LD SYSTEMS WS 100 MH3 Headset microphone, colour of skin, 3 pol Mini-XLR

95.65 incl. GR VAT

Only 2 left in stock

EAN: 4049521043499
Installments calculation
CompareAdd to wishlist Submit Better Price
Light, easy-to-wear, beige-coloured headset condenser microphone with 3-pin mini XLR connector Type: condenser Directional characteristic: cardioid Frequency response: 70–16,000 Hz Nominal impedance: 1.4 kOhm Product type Wireless Microphone System Accessories Type Headsets Colour beige Frequency response 70 – 16.000 Hz Directivity Cardioid Nominal impedance 1400 Ohm(s) Max. SPL 125 dB Phantom power requierements 5 V […]

 

Read more

Light, easy-to-wear, beige-coloured headset condenser microphone with 3-pin mini XLR connector
  • Type: condenser
  • Directional characteristic: cardioid
  • Frequency response: 70–16,000 Hz
  • Nominal impedance: 1.4 kOhm

Product type
Wireless Microphone System Accessories


Type
Headsets


Colour
beige


Frequency response
70 – 16.000 Hz


Directivity
Cardioid


Nominal impedance
1400 Ohm(s)


Max. SPL
125 dB


Phantom power requierements
5 V


Microphone input
Mini-XLR (3-pin, female)


Accessories (included)
Foam windscreen


Weight
0,2 kg

Weight 0.23 kg

Reviews

There are no reviews yet.

Be the first to review “LD SYSTEMS WS 100 MH3 Headset microphone, colour of skin, 3 pol Mini-XLR”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD SYSTEMS WS 100 MH3 Headset microphone, colour of skin, 3 pol Mini-XLR removePROEL HCM 23-SE Microphone Headset with Jack 3.5 removeSHURE WCE6T or B Condenser Omni Headset Microphone removeAKG C 520 Headworn Cardioid Condenser Vocal Microphone removeShure WCM16 Headworn Condenser Microphone removeShure WBH53T Tan Headworn Condenser Microphone remove
NameLD SYSTEMS WS 100 MH3 Headset microphone, colour of skin, 3 pol Mini-XLR removePROEL HCM 23-SE Microphone Headset with Jack 3.5 removeSHURE WCE6T or B Condenser Omni Headset Microphone removeAKG C 520 Headworn Cardioid Condenser Vocal Microphone removeShure WCM16 Headworn Condenser Microphone removeShure WBH53T Tan Headworn Condenser Microphone remove
Image
SKULDWS100MH3H10PR00004WCE6TC 520WCM16WBH53T
Rating
Price 95.65 incl. GR VAT 39.50 incl. GR VAT 511.00 incl. GR VAT 253.00 incl. GR VAT 451.19 incl. GR VAT 363.00 incl. GR VAT
Stock

Only 2 left in stock

Only 3 left in stock (can be backordered)

In stock

Available on backorder

In stock

In stock

AvailabilityOnly 2 left in stockOnly 3 left in stock (can be backordered)In stockAvailable on backorderIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentLight, easy-to-wear, beige-coloured headset condenser microphone with 3-pin mini XLR connector
  • Type: condenser
  • Directional characteristic: cardioid
  • Frequency response: 70–16,000 Hz
  • Nominal impedance: 1.4 kOhm
Product type Wireless Microphone System Accessories
Type Headsets
Colour beige
Frequency response 70 - 16.000 Hz
Directivity Cardioid
Nominal impedance 1400 Ohm(s)
Max. SPL 125 dB
Phantom power requierements 5 V
Microphone input Mini-XLR (3-pin, female)
Accessories (included) Foam windscreen
Weight 0,2 kg
The HCM23 is a ?exible miniature microphone with a simple, fast and comfortable headset system The double vent protection system of the HCM23 makes it ideal for use in theatre and spoken word applications The very small size and the super lightweight provides a comfortable and secure ?t when a discreet, minimum visibility microphone is required Available with 3 different connectors for use with most professional wireless systems currently available Features 5 mm permanently polarized condenser capsule Omni-directional polar pattern Fixed bi-aural headband Anti-pop screen Available Connectors: 3.5mm plug (HCM23SE) 3-pin mini XLR (HCM23AK) 4-pin mini XLR (HCM23) TECHNICAL SHEET Transducer type: Back electret condenser Polar pattern: Omni-directional Frequency response: 20Hz- 20KHz Sensitivity: -45dB± 3dB S/N Ratio: >70dB Nominal Impedance: 1500?± 30% Power Supply: 1.5V-10V Colour: Skin Dimension: Ø5mm Accessories: Windscreen

Transducer     Condenser
Polar Pattern     Omnidirectional
Frequency Response     30Hz to 20kHz +/- 3dB
Dynamic Range (Typical)     Not Specified by Manufacturer
Signal-to-Noise Ratio     Equivalent Acoustic Noise: 29dBA SPL
Maximum Input Sound Level     130dB SPL
Power Requirements     Operating Current: 500uA
Operating Voltage: 1 to 2V
Power Supply Voltage:
+3V with 2.7k ohm Load
+5V with 6.8k ohm Load
+9V with 15k ohm Load
Output Impedance     2k ohms
Output Connectors     TA4-Female Connector for Shure Wireless Transmitters
Dimensions     Not Specified by Manufacturer
Weight     0.07 oz (2g)

