Content | LD Systems ICOA 15 A BT W 15" Active Coaxial PA Speaker with Bluetooth white
This full-range loudspeaker impresses with its outstanding sound, even at low frequencies. The ICOA 15 a BT W A by LD Systems is a genuine all-rounder that offers unparalleled features for its class. Its coaxial design, rotating, BEM-optimised CD horn and extensive and precisely calibrated DynX DSP presets make this powered 15" loudspeaker exceptionally flexible.
The outstanding bass reproduction from the horn-loaded woofer makes the LD ICOA 15 A BT W the ideal choice for musicians, bands, entertainers and dance schools. It also allows DJs to play sets without the need for a subwoofer. Deployed vertically, the speaker impresses as a satellite; horizontally, it\'s excellent in suspended systems or as a floor monitor. The efficient class-D power amplifier delivers 128 dB max. SPL and 1200 W peak performance. Especially the version with white housing and white front grille blends discreetly and unobtrusively into almost any environment.
Drawing on DynX DSP technology by LD Systems, the speaker delivers perfect performance with maximum clarity and power under all conditions. 4 presets, a 3-band EQ and a delay function facilitate optimal adjustment of the sound to the venue conditions. The 2 line/mic input channels with individual gain controllers, plus mono mix output, allow a variety of signal sources to be connected.
Thanks to its shock-resistant front grille and ideal 55° tilt angle, the LD ICOA 15 A BT W is also outstanding as a floor monitor. Placed vertically, the 36 mm dual tilt stand attachment offers the choice of a 0° or 5° tilt angle for optimally adapting the system to the local acoustic environment.
Extensive and smart accessories for installation and transport are optionally available. 4 aluminium handles with an ergonomic rubber surface provide optimal grip when carrying the speaker.
Product type
PA loudspeaker
Type
Powered
Color
White (RAL 9003)
Bluetooth Audio Decoder
Bluetooth 4.0
Low/mid driver dimensions
15 "
Woofer size
381 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Horn
BEM optimized CD Horn
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Custom-made
HF driver voice coil
1 "
HF Driver Voice Coil
25.4 mm
Amplifier
Class D
Dispersion (H x V)
90 ° x 50 °
RMS
300 W
Peak power
1200 W
Frequency response
48 - 20000 Hz
Crossover frequency kHz
2 kHz
Max. SPL (peak)
128 dB
Protection circuits
Multiband limiter , over voltage , over-current , thermal overload
Controls
2 x gain , On / off switch , Rotary/push encoder
Indicators
LC display
Mic/ line inputs
2
Mic-/ Line Input Connectors
6.3 mm jack Combination sockets (symmetrical) , XLR
Line inputs
1
Line input connectors
3.5 mm TRS
Line outputs
1
Line output connectors
XLR
Operating voltage
SMPS
Power consumption
150 W
Ambient temperature ( in operation )
0 - 40 °C
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Relative Humidity
< 80 %, not condensing
Fuse
T4AL 250 V
Cabinet material
Polypropylene
Cabinet construction
Bass Reflex
Mounting
36mm flange (0°, 5°) , 6 x M10 flying points
Monitor angle
55 °
Width
416 mm
Height
695 mm
Depth
415 mm
Weight
24,3 kg
Accessories (included)
Power cord |
JBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System
Key Features : Powered bi-amplified full-range loudspeaker with JBL DrivePack? technology for portable or installed use.
2200 Watts peak output power, 1100 Watts continuous.
HiQnet? compatible; network control.
15-inch Differential Drive? low-frequency driver for extended low-frequency output.
60° x 40°coverage.
Stylized and ergonomically designed powder-coated die cast aluminum handles.
Six 3-inch fly track suspension points and fourteen M10 fittings (optional detachable flying fittings and forged eye bolt kits available).
