| Content | Music starts to really groove when you can feel the bass in your body. The ICOA SUB can deliver as much bass as you want - to get the people rocking and entice them to the dance floor. It can even lend a multimedia presentation that special oomph it needs to reach its audience.
The ICOA SUB pumps out serious bass and gives you greater headroom and a clearer sound. This is because your subwoofer relieves the main speaker, whose woofers are now less burdened by high-energy bass impulses, resulting in less intermodulation distortion. Even at higher volumes, the sound doesn't get muffled. Voices and instruments stay crystal clear.
Thanks to its powerful Class D amplifier with 600-watt RMS or 2400-watt peak output, you have some serious power at your command. The presets of the integrated DynX DSP - which offers crossover frequencies of 80, 100 and 120 Hz - let you finely balance your ICOA SUB perfectly with your system. Signal polarity can also be reversed and the SUB offers a delay line-preset for distances up to 10 meters.
When your needs begin to expand as the venues get bigger, your setup can grow along with you. Simply add more ICOA SUBs, which can be operated in parallel, giving you more and more power. You can also take advantage of the cardioid-preset. Simply position the additional subwoofers next to your ICOA SUB facing to the rear and enable the cardioid-preset to get a quieter and controlled low-end at the back while still keeping the punch at the front.
The rugged housings made of 18 mm laminated wood can be stacked, while the M20 thread on top lets you mount the main speakers using a distance pole. Transport is simplified by mounting rollers to the rear. Corner protectors guard the edges during setup. To keep the ICOA SUB from slipping out of your hands, its four aluminium grips are covered in rubber.
Whether you\'re a DJ, singer-songwriter, rock or party band, the ICOA SUB produces the perfect bass to complement your live music. Lectures and multimedia presentations also benefit from its clarity and powerful presence, giving you the proper support to amplify emotions in your audience.
- 18-inch subwoofer for powerful low-end up to 29 Hz
- 133 dB max. SPL and 2400 Watt peak power through highly efficient digital Class D power amplifier
- Optimized bass reflex ports
- DynX DSP with four application presets (three crossover frequencies, cardioid mode)
- Switchable signal polarity and adjustable delay line for up to 10 meters
- 2 x XLR/TRS "combo jack" inputs and 2 XLR Output
- 18 mm rugged plywood housing and heavy-duty grill
- 4 Aluminum handles with ergonomic rubber surface
- Securely stackable with four stacking-grooves
- M20 thread for distance pole
Product type
PA subwoofer
Type
Powered
Low/mid driver dimensions
18 "
Woofer size
457.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
4 "
Woofer voice coil (mm)
100 mm
Amplifier
Class D
RMS
600 W
Peak power
2400 W
Frequency response (-10dB)
29Hz Preset depending
Max. SPL (peak)
133 dB
Protection circuits
Excursion Limiter , over voltage , over-current , Peak Limiter , thermal overload
Controls
Push encoder
Indicators
LC display
Line inputs
2
Line input connectors
XLR/6.3mm jack combo jacks (balanced)
Line outputs
2
Line output connectors
XLR
Operating voltage
100 - 240 V
Power Consumption (max.)
675 W
Operating Temperature
0 - 40 °C
Relative Humidity
< 60% (non-condensing)
Cabinet material
18 mm Multiplex
Cabinet surface
texture paint
Cabinet construction
Bass Reflex
Width
626 mm
Height
672 mm
Depth
637 mm
Weight
44,3 kg
| Add bass
One of the best ways to fill the room with bass with your PA system is by adding a subwoofer. Mackie's Thump 118S powered subwoofer was designed to boost the low-frequency power and output of a PA system using their Thump Series powered speakers, but it'll work with any system that needs more bass. This sub features a built-in amplifier that sends up to 1400 watts to the 18" low-frequency driver in an efficient bandpass enclosure, creating plenty of bass energy for just about any musical application or venue. Internal protection circuits keep the sub rockin' and safely under control, even when the party gets loud and raucous.
Integrates well
Selectable High Pass Modes with a variable crossover setting optimizes the sub for different system configurations and musical genres. A 2-channel input mixer plus 2 full-range and 2 high-pass outputs offer plenty of wiring and integration options. Convenient, top corner handles help ease the pain when carrying this Built-Like-A-Tank™ sub to and from a gig.
Product highlights:
- powered PA subwoofer
- 18" woofer in a bandpass enclosure
- built-in amplifier: 1400 watts peak
- maximum SPL: 132 dB
- frequency range: 40-120 Hz
- 4 High Pass Modes: Flat, Deep, Punch, Variable (with control)
- phase switch and output level control
Other features:
- inputs: 2 XLR
- outputs: 4 XLR (2 full-range, 2 high-pass)
- Built-Like-A-Tank™ bandpass enclosure with weather-resistant perforated metal grille
- Integrated M20-threaded pole mount
- dimensions: 20.9" W x 21.25" H x 25.9" D
- weight: 65.5 lbs.