Features:

* Head-worn microphone with continuously adjustable behind-the-neck headband
* External shock mount for high mechanical-noise rejection
* Miniature gooseneck for precise positioning near the user's mouth
* Microphone arm provides choice of left or right-hand use

Specifications:

* Polar pattern: cardioid
* Frequency range: 60 Hz to 20 kHz
* Sensitivity: 5 mV/Pa (-46 dBV)
* Max. SPL: 130 dB/132 dB (for THD = 1 %/3 %)
* Equivalent noise level: 31 dB-A
* Signal/noise ratio (A-weighted): 63 dB
* Impedance: = 2000 ohms
* Power requirement: 9 to 52 V phantom power to DIN 45596 or battery powering from B 29 L, or AKG bodypack transmitter
* Connector: C 520: 3-pin male XLR; C 520 L: 3-pin mini XLR
* Cable: C 520: 3 m (10 ft.); C 520 L: 1.5 m (5 ft.)
* Finish: matte black
* Dimensions: length: 195 mm (7.7 in.) (microphone only); max. diameter: 134 mm (5.3 in.)
* Net weight: 26 g (0.9 oz.)
* Shipping weight: C 520: 380 g (13.4 oz.); C 520 L: 260 g (9.2 oz.)

Shure WCM16 Headworn Condenser Microphone

The Shure Model WCM16 headworn electret condenser microphone is intended for wireless use by
performers, lecturers, and others who require the highest quality voice pickup with maximum mobility.
Its wide frequency response, low RF susceptibility and reliable operation at temperature and humidity
extremes make the WCM16 suitable for virtually any vocal application. When used with the Shure bodypack
transmitters, the performance of the WCM16 closely resembles the finest conventional vocal microphones.

 Miniaturized active circuitry included in the cartridge assembly provides equalization that tailors the low-frequency
response to resemble the warmproximity effect of larger vocal microphones. Because of this low-end response, it
is not necessary to position the microphone directly in front of the mouth, thus avoiding much popping and breath
noise, even without the supplied foam pop screen.

 The microphone's hypercardioid unidirectional pickup pattern provides maximum isolation from ambient noise and
from adjacent sound sources such as musical instruments, loudspeakers and other performers. This permits higher
gain-before-feedback without loss or masking of vocals.

Features:

Extra lightweight, adjustable headband stays secure and virtually disappears while being worn
Response comparable to finest conventional vocal microphones
Hypercardioid polar pattern provides maximum isolation from vocalist's own instrument and those of other performers
Uniform polar pattern at all frequencies for maximum gain before feedback
High input clipping level eliminates overload distortion
Cable terminates as 4-pin mini connector
Supplied acoustic foam pop screen
Reliable at temperature and humidity extremes

Specifications:

Frequency Response
50 to 18,000 Hz
Polar Pattern
Hypercardioid, uniform with frequency
Output Impedance
1200 ohms
Output Level (close-talked at 1,000 Hz)
Open Circuit Voltage -55.0 dbV (1.8 mV) at 0.6 m
1 Pascal=94 db SPL
Maximum Sound Pressure Level
150 dB at 1% THD
Dynamic Range
121 dB
Output Noise
29 dB equivalent SPL, A-weighted
Signal-to-Noise Ratio
65 dB at 94 dB SPL
Polarity
Microphone: Positive sound pressure on diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground) of microphone output connector
Receiver-- 1/4" Phone Jack Output: Positive sound pressure on diaphragm produces positive voltage on tip of receiver 1/4" output connector
Receiver-- XLR Output: Positive sound pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 of the XLR output connector
Current Drain
0.35 mA
Recommended Operating Voltage
+5 Vdc (positive on pin 2, negative on pin 1)
Environmental Conditions
Operating Temperatures: -18 to 60 degrees C (0 to 140 degrees F)
Storage Temperatures: -29 to 66 degrees C (-20 to 150 degrees F)
Humidity: 0 to 95%
Cable
1.5m (5 ft), small-diameter, shielded, with 4-pin mini connector
Case Finish (Microphone and Headband)
Matte black enamel
Net Weight
36 g (1.27 oz)

Shure WBH53T Tan Headworn Condenser Microphone

Features of the Shure WBH53 Headworn Microphone:

? Comfortable, latex-free Dynaflex? earforms that hide behind the ears
? Thin, non-reflective wireframe that is easily hidden underneath hair
? Ultra-thin detachable microphone boom mount for right or left positioning
? Interchangeable frequency response caps (mild or high, two pieces each)
? Two foam windscreens included
? Clothing clip for securing cable
? Corrosion resistant
? Easy to clean
? Durable carrying case for protective storage
? Available in either black or tan
? Available with either TA4F connectors or tinned leads (no connector) for full wireless system compatibility

Weight0.23 kg0.10 kg0.40 kg0.38 kg0.04 kg0.10 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.23 kg
Weight 0.10 kg
Weight 0.40 kg
Weight 0.38 kg
Weight 0.04 kg
Weight 0.10 kg