LD Systems DJ800 Power Amplifier 2 x 400 W 4 Ohm

Discontinued

350.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price

LD Systems DJ800 Power AmplifierThe DJ800 is the most powerful power amplifier in LD Systems’ DJ series. The dependable Class AB design has an output of 400W per channel @ 4 ohms, 2x 240W @ 8 ohms and 800W in switchable bridge mode. Weighing in at just 10 kg, it is perfect for mobile use, but also for installation.

The DJ800 is equipped with extensive protection circuitry and a power-on delay. The front panel perforations and a low-noise fan keep the amp cool. XLR and stereo TRS sockets are used as inputs and Speakon-compatible sockets and heavy-duty screw terminals as outputs. A ground lift switch eliminates ground loop hum. LEDs on the front panel next to the easy-grip volume controls indicate functional status, overloading, and triggering of the protection circuit.

The DJ800 functions in the entire frequency range of 20Hz – 20kHz with maximum dependability, dynamics, and impulse fidelity.

LD Systems DJ800 Power AmplifierThe DJ800 is the most powerful power amplifier in LD Systems’ DJ series. The dependable Class AB design has an output of 400W per channel @ 4 ohms, 2x 240W @ 8 ohms and 800W in switchable bridge mode. Weighing in at just 10 kg, it is perfect for mobile use, but also for installation.

The DJ800 is equipped with extensive protection circuitry and a power-on delay. The front panel perforations and a low-noise fan keep the amp cool. XLR and stereo TRS sockets are used as inputs and Speakon-compatible sockets and heavy-duty screw terminals as outputs. A ground lift switch eliminates ground loop hum. LEDs on the front panel next to the easy-grip volume controls indicate functional status, overloading, and triggering of the protection circuit.

The DJ800 functions in the entire frequency range of 20Hz – 20kHz with maximum dependability, dynamics, and impulse fidelity.

 

Read more

LD Systems DJ800 Power AmplifierThe DJ800 is the most powerful power amplifier in LD Systems’ DJ series. The dependable Class AB design has an output of 400W per channel @ 4 ohms, 2x 240W @ 8 ohms and 800W in switchable bridge mode. Weighing in at just 10 kg, it is perfect for mobile use, but also for installation.

The DJ800 is equipped with extensive protection circuitry and a power-on delay. The front panel perforations and a low-noise fan keep the amp cool. XLR and stereo TRS sockets are used as inputs and Speakon-compatible sockets and heavy-duty screw terminals as outputs. A ground lift switch eliminates ground loop hum. LEDs on the front panel next to the easy-grip volume controls indicate functional status, overloading, and triggering of the protection circuit.

The DJ800 functions in the entire frequency range of 20Hz – 20kHz with maximum dependability, dynamics, and impulse fidelity.

Weight 11.00 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems DJ800 Power Amplifier 2 x 400 W 4 Ohm”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems DJ800 Power Amplifier 2 x 400 W 4 Ohm removeINTERM R-300 PLUS Power Amplifier removeBEHRINGER EP2000 EUROPOWER STEREO AMPLIFIER 2x350W 8Ω 2x500W 4Ω removeINTERM R-150 PLUS AMPLIFIER 2X75W removeAMERICAN AUDIO VLP-1000 Power Amplifier 2x500 Watts removeDYNACORD SL-1200 / 230V 1200 Watts 8Ω remove
NameLD Systems DJ800 Power Amplifier 2 x 400 W 4 Ohm removeINTERM R-300 PLUS Power Amplifier removeBEHRINGER EP2000 EUROPOWER STEREO AMPLIFIER 2x350W 8Ω 2x500W 4Ω removeINTERM R-150 PLUS AMPLIFIER 2X75W removeAMERICAN AUDIO VLP-1000 Power Amplifier 2x500 Watts removeDYNACORD SL-1200 / 230V 1200 Watts 8Ω remove
Image
SKULDDJ800R-300 PLUSE005275R-150 PLUSE003175E009274
Rating
Price 350.00 incl. GR VAT 571.00 incl. GR VAT 434.00 incl. GR VAT 459.00 incl. GR VAT 592.00 incl. GR VAT 830.00 incl. GR VAT
Stock

