LD Systems U 500 GM 530 CC Gooseneck Conference Microphone

U 500 Conference Microphone

70 Hz - 18 kHz frequency response

45.6 cm gooseneck with luminous ring

3-pin XLR connector

Providing a 70 Hz - 18 kHz frequency response, the U 500 Conference Microphone features a cardioid back-electret condenser capsule on a 45.6 cm gooseneck with luminous ring and 3-pin XLR connector. It requires the U 500 microphone base (sold separately, item no. , LDU505CST, LDU506CST, or LDU508CST).

• PA microphone with rugged, all-metal body
• Frequency response optimized for intelligibility
• Long useful life even in tough day-to-day usage
• Frequency response tailored to speech use

The DST 99 S is mounted on a table stand with an on/off switch and coiled cable with 3-pin XLR connector.

Ticket window, bank counter
Reception desk, restaurant
Houses of worship

Polar pattern    cardioid
Frequency range    150-15,000 Hz
Sensitivity    2.2 mV/Pa (-54 dBV)
Max. SPL    133 dB (1% THD)
Equivalent noise level    21 dB-A
Signal/noise ratio (A-weighted)    73 dB
Impedance    530 ohms
Recommended load impedance    >2,000 ohms
Connector    3-pin male XLR
Finish    matte black
Net weight    805 g (1.8 lbs.)
Shipping weight    1,125 g (2.5 lbs.)

 Shure MX412SE/C 12-inch (30 cm) Gooseneck Condenser Microphone, Shock Mount, Flange Mount, 10-foot (3 m) Side-Exit Cable (or Bottom-Exit), Snap-Fit Foam Windscreen, In-Line Preamp, Cardioid.

Shure Microflex MX412SE/C microphones are miniature gooseneck-mounted electret condenser microphones designed for speech and vocal pickup. Their high sensitivity and broad frequency range make them suitable for recording, as well as sound reinforcement applications.

The MX412SE/C microphone can be screwed onto a mic stand or the supplied 5/8 inch 27-threaded flange. They can be easily changed from side-exit to bottom-exit to conceal the cable. All models include an in-line preamplifier and a 3 m (10 ft) cable. Each microphone is available with interchangeable cardioid, supercardioid, or omnidirectional cartridges.

• Cardioid polar pattern
• 10 m (33 ft.) cable
• 125° pickup angle
• Especially suited for choir recordings
• Integrated spring steel clamp for optimum alignment

The new CHM 99 Condenser Hanging Microphone provides both ease of use and a high level of functionality. There is hardly any more affordable and simpler solution for recording choirs at worship centers. Suspended from the ceiling or a beam, the hanging microphone is aligned and then fixed in the correct position. Now use the spring steel clamp to adjust the correct angle, and off you go!
The CHM 99 is available in white or black.

XY stereo recording

Using two CHM 99 hanging microphones in an XY configuration (coincident pair) is a good way to make stereo recordings, particularly of choirs. However, sound source locations are defined only by intensity differences. Adjusting the angle between the microphones determines the width and depth of the stereo image.

ORTF stereo recording

Developed by the French Broadcasting Authority, this technique differs from the XY technique by recording not only intensity differences, but also delay differences. The capsules are aligned at an angle of precisely 110° and 170 mm / 6.7 in. apart.

Shure MX418D-C Gooseneck Cardioid Condenser Microphone

Microflex? Gooseneck microphones bring a whole new meaning to the word flexible
with their fully adjustable gooseneck. Designed for easy replacement and available in
cardioid, supercardioid and omnidirectional polar patterns, the interchangeable cartridges
offer wide frequency response and accurate sound reproduction for a wide variety of applications
such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges
fit every model in the Microflex product line for enhanced convenience and consistent sound.

Microflex Gooseneck microphones are available in four models with a variety of heights and mounting
styles to choose from. One model includes a silent mute switch with LED indicator, a Shure Microflex
exclusive. And every Microflex Gooseneck features high sensitivity and balanced, transformerless output
for maximum resistance to electromagnetic hum and RF interference, even over long cable runs.

Desktop Base with 10 foot Cable, Logic Functions, Programmable Switch and LED Indicator, Snap-Fit Foam Windscreen

Features:

Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to noise over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (M412D/MX418D)
New brighter LED improves visibility under strong ambient lighting M412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers M412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SW/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SW/MX418SE)

Microphone Specifications:
 
Frequency Response
50 to 17,000 Hz
Output Impedance
180 ohms actual (EIA rated at 150 ohms)
Sensitivity (At 1,000 Hz, open circuit voltage*)
Cardioid: -35.0 dBV/Pa (17.8 mV)
Supercardioid: -33.5 dBV/Pa (21.1 mV)
Omnidirectional: -27.5 dBV/Pa (42.2 mV)
All values -12 dB at 0 gain; *1 Pascal = 94 dB SPL
Maximum SPL (1 kHz at 1% THD, 1 k ohm load)
Cardioid: 124.2 dB
Supercardioid: 122.7 dB
Omnidirectional: 116.7 dB
All values +6 dB at 0 gain
Equivalent Output Noise (A-weighted)
Cardioid: 28.0 dB SPL
Supercardioid: 26.5 dB SPL
Omnidirectional: 20.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL)
Cardioid: 66.0 dB
Supercardioid: 67.5 dB
Omnidirectional: 73.5 dB
Dynamic Range at 1 k ohm load
96.2 dB
100 dB at 0 gain
Common Mode Rejection
45.0 dB minimum
Preamplifier Output Clipping Level (1% THD)
-6.0 dBV (0.5 V)
-12 dBV at 0 gain
Polarity
Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements
11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements
Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F)
Relative Humidity: 0 to 95%

Recommended For:

• Brass
• Drums
• Percussions
• Woodwinds

Features:

• Miniature condenser clip-on microphone for wind instruments, drums, and percussions
• Miniature gooseneck for accurate microphone alignment
• Including wireless direct adapter for easy use with AKG pocket transmitters
• Detachable microphone cable
• Transducer shock mount for high mechanical-noise rejection

Standard Accessories:

• A400 adapter
• Microphone bag
• W44 Windscreen

Specs:

• Polar pattern cardioid
• Frequency range 60 Hz to 20 kHz
• Sensitivity 5 mV/Pa (-46 dBV)
• Max. SPL 130/132 dB SPL (for 1 %/3 % THD)
• Equivalent noise level 31 dB(A)
• Signal/noise ratio (A-weighted) 63 dB
• Impedance = 2000 ohms
• Current consumption