LD Systems LDDP4950 DEEP² Power Amplifier 4 x 810W 4 Ohm

803.51 incl. GR VAT

Only 5 left in stock (can be backordered)

EAN: 4049521087288
Installments calculation
CompareAdd to wishlist Submit Better Price
The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why […]

 

Read more

The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products.

The DEEP2 series features a Clip Limiter as well as every common protection circuit. On the rear panel you will find all the common In- and Outputs.

The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design.

The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio.

Product type
Power Amplifiers

Type
PA Power Amplifiers

Rated ouput power (1kHz @ 4 Ohms)
4 x 810 W

Rated ouput power (1kHz @ 8 Ohms)
4 x 490 W

Rated ouput power (1kHz @ 8 Ohms, bridged)
2 x 1600 W

Output circuitry
Class H

Frequency response
20 – 20000 Hz

Total Harmonic Distortion (THD)
< 0.1 %

Signal-to-noise ratio
105 dB

Damping factor
> 400

Crosstalk
>70 dB

Gain
38 dB

Input sensitivity
0.775 V

Protection circuits
DC protection , short circuit , thermal overload

Controls
4 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)

Indicators
Limit , Power , Protect (protection circuit engaged) , Signal

Loudspeaker outputs
4

Speaker output connections
Speakon compatible

Cooling
highly efficient, automatic

Operating voltage
transformer

Operating voltage
230 V AC / 50-60 Hz

Weight
19,6 kg

 

Weight 19.60 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems LDDP4950 DEEP² Power Amplifier 4 x 810W 4 Ohm”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems LDDP4950 DEEP² Power Amplifier 4 x 810W 4 Ohm removeELECTRO VOICE CPS4.5 Contractor Precision Series 4-ch. Amplifier removeYAMAHA XM-4080 Power Amplifier 4x80W removeINTER-M SP-100 SYSTEM DIGITAL AMPLIFIER 60W 6 Channel removeYAMAHA XM-4180 Power Amplifier 4x180W removeRAM AUDIO T-1208 Power Amplifier 8x150 Watts remove
NameLD Systems LDDP4950 DEEP² Power Amplifier 4 x 810W 4 Ohm removeELECTRO VOICE CPS4.5 Contractor Precision Series 4-ch. Amplifier removeYAMAHA XM-4080 Power Amplifier 4x80W removeINTER-M SP-100 SYSTEM DIGITAL AMPLIFIER 60W 6 Channel removeYAMAHA XM-4180 Power Amplifier 4x180W removeRAM AUDIO T-1208 Power Amplifier 8x150 Watts remove
Imageinter-m sp-100 digital amplifier 6ch 60w
SKULDDP4950004383H060.00045SP-100H060.00038T-1208
Rating
Price 803.51 incl. GR VAT2,294.00 incl. GR VAT 957.73 incl. GR VAT 573.29 incl. GR VAT 1,725.00 incl. GR VAT 1,044.57 incl. GR VAT
Stock

Only 5 left in stock (can be backordered)

Available on backorder

Only 5 left in stock

In stock

Available on backorder

Available on backorder

AvailabilityOnly 5 left in stock (can be backordered)Available on backorderOnly 5 left in stockIn stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products. The DEEP2 series features a Clip Limiter as well as every common protection circuit. On the rear panel you will find all the common In- and Outputs. The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design. The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio.
Product type
Power Amplifiers

Type
PA Power Amplifiers

Rated ouput power (1kHz @ 4 Ohms)
4 x 810 W

Rated ouput power (1kHz @ 8 Ohms)
4 x 490 W

Rated ouput power (1kHz @ 8 Ohms, bridged)
2 x 1600 W

Output circuitry
Class H

Frequency response
20 - 20000 Hz

Total Harmonic Distortion (THD)
< 0.1 %

Signal-to-noise ratio
105 dB

Damping factor
> 400

Crosstalk
>70 dB

Gain
38 dB

Input sensitivity
0.775 V

Protection circuits
DC protection , short circuit , thermal overload

Controls
4 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)