- warranty: 1 year
What's in the box:
- Powered 18" PA subwoofer
- 6' AC Power cord (IEC 3-prong)
- Quickstart guide
| -18" woofer (457mm), 8 Ohm
- Continuos power output: 500W RMS
- Frequency response: 30 - 200Hz +/-3dB
- SPL: 128dB continuos, 130dB peak
- XLR or Jack 6.3mm signal input
- XLR link output
- Volume control
- Adjustable frequency
- Phase selector
- Thermal protection, DC protection
- Wooden cabinet 15mm, painted
- Dimensions(W x D x H): 530*600*530mm
- Weight: 33kg |
Features
700 Watt digital amplification
132 dB max spl
18" High power woofer, 4" voice coil
Xover selector, phase switch and high pass outputs
Electronic equalization, soft limiter and protection
Stereo Xlr/Jack combo input, Stereo Xlr signal output
Acoustical Specifications
Frequency Response -3 dB: 40 Hz ÷ Xover point kHz
Max SPL: 132 dB
Woofer: 18“, 4" voice coil
Input/Output Section
Input connectors: Combo stereo Jack-XLR male
Output connectors: Combo stereo XLR female
Processor Section
Crossover frequencies: 80 - 120 Hz
Protections: Limiter
Limiter: Fast limiter, rms limiter
Controls: Volume, phase, crossover switches
Amplifier Specifications
Total power: 1000 W
Cabinet
Cabinet Material: Baltic Birch
Handles: 2 on sides
Pole Mount/Cap: yes
Colour: Black
Physical Specifications
Height: 650/25.5 mm/inch
Width: 504/19.84 mm/inch
Depth: 650/25.5 mm/inch
Net Weight: 40.4/89.06 kg/lbs
|
18” Self-Powered Extended Low-Frequency Subwoofer System with Wi-Fi
The JBL PRX818XLF is a self-powered extended low-frequency subwoofer system. Featuring a JBL 18-inch woofer powered by a 1500-watt class-D amplifier, PRX818XLF delivers incredible output in a lightweight and compact form factor.
The PRX800 series integrates embedded ioSYS technology which enables easier setup and control when used with the HARMAN Connected PA app and compatible products. Connected PA delivers seamless plug-and-play operation with a variety of HARMAN equipment and enables you to control your entire live sound system with one app. Products within the Connected PA system self-identify and retain presets for effortless setup, and setup wizards help you quickly optimize speaker levels, configuration settings and EQ. Current products with embedded ioSYS technology and HARMAN Connected PA compatibility include the Ui24R mixer, JBL PRX800 loudspeakers, dbx Di1 direct boxes, and AKG P5i microphones. Learn more about HARMAN Connected PA.
FEATURES
- Built-in Wi-Fi for wireless control of your system from anywhere in the venue
- Free PRX Connect mobile app for iOS and Android provides wireless control over volume levels, 8-band parametric EQ and up to 50ms of speaker delay to fine-tune your sound
- Class-leading 1500-watt amplifier delivers ample power to fill your venue
- JBL Differential Drive® transducers for higher SPL in a lightweight design
- Next-generation JBL neodymium compression drivers
- Redesigned Crown input technology, including XLR, 1/4” and RCA inputs plus XLR loop-through
- Intelligent variable-speed fan activates only when needed to reduce noise
- Updated tuning delivers flat frequency response and smooth off-axis behavior
- Durable wooden cabinets, tour-proven DuraFlex™ finish and dent-resistant 16-gauge grilles
- Universal power supply for worldwide compatibility
- dbx Type IV™ limiting ensures clear, accurate sound at high volumes
- Brutal testing regimen—including the famous JBL 100-hour power test—ensures reliable performance
APPLICATIONS
^
- The PRX815XLF extended low frequency subwoofer was designed and engineered to provide sub bass frequencies with accuracy and power. Used as a single sub in a sub/ sat system or in multiples as part of a scalable, large format sound reinforcement system, the PRX815XLF performs with exceptional efficiency and control. The subs are stackable and light-weight, ensuring quick set-ups and tear-downs. Due to their rugged construction, they are perfect for AV rental inventories. With the integrated stereo pass-thru this is the most powerful low-frequency complement to the PRX full-range systems. The addition of a polarity reverse option further enables system optimization. PRX800 subwoofers feature a standard M20 threaded pole cup that can accept most modern subwoofer-mounted speaker poles.
- The PRX818XLF is a high performance self-powered subwoofer system with remote Wi-Fi control of onboard DSP EQ parameters. The PRX818XLF is comprised of a powerful 2278G Differential Drive® dual voice-coil and magnetic gap, woofer driven by a 1500 Watt Class-D power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable cross-over functionality, polarity optimization, protection, dynamic limiting and discrete component optimization.
