Content | This full-range loudspeaker impresses with its outstanding sound, even at low frequencies. The ICOA 15 A by LD Systems is a genuine all-rounder that offers unparalleled features for its class. Its coaxial design, rotating, BEM-optimised CD horn and extensive and precisely calibrated DynX DSP presets make this powered 15" loudspeaker exceptionally flexible.
The outstanding bass reproduction from the horn-loaded woofer makes the LD ICOA 15 A the ideal choice for musicians, bands, entertainers and dance schools. It also allows DJs to play sets without the need for a subwoofer. Deployed vertically, the speaker impresses as a satellite; horizontally, it's excellent in suspended systems or as a floor monitor. The efficient class-D power amplifier delivers 128 dB max. SPL and 1200 W peak performance.
Drawing on DynX DSP technology by LD Systems, the speaker delivers perfect performance with maximum clarity and power under all conditions. 4 presets, a 3-band EQ and a delay function facilitate optimal adjustment of the sound to the venue conditions. The 2 line/mic input channels with individual gain controllers, plus mono mix output, allow a variety of signal sources to be connected.
Thanks to its shock-resistant front grille and ideal 55° tilt angle, the LD ICOA 15 A is also outstanding as a floor monitor. Placed vertically, the 36 mm dual tilt stand attachment offers the choice of a 0° or 5° tilt angle for optimally adapting the system to the local acoustic environment.
Extensive and smart accessories for installation and transport are optionally available. 4 aluminium handles with an ergonomic rubber surface provide optimal grip when carrying the speaker.
Product type
PA loudspeaker
Low/mid driver dimensions
15 "
Horn
BEM optimized CD Horn
HF driver brand
Custom-made
HF driver voice coil
1.4 "
HF driver voice coil
35 mm
Dispersion (H x V)
90° x 50°
Frequency response
48 - 20000 Hz
Crossover frequency kHz
2 kHz
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Controls
2 x gain, On / off switch, Rotary/push encoder
Mic-/ Line Input Connectors
6.3 mm jack Combination sockets (symmetrical), XLR
Line input connectors
3.5 mm TRS
Line output connectors
XLR
Ambient temperature (in operation)
0 - 40 °C
Operating voltage
100 V - 240 V AC / 50 - 60 Hz
Relative Humidity
< 80 %, not condensing
Cabinet material
Polypropylene
Cabinet construction
Bass Reflex
Mounting
36mm flange (0°, 5°), 6 x M10 flying points
Accessories (included)
Power cord
|
Quasi 3-Way Active Tri-amplified Speaker System.
SPOT2500T is composed of an active full-range cabinet and a passive bass cabinet.
It is a high directivity, long throw compact systems, characterized by extremely high intelligibility, even at long distances, making it the perfect choice for live applications. This system was designed to simplify the task of assembling clusters by simply placing multiple enclosures side-by-side when wider horizontal dispersion is required.
SPOT 2500T is equipped with class D amplifiers controlled by the Montarbo DSP loudspeaker processor (56 bit, 180 MHz, 24 bit converters) which provides filtering, equalization, delay, limiting and diagnostic functions. This DSP utilizes an advanced algorithm for the real time control of both the power output and the temperature (both internal and external) of the amplifier; it also includes a dedicated standby function which results in reduced power consumption when no signal is present.
5 presets are available, one of which may be customized by the user and loaded into the DSP, thus adapting the speaker's acoustic response to the user's personal taste. The Internal DSP controller also provides an auxiliary output that may be used to drive an external subwoofer, be it equipped with internal filters or not. The presets can be modified by means of the Montarbo proprietary software program RAConLS™ with the LD2.4 USB interface (optional device). The remote control allows: programming and storage of one preset in the DSP and the creation of an unlimited library of personalized settings in the PC; adjustment of the frequency response by means of a 10 filter 'fully parametric' equalizer; adjustment of the delay time and of the output level of each speaker system; monitoring of the power amplifier's status (temperature, protection circuits, limiters and thermal alarms); selection of the type of subwoofer used.
- 3 class-D amplifiers (with switching-mode power supplies) that can supply a total of 2500 Watts EIAJ (1000 + 1000 W for the LF drivers, 500 W for the HF).
- 140 dB max SPL.
- Two 15" woofers (one of which in the passive bass module) with 4" voice coil, featuring a shielded front-mounted neodymium magnet.
- HF driver with a 1.4" throat and a 3" voice coil, featuring a neodymium magnet and titanium diaphragm. - High directivity (50° H x 40° V) wave-guide horn.
- Montarbo 56 bit DSP, 180 MHz, 24 bit converters.
- Dedicated standby function.
- Processed auxiliary output allows to drive an external subwoofer.
- 5 presets one of which may be customized and loaded into the DSP.
- Presets remote control and customization by means of the proprietary software program RAConLS™ and the optional LD2.4 USB interface.
- With a single LD2.4 USB interface it is possible to operate up to 10 speaker systems of the SPOT, WIDE and FULL series.
- The geometry of the cabinet allows for easy construction of clusters. A 3-system cluster results in a 150° horizontal coverage.
- Birch plywood cabinet, finished with anti-abrasion paint.
- Threaded studs (M10) for safe and simple suspension; adapter for coupling bar (SM3, optional); 2 ergonomically designed handles.
APPLICATIONS
- Coverage of large areas.
- Stage-monitoring applications (in-fill system).