Indicators
Limit , Power , Protect (protection circuit engaged) , Signal

Loudspeaker outputs
4

Speaker output connections
Speakon compatible

Cooling
highly efficient, automatic

Operating voltage
transformer

Operating voltage
230 V AC / 50-60 Hz

Weight
19,6 kg
 

mplifier Gain 32 dB (Lo-Z), 33 dB (70V), 36 dB (100V)
Analog Inputs 4, electronically balanced, Phoenix-type
Audio Network No
CAN Bus Interface Yes (With Optional RCM-810 Card)
Continuous Rated Power
(1 kHz, THD 1%) 100v 500 Watts
Continuous Rated Power
(1 kHz, THD 1%) 2Ω 500 Watts
Continuous Rated Power
(1 kHz, THD 1%) 4Ω 500 Watts
Continuous Rated Power
(1 kHz, THD 1%) 70v 500 Watts
Continuous Rated Power
(1 kHz, THD 1%) 8Ω 250 Watts
Continuous Rated Power
(20-20 kHz, THD Continuous Rated Power
(20-20 kHz, THD Continuous Rated Power
(20-20 kHz, THD Continuous Rated Power
(20-20 kHz, THD Cooling Front-to-Rear, continuously variable fans
DIM 30 0.02 %
Electronics Type Amplifier
Frequency Response 15 Hz-30 kHz
Input Impedance (Balanced) 20 kΩ
Input Sensitivity 0 dBu (.775V)-2 Ω, +3 dBu (1.1V)-4/8 Ω, +6 dBu (1.55) 70V/100V
Intermodulation Distortion (SMPTE) 0.05 %
Mains Voltage 220 - 240 V, 50 - 60 Hz or 120 V, 50 - 60 Hz, 50 - 60 Hz
Maximum Bridged Output 4Ω 1000 Watts
Maximum Bridged Output 8Ω 1000 Watts
Network Control (IRIS-Net) Optional
Slew Rate 28 V/µs
Total Harmonic Distortion 0.05 %
Variable Load Drive (VLD) Yes
Height 2RU 88.1 mm (3.47“)
Width 481 mm (18.94“)
Depth 421.5 mm (16.59“)
Weight Net 11.1 kg (24.47 lbs)

aposirsi_electrovoice

- 6CH 60W DIGITAL AMPLIFIER - LIGHT WEIGHT - 6 BUS BROADCASTING FUNCTION WITH A UTP (CATEGORY 5) CABLE. - VOLUME AND 5 BAND EQ TUNING FUNCTION BY CHANNEL - AMP ID AUTO/MANUAL ALLOCATION FUNCTION - SELF-BROADCASTING FUNCTION USING A LOCAL INPUT - INTERFACE FUNCTION WITH OTHER EQUIPMENT USING A CONTROL INPUT/OUTPUT CONTACT
  • Manufacturer: INTER-M
  • Category: AMPLIFIERS
  • Use: POWER AMPLIFIERS 100V
  • Measurement Unit: Attribute34381
  • Warranty Months: 12
  • Depth (cm): 38.0
  • AC Line Voltage and Frequency Configurations Available: 220-240VAC DC24V
  • Height (cm): 8.8
  • Weight (Kg): 13.0
  • Order Quantity: 1
  • Power Output: 60
  • Rack Installation Possible: Yes
  • Channels: 6
  • Power Output W/4Ω: 60
  • Frequency Response (at 1W, 4/8Ω) (dB) ±: 80Hz-20KHz
  • Catalog: Professional
  • Amplifier Type: Power Amplifier
  • Load Impedance: Ohm
  • Group: Attribute49042, Attribute50583
  • Width (cm): 48.2

The XM series multi-channel power amplifiers are ideal for theater, hall, and conference room installations. The lineup includes 80W × 4 and 180W × 4 models, meeting the needs of a wide variety of installed systems. The XM amplifiers are a compact 2U size and surprisingly lightweight, making them easy to handle and install. Switching power supplies deliver high output power while minimizing the unit's physical size. The XM series has monitor/remote jacks that allow external devices to be connected for status monitoring or control from a remote location.