Out of stock

In stock

Available on backorder

In stock

In stock

In stock

AvailabilityOut of stockIn stockAvailable on backorderIn stockIn stockIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
LD Systems DJ800 Power AmplifierThe DJ800 is the most powerful power amplifier in LD Systems' DJ series. The dependable Class AB design has an output of 400W per channel @ 4 ohms, 2x 240W @ 8 ohms and 800W in switchable bridge mode. Weighing in at just 10 kg, it is perfect for mobile use, but also for installation. The DJ800 is equipped with extensive protection circuitry and a power-on delay. The front panel perforations and a low-noise fan keep the amp cool. XLR and stereo TRS sockets are used as inputs and Speakon-compatible sockets and heavy-duty screw terminals as outputs. A ground lift switch eliminates ground loop hum. LEDs on the front panel next to the easy-grip volume controls indicate functional status, overloading, and triggering of the protection circuit. The DJ800 functions in the entire frequency range of 20Hz - 20kHz with maximum dependability, dynamics, and impulse fidelity.
Content
LD Systems DJ800 Power AmplifierThe DJ800 is the most powerful power amplifier in LD Systems' DJ series. The dependable Class AB design has an output of 400W per channel @ 4 ohms, 2x 240W @ 8 ohms and 800W in switchable bridge mode. Weighing in at just 10 kg, it is perfect for mobile use, but also for installation. The DJ800 is equipped with extensive protection circuitry and a power-on delay. The front panel perforations and a low-noise fan keep the amp cool. XLR and stereo TRS sockets are used as inputs and Speakon-compatible sockets and heavy-duty screw terminals as outputs. A ground lift switch eliminates ground loop hum. LEDs on the front panel next to the easy-grip volume controls indicate functional status, overloading, and triggering of the protection circuit. The DJ800 functions in the entire frequency range of 20Hz - 20kHz with maximum dependability, dynamics, and impulse fidelity.

Reference Quality Power Amplifier [R-300 Plus]

  • Controls :
    Front : Power on/off switch, attenuator, LED indicator
    Rear : Mode seletor switch, Stereo/bridged mono switch
  • Connectors :
    Input : 1 XLR, 1/4" balanced per channel
    Output : 5-way binding post and SpeakonTM per channel
  • Indicators :
    Power : Green, Protection : Red, Clip : Red, Signal : Green
  • Power Source : 100-120VAC or 220-240VAC; 50/60Hz
    (supplied AC mains transformer depends on country requirements)
  • Power Consumption : 250W(2.4A)
  • Weight : 8.4kg/18.5lb
  • Dimensions (WxHxD) : 482x88x317mm/19x3.5x12.5in
  • 2Χ350W 8Ω 2x500W 4Ω 2x650W  STEREO MODE


  • BRIDGE 2000W 4 Ω
  • 16Kg

  • 2 x 1,000 Watts into 2 Ohms; 2 x 750 Watts into 4 Ohms; 2,000 Watts into 4 Ohms (bridge mode)
  • Precise Power, Signal and Clip LEDs to monitor performance
  • XLR and 1/4" TRS input connectors for compatibility with any source
  • Professional speaker connectors and "touch-proof” binding posts support most speaker wiring systems
  • Selectable low-frequency filters (30 Hz or 50 Hz) remove distracting infra-sound frequencies
  • Independent limiters per channel offer reliable protection against overload and distortion
  • High-current toroidal transformer for ultra-high transient response and absolute reliability
  • Ultra-reliable Toshiba/Fairchild power transistors
  • Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
  • “Back-to-front” ventilation system including air filter for reliable operation
  • “Built-like-a-tank,” impact-resistant, all-steel 2U rackmount chassis
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany

Power Output Level R-150 PLUS

STEREO
8ohm(T.H.D 0.05%)  50W+50W
4ohm(T.H.D 0.05%)  75W+75W

BRIDGED MONO
8ohm(T.H.D 0.05%)  50W
8ohm(T.H.D 0.5%)  170W

Frequency Response 20Hz- 20kHz, ±0.5dB

Convection Cooled

SoftStart Protection System

Balanced 10kΩ@0.775V Inputs

- Output Power:
500W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD
330W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD
- Bridge Mode, Mono 820W RMS @ 8 Ohms, 1K Hz, 1% THD
- Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms)
- Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz - 20K Hz
- Slew Rate: 15V Per usec
- Damping Factor: @ 8 Ohm: 300
- Impedance: 20 Ohms balanced / 10 Ohms unbalanced
- Cooling System: 2 individual fans
- Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift; Limiter
- build in clip limiter
- Input: XLR 3pin + Jack 6,3mm
- output: Speakon + Binding post
- Dimensions (LxWxH): 360 x 482 x 88mm 2-rack mount spaces
- Weight: 15 KG.

Solid DYNACORD amplifier technology at highly competitive prices.
These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.
The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.
Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 900 W, 4 Ω - 600 W, 8 Ω - 380 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 1700 W, 4 Ω - 950 W, 8 Ω - 480 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 1800 W, 8 Ω - 1200 W Input Sensitivity, rated power @ 8 Ω, 1 kHz +3.1 dBu (1.11 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class AB Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 14.8 kg (32.6 lbs)

Weight11.00 kg8.40 kg16.00 kg7.20 kg15.00 kg14.80 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 11.00 kg
Weight 8.40 kg
Weight 16.00 kg
Weight 7.20 kg
Weight 15.00 kg
Weight 14.80 kg