500, 1522HC, CL-2, CL-1, 115 Int. Series III Oak, HKS-15, 115TF, 112TI, 115TI, HV1280, PR1280, SP2XT, SP4XT, SP5XT, DJS1800, 112SE, Impulse 200, SP2G, SP4G, SP5G, Impulse 200P 112DLM, 115DLM, SP112M, SP115M, Impulse 200 4 Ohm, SP3G, SP6G, Impulse 1280, 115CM, 115TF, Impulse 1282, HV1282, 112TLM, 115TLM, Impulse 200 8 Ohm, 1522TLS,Ιmpulse 500, DS1502, DS1803, DS3003, 1545TI, MF1-X/MK-3 Series, SP2Ti, SP4Ti, SP5Ti, 115 Int. HC, 118 Int. HC, 3020HT, 1245M, HDH-1, 112PS, HDH-4, 115TF Bleached Oak Enc., Impulse 500 4 Ohm Impulse 500P

• JBL D8R2406 is a genuine JBL replacement diaphragm for the 2406H-1 Driver.
• Fits JBL MPRO 400 Series
• 8 Ohm

• Peavey Factory Speaker RX22, 22XT, 22XT+ Original Diaphragm Part # 00452400
• NEW! Now used for ALL 22 series drivers: RX22, 22A, 22XT, 22XT+
• Voice coil: 2" (50mm)
• Diameter: 4-1/2" (115mm)
• Impedance: 8 ohm
• Titanium dome with edge wound copper clad aluminum voice coil on high temp composite bobbin
• Installation instructions, Ferro Fluid, and new mounting bolts included on new diaphragms starting mid 2015Please check your model before ordering to make sure you are getting the correct diaphragm.

• Replacement diaphragm kit for 14XT™driver

for Impulse 100, TLS-2, TLS 2X, TLS-4, TLS-5, TLS 5X, TLM-2, TLM-5,Impulse 100P, Impulse 100 White, PR 10, PR 12, PR 15, SSE-10,SSE-12, SSE-15, SSE-6, SSE-26

• Peavey 14XT Diaphragm Part # 00442500
• Voice coil: 1-3/8" (35.5mm)
• Diameter: 2-3/4" (70mm)
• Impedance: 8 ohms, Re: 6.8 ohms
• Titanium dome with edge wound voice coil on Kapton former
• Fits Peavey Driver and Cabinet Models:
  
  Peavey: 14A, 14-A, 14 A, 14XT, 14-XT, 14 XT, Impulse 100, TLS-2, TLS2, TLS 2X, TLS-4, TLS4, TLS-5, TLS 5X, TLS5X, TLM-2, TLM-5, Impulse 100P, Impulse 100 White, SSE-10, SSE-12, SSE-15, SSE-6, SSE-26, 00442510, and many more!
  
  Please check your model before ordering to make sure you are getting the correct diaphragm.