- All PRX800 cabinets are built from 18 mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX800 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each
- The amplifier input panel offers stereo inputs with XLR or ¼ inch jack compatibility. A user selectable crossover ensures a smooth transition to full-range system connected to the stereo outputs. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob.
SPECIFICATIONS
^
|
System Type |
Self Powered 18” subwoofer |
|
Maximum SPL Output |
134 dB peak |
|
Frequency Range (-10 dB) |
30 Hz - 103 Hz |
|
Frequency Response (±3 dB) |
35 Hz – 87 Hz |
|
Input Connectors |
Two Balanced female XLR/ 1/4” combo connectors |
|
Input Impedance |
20K Ohms (balanced) |
|
Signal Indicators |
Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting
Signal: Green LED indicates signal present
Power: Blue indicates system has power and ready |
|
Dynamic Control (Input) |
dbx Type IV™ limiter circuit |
|
System Low Pass |
80 Hz |
|
Loop out Crossover Frequency |
80Hz Digital 24db/octave Linkwitz-Riley Filter |
|
Design |
Highly efficient Class-D amplifier |
|
Power Rating |
1500W |
|
AC Power Input |
100V - 240V ~ 50/60 Hz |
|
LF Driver |
1 x JBL 2278G 460 mm (18 in) woofer |
|
Enclosure |
Rectangular, 18 mm, birch-poplar mix |
|
Transport |
2 x injection molded handles with backing cup |
|
Finish |
Obsidian DuraFlex™ finish |
|
Grille |
Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing. |
|
Dimensions (H x W x D) |
692 mm x 523 mm x 724 mm
(27.26 in x 20.6 in x 28.5 in) |
|
Net Weight |
36.28 kg (80.0 lb) |
|
Gross Weight |
45.0 kg (100.0 lb) |
| User's Manual
Data sheet
The LD Systems DDQ Sub 18 is a powerful active subwoofer with digital signal processing for demanding PA applications. It is precisely adapted for combination with the full-range speakers of the DDQ Series and is equally suitable for use with tops made by other manufacturers.
The compact bass-reflex design is loaded with an 18" FaitalPRO bass speaker that has a 4" voice coil and a neodymium magnet driven by two 700-watt Hypex Class D power amplifier modules with a highly efficient switching power supply with a total output of 1400 watts RMS. The DDQ Sub 18 attains a maximum sound-level pressure of 134 dB with a frequency response curve of 30 -120 Hz.
The Sharc DSP programmed especially for the DDQ subwoofers ensures distortion-free and reliable operation even at maximum volume levels with a 1ms look ahead limiter, frequency and phase correction, as well as all protection circuits, and has a large dynamic range of 127dB/113 dB (ADC/DAC). Seven DSP Presets permit selectable crossover frequencies between 80 and 120Hz. Eight additional presets make it possible to realize cardioid configurations of 2 or 3 subwoofers, whereby it is possible to attain rear attenuation of up to 20dB. In addition to XLR inputs and outputs, the DDQ Sub 18 has a separate mono output with a 100Hz high-pass filter. Additional features are LED function indicators and a ground lift switch; the volume and preset controls can be deactivated to prevent inadvertent adjustment.
The cabinet of the DDQ Sub 18 is made of 18mm thick multiplex with an extremely durable polyurethane finish. It is equipped with two M20 threaded flanges and ergonomic handles and is prepared for mounting of casters.
- Type: active
- Version: DSP-controlled
- Woofer size: 18“
- Woofer size: 457.2 mm
- Woofer magnet: neodymium
- Woofer brand: Faital Pro
- Woofer voice coil: 4 "
- Woofer voice coil: 76.5 mm
- Amplifier: Class D
- Power output (RMS): 2 x 700 W
- Frequency response: 30 Hz - 120 Hz
- Max. SPL (continuous): 126 dB
- Max. SPL (peak): 134 dB
- Protection: DSP-based "look ahead" limiter, RMS speaker limiter, RMS power supply limiter, short circuit, overvoltage
- Controls: Gain dB, DSP Preset, Ground Lift, DSP/Gain enable, Power
- Indicators: DSP/ Gain disable, Peak Limit, Signal, Operate
- Line inputs: 2
- Line input connectors: XLR
- Line outputs: 3 (2x Input Link, 1x Sat Out with 100Hz high-pass)
- Line output connectors: XLR
- Power supply: switching power supply
- Operating voltage: 180-264V ~ / 47-63 Hz
- Cabinet material: 18 mm plywood
- Cabinet surface: polyurethane
- Cabinet type: bass reflex
- Width: 510 mm
- Height: 700 mm
- Depth: 725 mm
- Features: 15 x DSP presets with 4 selectable cardioid setups and 7 selectable crossover frequencies (80-120Hz), 2 x threaded flange (M20), 3 x corner handles, prepared for mounting of casters
|
Reviews
There are no reviews yet.