Optional DPCN (CobraNet?) digital audio input module available. Specifications:
Frequency Range |
: |
34 Hz to 20 kHz (-10 dB) |
Frequency Response |
: |
43 Hz to 18 kHz ( ± 3 dB) |
Coverage Pattern |
: |
60°x 40° rotatable waveguide |
Directivity Factor (Q) |
: |
15.85 |
Directivity Index (DI) |
: |
12 dB |
Maximum Peak Output1 |
: |
138 dB SPL 1m |
Transducer Section |
|
|
Low Frequency Section |
: |
JBL 2265G, 381mm (15 in) dia., 76mm (3 in) Dual Coil neodymium Differential Drive?, Direct Cooled |
Bandpass Nominal Impedance |
: |
4 ohms |
Mid/High Frequency Section |
: |
|
Mid Frequency |
: |
JBL CMCD-82H, 200mm (8in) Dual Coil Differential? transducer |
High Frequency |
: |
JBL2452H-SL, 100mm (4in) titanium damped diaphragm, 1.5in. exit |
Waveguide |
: |
JBL PT-K64-MHF |
Bandpass Nominal Impedance |
: |
8 ohms
|
System |
|
|
DP2 Internal Amplification Output (at nominal load) |
: |
2200 Watts Peak, 1100 Watts Continuous |
DP2 Output (Continuous IEC shaped pink noise into rated load impedance) |
: |
750LF/350HF Watts |
DP2 Output Section |
: |
2-Channel, Class I |
Audio Input connector: |
: |
XLR with loop-through |
Network Control Connector |
: |
Ethernet, RJ45 |
Signal Processing |
: |
DSP Based, resident in Input Module |
System Management
|
: |
DSP based limiters for mechanical and thermal protection |
AC Power Operating Range |
: |
Auto Select 90-132VAC/ 216-264VAC, 50/60Hz
|
AC Line Voltage |
: |
50/60 Hz, Auto-Detect; 120V/ 240V (-15%, +10%) |
AC Input Connector |
: |
Neutrik PowerCon |
AC Loop-Thru |
: |
Neutrik PowerCon |
AC Current Requirement |
: |
6A per system at 120V, 3A per system at 240V |
Enclosure |
|
|
Box Construction |
: |
5/8in. multi-ply exterior grade Baltic birch. Internally braced. Black DuraFlex? finish.
|
Suspension System |
: |
6 standard air-cargo 3 in. track and 12 M10 fittings
|
Grille |
: |
14 Gauge Black powder-coated perforated steel with foam backing
|
Dimensions (H x W x D) |
: |
914.4 x 528.3 x 624.8mm (36 x 20.8 x 24.6 in) |
Net Weight |
: |
44 kg (97 lb) | |
Specifications
- LF Amplifier Power (RMS): 1000 watts
- HF Amplifier Power (RMS): 250 watts
- Frequency Response (-3dB): 58-18000 Hz
- Frequency Response (-10dB): 50-20000 Hz
- Max. SPL/1m (calc); half space: 133 dB
- Coverage (nominal -6dB) Horizontal: 90°
- Coverage (nominal -6dB) Vertical: 50°
- LF Transducer: DVX3150
- HF Transducer: ND2
- Crossover Frequency: 1500 Hz
- Enclosure Material: Polypropylene
- Flying: Yes
- Input Connections: XLR
- Chassis Size: 15“
- Speaker Type: Full-range, powered monitors, poweredspeakers, two-way wedges
- Weight (net): 50.49 lbs
- Dimensions (H x W x D): 27.24" x 17.56" x 16.18“
|
Inside our rigid custom designed cabinet is a 15" driver designed exclusively for this project. It's matched with a new 1.75" Titanium high frequency driver, aimed through a 1" diameter horn. The dB500a features 500 watts of clean power (400 watts low frequency/100 watts high frequency) and has a crossover designed for high SPL. Our exclusive Optimax(TM) signal processing circuitry provides total speaker protection but won't cut the low end at high volumes, as similar speakers with sliding filters do.
The back panel has a built-in mixer-like preamp section with mic and line inputs, XLR connectors and level controls. Controls for the selectable low pass filter and Optimax processing are also included.
The dB500a speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.
|
Powerful, Lightweight PA Speakers for Any Application You'll be impressed by how easy it is to fill a room with powerful, pristine sound with Turbosound Milan M15 powered loudspeakers. This 15-inch, 1,100-watt speaker is perfect for live music applications, and just as appropriate for schools, churches, or even corporate A/V installations. The coverage is wide and consistent, and doesn't sound strange when you get out of the main coverage area - some of the major factors Sweetwater considers when we're designing live sound systems. Whether you use it as a PA speaker or a stage monitor you can expect tight and powerful lows, rich and detailed mids, and smooth highs from the Milan M15.