- In-house system in theatres and in live-performances venues.
|
he das Audio dr speaker range combine the best of lightweight portability with premium quality sound performance and high output capabilities. The Dr 15a is a very portable self-powered system with an extremely efficient 15" woofer that is capable of a seriously impressive and very punchy bass & mid range output. A custom m-34 compression driver handles high frequency reproduction with a clean, smooth and dynamically transparent clarity. Each driver is powered directly by its own perfectly matched independent amplifier in this bi-amplified active system for maximum efficiency and incredible sound pressure levels. A built-in two-channel mixer comprises both microphone and line inputs, allowing for use in any format, with or without additional mixer or audio sources. Manufactured and designed by das, in Spain, the dr are constructed using the latest in, mechanics, magnetics, acoustics and electronics technology to create speakers that are tough, reliable and capable out performing any rival model their class.
TECHNICAL SPECIFICATIONS:
Mobile DJ, disco, PA or install use
200 Watt active speaker
Nominal LF power amplifier 150 Watt (AB)
Nominal HF power amplifier 50 Watt (AB)
127dB SPL
45Hz - 20kHz frequency range (-dB)
2 way
15" woofe speaker
1" compression driver
Female XLR-Jack input
LOOP THRU : Jack
Input Impedance line : 20 kohms; mic : 2 kohms
Polypropylene enclosure
35mm integral pole mount fitting
Black finish
Weight: 23.4kg (including packaging)
Height: 70.0cm x Width: 45.0cm x Depth: 36.0cm
Warranty: 12 months
Power: 240V / 110V Switchable
|
Inside our rigid custom designed cabinet is a 15" driver designed exclusively for this project. It's matched with a new 1.75" Titanium high frequency driver, aimed through a 1" diameter horn. The dB500a features 500 watts of clean power (400 watts low frequency/100 watts high frequency) and has a crossover designed for high SPL. Our exclusive Optimax(TM) signal processing circuitry provides total speaker protection but won't cut the low end at high volumes, as similar speakers with sliding filters do.
The back panel has a built-in mixer-like preamp section with mic and line inputs, XLR connectors and level controls. Controls for the selectable low pass filter and Optimax processing are also included.
The dB500a speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.
|
Features
400 Watt digital bi-amplification
129 dB max spl
Wide dispersion 90 x 60 constant directivity horn
15" High power woofer, 3" voice coil
2" Titanium dome, high frequency driver
DSP processing, boost eq, soft limiter and protection
Xlr/jack input, xlr signal output
Acoustical Specifications
Frequency Response -3 dB: 45 Hz ÷ 20 kHz
Max SPL: 129 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 2" 2.5" voice coil
Woofer: 15" 3" voice coil
Input/Output Section
Input connectors: xlr-jack
Output connectors: xlr
Processor Section
Crossover frequencies: 1300 Hz
Controls: Flat, Boost
Amplifier Specifications
Total power: 400 W
High frequencies: 100 W
Low frequencies: 300 W
Cabinet
Cabinet Material: Composite PP
Handles: 1 on top, 2 on sides
Pole Mount/Cap: yes
Grille: steel
Physical Specifications
Height: 708/27.8 mm/inch
Width: 437/17.2 mm/inch
Depth: 389/15.3 mm/inch
Net Weight: 26/57.32 kg/lbs
|
The new ETX Powered Loudspeakers family builds upon the industry-leading innovation and 85-year heritage of Electro-Voice audio engineering to offer the most advanced professional portable powered loudspeakers available today.
A versatile high-end choice for live entertainment venues, rental companies, pro musicians and DJs, and installed sound, the ETX Powered Loudspeakers family features three two-way models (10-inch, 12-inch and 15-inch, all with a precision HF titanium compression driver), a three-way model (15-inch with a 6.5-inch MF driver and a precision HF titanium compression driver) and two subs (15-inch and 18-inch drivers).
Positioned above the ZLX and Live X families respectively, ETX Powered Loudspeakers complete a trio of recent EV portable loudspeaker offerings-each of which was designed to bring best-in-class performance to its price point.
Inside each low-profile, tour-grade wood enclosure are a host of unique new features that set ETX Powered Loudspeakers apart, combining intelligent technology and innovative industrial design for spectacular results across all applications. EV-engineered high-efficiency transducers and high-powered Class-D amplifiers, Signal Synchronized Transducers (SST) waveguide design and smart FIR-Drive DSP all work together to provide peerless EV sound quality and precise coverage at the highest SPLs.
- 15-inch LF SMX woofer
- 6.5-inch MF driver
- 1.25-inch HF titanium compression driver
- 2000 W Class-D power amplifier with integrated FIR-Drive DSP
- 136 dB peak SPL
Frequency Range | 38 Hz - 20 kHz | Maximum SPL | 136 peak dB | Power Consumption | 100 - 240 V~, 50 - 60 Hz, 1.6 - 0.8 A | Power Rating | 2000 W | Frequency Response | 48 Hz - 20 kHz | Coverage (Nominal -6 dB) H | 60 ° | Coverage (Nominal -6 dB) V | 40 ° | LF Transducer | SMX2151 380 mm (15 in) | MF Transducer | EVS-6C 6.5-in midbass driver | HF Transducer | DH3-B 1.25-in titanium compression driver | Crossover Frequency | 700 Hz, 2900 Hz | Connector Type | (2) XLR/TRS combo jack and (1) XLR link output | Enclosure Material | 18-mm, 13-ply birch plywood with EVCoat | Grill | 16AWG steel with powdercoat | Suspension | (8) M10 suspension points | Height | 1023 mm (40.28“) | Width | 469 mm (18.46“) | Depth | 426 mm (16.77“) | Weight Net | 41.7 kg (91.93 lbs) | Shipping Weight | 46.8 kg (103.18 lbs) |
|
JIM –
Purchased a pair! Very full sounding speaker for a great price. Aesthetically nice as well. Lots of handles to carry anyway you’d like. Solid piece of equipment! My favorite new brand!