Dimensions (W x H x D): 480 x 88 x 412 mm, Weight: 10 kg

  • Four high-power channels.
  • Switchable stereo, parallel, or bridged operation.
  • Versatile connectivity and high-pass filters for a variety of applications.
  • Distribution drive capability for parallel multi-speakers systems (XM4180).
  • Monitor/Remote connector for remote monitoring and control.
  • • Eight and four channel models with 300W and 150W per channel • Minimal footprint and mass arround 200mm depth and 6 Kg • Optional Add-on card to interface with third party alarm systems with GPIO connections • FCM™ Faulty Channel Management system to avoid entire device shutdown • State-of-the-art layout for maximum performance and reliability • Highly oversized thermal dissipation design for maximum reliability • Superb distortion and noise figures • All channels bridgeable by pairs • Selectable gain in four channel groups (26, 32 and 38dB) • Subsonic filter per channel (35Hz user selectable) • Temperature and signal dependant, intelligent cooling system for minimal noise • Optimal heat extraction due to the air tunneled enclosure and insulator-less power device attachment to the heatsink • Direct connector-less output for maximum quality loudspeaker control • High grade engineering inside with the latest SMD technology • Balanced Inputs with 0.1% tolerance resistors for a precise noise rejection • Critical electronic and mechanical parts selection • Innovative protection systems, FCM™ Faulty Channel Management and SSP™ SOA Sentry Protection • Detented and optionally tamper-proof volume potentiometers • Hi efficiency, two steps Class H Audio topology • Protection, Signal and Clip indicators per channel • Power On and Standby general indicators • Extremely compact, fully featured QuantaPulse Power supply • Low current consumption and heat generation allowing less demanding conditions for multiple amplifier installations • Factory preset worldwide mains voltage power supply • Laser cut four milimeters aluminium front panel • Rugged 2U steel chasis   Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz Phase Response (@1W 20Hz-20kHz): ±15deg Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >70dB Voltage Gain (selectable): 26/32/38 dB Sensitivity: T604:1.5/0.8/0.4V - T1204:2.1/1.0/0.5V - T1208:1.4/0.7/0.4V - T2408:2.0/1.0/0.5V Signal to noise ratio: T604:107dB - T1204:110dB - T1208:107dB - T2408:110dB Required AC Mains (@8ohms 1/8 rated power): T604:1A - T1204:1.5A - T1208:1.4A - T2408:2.6A Dimensions (WxHxD): 483x88.9x210 mm - 19x3.5x8.27 inches Weight (Net): T604/T1204: 5.4Kg - 11.8Lbs T1208/T2408: 6.2Kg-13.5Lbs Protections: Soft-start, Turn-on Turn-off muting, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, SSP™ and FCM™
    OUTPUT POWER T-604 T-1204 T-1208 T-2408
    RMS, 1kHz, 1.0% THD+N
    4 ohms 4x 160 W 4x 320 W 8x 150 W 8x 300 W
    8 ohms 4x 115 W 4x 220 W 8x 100 W 8x 195 W
    Bridge @ 8ohms 2x 320 W 2x 640 W 4x 300 W 4x 600 W
    Pink Noise 12dB CF
    4 ohms 4x 210 W 4x 415 W 8x 180 W 8x 370 W
     
    Weight19.60 kg11.10 kg10.00 kg13.00 kg10.00 kg6.20 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 19.60 kg
    Weight 11.10 kg
    Weight 10.00 kg
    Weight 13.00 kg
    Weight 10.00 kg
    Weight 6.20 kg