Turbosound Milan M15 Powered PA Speaker at a Glance:
- Composite cabinet makes this powerful speaker strong and lightweight
- Flexible input options for virtually any application
- Designed to serve double-duty as a floor monitor too
Composite cabinet makes this powerful speaker strong and lightweight
You'll notice the Milan M15 is remarkably lightweight for a 15-inch PA speaker, at just over 60 pounds. That's due to the cabinet design, which is made from injection-molded polypropylene. And if you look close you'll see a ribbed pattern on the cabinet's exterior (it's actually on the interior as well). That ribbing not only adds strength and rigidity, it also helps cut down on cabinet resonance. Basically, the Milan M15 lets you take advantage of a lighter, stronger design without compromising your sound quality.
Flexible input options and sound shaping for virtually any application
You can connect practically any sound source to the Milan M15, from your mixer's line outputs to instruments and microphones. And you've got two inputs available, so the Milan M15 is a perfectly viable solution for coffee shop performances with a guitar and vocal mic. It's also perfect for public speaking - in fact, there's a Speech/Music mode switch that optimizes the performance for those applications.
Designed to serve double-duty as a floor monitor too
The powerful sound and lightweight design make the Milan M15 an ideal main PA speaker, it's designed to serve you well as a stage monitor too. The trapezoidal design doesn't just make it easy to handle, it also angles the Milan M15 up at you when you place it on the side. Switch on the 100Hz low-cut filter, and now you've got a sweet-sounding floor monitor that won't add rumble to your stage sound.
Turbosound Milan M15 Powered PA Speaker Features:
- Active PA speaker with 15" LF driver and 1,100W Class-D power amp
- Klark Teknik DSP optimizes your sound with dynamic equalization and intelligent limiting
- Specially-designed waveguide gives you wide, consistent coverage with natural off-axis sound
- Bass and Treble EQ controls let you fine-tune your sound
- Dual-angle pole mount socket makes it easy to position for optimum sound coverage
- Injection-molded polypropylene enclosure is strong and lightweight
- Recessed carry handle makes transport and setup easier
- Front-panel LED indicators indicate if a signal is present, when limiting is occurring, and when signal is clipping
Get the Turbosound Milan M15 for powerful sound in a strong, lightweight design Specification | Detail | Powered | Yes | Power Configuration | Bi-amped | LF Driver Size | 15“ | LF Driver Power Amp | 1,000W (peak) Class-D | HF Driver Size | 1“ | HF Driver Power Amp | 100W (peak) Class-D | Frequency Range | 45Hz-18kHz (±3dB), 40Hz-20kHz (-10dB) | Maximum Peak SPL | 130 dB | Horizontal Coverage Angle | 90 degrees | Vertical Coverage Angle | 60 degrees | Enclosure Material | Polypropylene | Mounting Options | Pole, Floor Wedge, Fly | Inputs | 2 x XLR/TRS combo | Outputs | 1 x XLR | Height | 28.3“ | Width | 18“ | Depth | 14.5“ | Weight | 60.9 lbs. | Manufacturer Part Number | M15UL |
|
Features
400 Watt digital bi-amplification
129 dB max spl
Wide dispersion 90 x 60 constant directivity horn
15" High power woofer, 3" voice coil
2" Titanium dome, high frequency driver
DSP processing, boost eq, soft limiter and protection
Xlr/jack input, xlr signal output
Acoustical Specifications
Frequency Response -3 dB: 45 Hz ÷ 20 kHz
Max SPL: 129 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 2" 2.5" voice coil
Woofer: 15" 3" voice coil
Input/Output Section
Input connectors: xlr-jack
Output connectors: xlr
Processor Section
Crossover frequencies: 1300 Hz
Controls: Flat, Boost
Amplifier Specifications
Total power: 400 W
High frequencies: 100 W
Low frequencies: 300 W
Cabinet
Cabinet Material: Composite PP
Handles: 1 on top, 2 on sides
Pole Mount/Cap: yes
Grille: steel
Physical Specifications
Height: 708/27.8 mm/inch
Width: 437/17.2 mm/inch
Depth: 389/15.3 mm/inch
Net Weight: 26/57.32 kg/lbs
|
Reviews
There are no reviews yet.