| Content | LD Systems ICOA SUB 15 A Powered 15" Bass Reflex PA Subwoofer
Music starts to really groove when you can feel the bass in your body. The ICOA SUB can deliver as much bass as you want - to get the people rocking and entice them to the dance floor. It can even lend a multimedia presentation that special oomph it needs to reach its audience.
The ICOA SUB pumps out serious bass and gives you greater headroom and a clearer sound. This is because your subwoofer relieves the main speaker, whose woofers are now less burdened by high-energy bass impulses, resulting in less intermodulation distortion. Even at higher volumes, the sound doesn't get muffled. Voices and instruments stay crystal clear.
Thanks to its powerful Class D amplifier with 400-watt RMS or 1600-watt peak output, you have some serious power at your command. The presets of the integrated DynX DSP - which offers crossover frequencies of 80, 100 and 120 Hz - let you finely balance your ICOA SUB perfectly with your system. Signal polarity can also be reversed and the SUB offers a delay line-preset for distances up to 10 meters.
When your needs begin to expand as the venues get bigger, your setup can grow along with you. Simply add more ICOA SUBs, which can be operated in parallel, giving you more and more power. You can also take advantage of the cardioid-preset. Simply position the additional subwoofers next to your ICOA SUB facing to the rear and enable the cardioid-preset to get a quieter and controlled low-end at the back while still keeping the punch at the front.
The rugged housings made of 18 mm laminated wood can be stacked, while the M20 thread on top lets you mount the main speakers using a distance pole. Transport is simplified by mounting rollers to the rear. Corner protectors guard the edges during setup. To keep the ICOA SUB from slipping out of your hands, its four aluminium grips are covered in rubber.
Whether you're a DJ, singer-songwriter, rock or party band, the ICOA SUB produces the perfect bass to complement your live music. Lectures and multimedia presentations also benefit from its clarity and powerful presence, giving you the proper support to amplify emotions in your audience.
Product type
PA subwoofer
Low/mid Woofer dimensions
15 "
Woofer dimensions (mm)
381 mm
Woofer voice coil (mm)
76.5 mm
Frequency response (-10dB)
36Hz Preset depending
Protection circuits
Excursion Limiter, over voltage, over-current, Peak Limiter, RMS Limiter, thermal overload
Line input connectors
XLR/6.3mm jack combo jacks (balanced)
Line output connectors
XLR
Operating voltage
100 - 240 V
Power consumption (max.)
675 W
Operating Temperature
0 - 40 °C
Relative Humidity
< 60% (non-condensing)
Cabinet material
18 mm Multiplex
Cabinet surface
texture paint
Cabinet construction
Bass Reflex
|
The NX S25-A is a vented, high output, active subwoofer system where the solid sound of a dual 15” woofer is desired.
This subwoofer is optimally designed for portable or install applications and it is engineered to complement full-range loudspeakers in a wide range of PA applications.
| Features |
|---|
| 1000 Watt Digipro digital amplifier | | 136 dB max spl | | 2x15" woofer, high power 3" voice coil | |
PFC power factor correction
| Acoustical Specifications |
|---|
| Frequency Response -3 dB: | 40 Hz | ÷ 120 kHz | | Max SPL: | 136 dB | | | Woofer: | 2 x 15“, 3" v.c. | |
| INPUT/OUTPUT SECTION |
|---|
| Input signal: | bal / unbal | | | Input connectors: | Stereo combo xlr-jak | | | Output connectors: | Stereo xlr | | | Input sensitivity: | -2 dBu / +4 dBu | |
| PROCESSOR SECTION |
|---|
| Crossover frequencies: | 80 / 110 Hz | | | Protections: | Thermal, rms | | | Limiter: | Soft peak limiter | | | Controls: | Volume, xover / link, frq. cut, phase | |
| AMPLIFIER SPECIFICATIONS |
|---|
| Total power: | 1000 Watts | | | Low frequencies: | 1000 Watts | | | Cooling: | Convection / forced | | | Connections: | Powercon in / out | |
| CABINET |
|---|
| Cabinet Material: | Balitc birch | | | Hardware: | Stacking fittings | | | Handles: | 4 side | | | Pole Mount/Cap: | Yes | | | Colour: | Black | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 750 / 29.52 mm/inch | | | Width: | 660 / 25.98 mm/inch | | | Depth: | 700 / 27.55 mm/inch | | | Net Weight: | 60.5 / 133.37 Kg/Lbs |
|
| Looking for a portable and versatile active speaker for live sound applications? Then look no further than the Mackie Thump215XT 15" Powered PA Loudspeaker System with DSP and Bluetooth, a powerful PA speaker that includes a 2-channel mixer, great for small club/band PA systems, singer/songwriters, boardrooms, A/V presentations, classrooms, or as a personal monitor for practice or performance. The system features four application-specific voicing modes, an outdoor mode, and Bluetooth for streaming, speaker link, and wireless control.
The Thump215XT's mixer features two combo XLR-1/4" mic/line channels with dedicated gain controls, while an XLR output is provided for daisy-chaining additional speakers. A 3.5mm TRS aux input is also available on channel 2 for connecting your favorite portable player. The tough, impact-resistant polypropylene enclosure ensure protection from on-the-road wear and tear. The bottom of the cabinet provides a pole cup for mounting on a speaker pole or stand. Additionally, M10 fly points are included for permanent installation. The angled design allows the speaker to be used as a floor monitor for onstage performance monitoring.
- 1400W ultraefficient Class-D amplifier
- Built-Like-A-Tank to conquer every gig while lightweight for easy loading
- Frequency response: 40 Hz to 20 kHz
- Max SPL: 129 dB
- 15” high-performance woofer
- 1” compression driver
- Outdoor mode optimizes voicing for open air venues
- Built-in Feedback Eliminator reduces squeals and out of control rumble
- Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives signal
- Front LED On/Off switch
- Standard pole mount
- M10 flypoints for permanent install
- Monitor wedge provides optimal angle for use as a floor monitor
- Universal power supply
Under the hood of ThumpXT is some powerful processing that you can tap into to up your sound quality game. With 4 different application-specific voicing modes, you can instantly optimize your speakers for how you use them at the push of a single button.
- Music: Made to enhance pre-recorded music
- Live: Great for general sound reinforcement
- Club: Provides a low-end punch
- Monitor: Optimizes the speaker for use as a floor wedge keeping feedback in check
Ever bring your speakers from inside a room to the scary outdoors and wonder why it sounds so different? You're not alone, and lucky for you we've thought of everything. When you set up your system out in the wild, just push the Outdoor Mode button and your lovely, full sound is restored.
Easily stream music directly to the speaker and enjoy the wireless freedom to dance around while playing DJ. And while you’re at it, you can dive into the Thump Connect 2 App and adjust anything from system EQ and Voicing Modes to channel levels and venue-specific presets.
- Bluetooth connectivity for streaming, speaker linking, and control
- Download the Thump Connect 2 app for complete wireless control
- Link 2 ThumpXT loudspeakers for a powerful, wireless, music playback system in both stereo and dual-zone configuration
- Channel 1 features a combo XLR-1/4" input that accepts mic or line signals
- Channel 2 features a combo XLR-1/4" line input plus stereo 3.5mm input
- Thru output contains audio from both input channels
These are the loudest, most powerful, and best sounding Thump loudspeakers ever, and they are ready to take on your most demanding gigs. Completely redesigned from the ground up, Thump has beefier drivers, 1400W Class-D amplifiers, and powerful tools to make your next gig easier than ever.
You've got music playing nice and loud, but it's time for another announcement. Sure, you could mess with your levels every time, but who's got time for that. Simply press the Music Ducking button, and channel 2 will automatically turn down whenever you speak into the mic on channel 1.
Ever get a little too up close and personal with the microphone only to hear a loud, ear-destroying squeal? That's commonly known as feedback. And it's an unfortunate issue that physics won't change its mind on. But wait! Hit the Feedback Eliminator button and laugh in the face of those silly acoustic laws.
|
The dB1500a is a self-powered subwoofer featuring a heavy-duty 15" low frequency driver with butyl surround, complemented by a 1000 Watt power amplifier. The dB1500a provides an active stereo crossover with high-passed output for running your satellite speakers. Constructed of solid 3/4 inch plywood, with steel corners, tough carpet covering and large casters. The sub-woofer features large metal grab handles and a 35mm pole mount receptacle. In fixed installation systems, the dB1500a provides super tight low frequency output in a relatively small, unobtrusive enclosure. Perfect for any sound reinforcement system where low-end is desired.
Heavy-duty, 15-inch Low Frequency Transducer
Built-in Amplifier Delivers 1000 watts of Program Power
Variable Stereo Crossover with Balanced High Pass Outputs for Satellite Speakers
Heavy-Duty, Rear Mounted Casters
Extra Large Grab handles and 35mm Pole mount receptacle
3/4" Internally braced, plywood construction
Covered in tough carpet, with steel corners
| The JBL PRX815XLFW is a self-powered extended low-frequency subwoofer system. Featuring a JBL 15-inch woofer powered by a 1500-watt class-D amplifier, PRX815XLFW delivers incredible output in a lightweight and compact form factor. | Professional 500-Watt powered subwoofer for PA applications. Powerful 15'' long-excursion transducer with high temperature voice coil provides incredibly accurate and pulse-pounding bass. Precise reproduction of ultra-low frequencies for "bulletproof" punch and impact. State-of-the-art 500-Watt Class-D amplifier with comprehensive over-excursion, thermal and clip limit protection. Built-in active stereo crossover provides high-pass filtered outputs for full-range loudspeakers. Tunable and switchable Bass Boost plus Phase switch for ultimate low-frequency performance. Variable High Cut control for perfect sound alignment. Subwoofer Level control to adjust the balance between subwoofer and the full-range speakers. Power, Signal and Clip LEDs for perfect monitoring. Intelligent limiter for maximum sound performance and woofer protection. Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption. Pole socket for mounting with commercial spacer poles. Ergonomically shaped handles for easy transport. Rugged steel grill for optimal speaker protection. Weight 33 Kgr. |
Reviews
There are no reviews yet.