Content |
- 2-way passive 8” bass reflex PA speaker
- 400 watts RMS power handling
- 125 dB maximum SPL
- 12" custom woofer and BMS compression driver
- BEM optimized HF waveguide for uniform coverage
- Birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
- Shock-resistant front grill provides maximum speaker protection
- 36 mm Dual-Tilt pole receptacle for 0° or 5° mounting angles
- Large selection of smart installation and transport accessories
STINGER 12 G3
Engineered for rock-solid reliability day in, day out this passive 2-way loudspeaker is a truly professional performer. With its multi-purpose bass reflex construction it is equally suitable for fullrange, satellite or floor monitor use in live PA systems and permanent installations. The Stinger® 12 G3 boasts a mighty 400 watts RMS power handling and 125 dB maximum sound pressure. It is loaded with a custom designed 12” woofer and BMS compression driver delivering extended low frequency response and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern. The Stinger® 12 G3 is designed to be a real workhorse throughout. The enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 12 G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type PA loudspeaker
Type passive
Low/mid driver dimensions 12 "
Woofer Size 304.8 mm
Woofer magnet Ferrite
Woofer brand Custom-made
Woofer voice coil 2.5 "
Woofer voice coil (mm) 63.5 mm
Horn CD horn
HF driver dimensions 1 "
HF Driver Size 25.4 mm
HF driver magnet Ferrite
HF driver brand BMS
HF driver voice coil 1 "
HF Driver Voice Coil 25.4 mm
Dispersion (H x V) 90 ° x 50 °
Load rating (RMS) 400 W
Peak power 800 W
Frequency response 58 - 20000 Hz
SPL (1W/1m) 99 dB
Max. SPL 125 dB
Impedance 8 Ohm(s)
Protection circuits HF Driver
Loudspeaker inputs 1
Speaker input connections Speakon compatible
Loudspeaker outputs 1
Speaker output connections Speakon compatible
Cabinet material 15 mm Plywood
Cabinet surface Polyurea
Cabinet construction vented
Monitor angle 54 °
Width 390 mm
Height 627 mm
Depth 377 mm
Weight 17,7 kg |
The C5212 W is a full range extremely versatile wide-dispersion two-way loudspeaker system for medium throw applications.
The high-frequency section is a constant directivity horn loaded to a 1.4” Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion.
The low-frequency transducer is a 12” woofer with a 3” voice coil.
The crossover is easily bypassed for bi-amp via a recessed changeover switch.
Features |
---|
60° x 40° CMD (Constant Matching Design) constant directivity horn | 1.4" neodymium compression driver with 2.5" diaphragm assembly | 12" woofer with 3" voice coil | Dual-function design: built in passive crossover or external bi-amp | Rotatable Horn System for horizontal cabinet mounting applications | HF driver AMCDP (Active Mosfet Compression Driver Protection) |
LICC (Low Impedance Compensated Crossover) network
Acoustical Specifications |
---|
Frequency Response -10 dB: | 54 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 65 Hz | ÷ 20 kHz | Max SPL @ 1m: | 132 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 40° | | Directivity index; Q: | 10 | | System Sensitivity: | 99 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 500 Watt | | Peak Power Handling: | 200 Watt | | Recommended Amplifier: | 1000 | | Protections: | Dynamic | | Crossover frequencies: | 1200 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 2“HF driver, 2.5" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 100 Watt AES | | Sensitivity: | 111 dB | | Woofer: | 12" woofer, 3" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 400 Watts AES | | Sensitivity: | 98 dB | |
INPUT SECTION |
---|
Input connector: | Speakon NL4 - Full range or Bi-Amp | | Output connector: | Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Hardware: | 9 x M10 inserts | | Handles: | 2 on side | | Pole Mount/Cap: | Yes | | Grille: | Custom perforated steel grille | | Colour: | Black, white, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 600 / 23.62 mm/inch | | Width: | 364 / 14.33 mm/inch | | Depth: | 385 / 15.16 mm/inch | | Net Weight: | 23 / 50.7 Kg/Lbs |
|
|
Features
* DVX3121 12" LF Transducer with forced air cooling * ND2 2" Voice Coil, 1" Exit Neodymium CompressionDriver * 60° x 60° Coverage Pattern * 600W Continuous (2400W peak) power handling * High sensitivity, 131 dB maximum SPL * Adjustable monitor angle (45° or 55°) * 2 Anchor plates for single stud fittings and 7integral suspension points * Available in black or white * Passive/biamp selectable * Full line of accessories
Specifications
* Frequency Response (-3dB): 58Hz-15kHz * Frequency Range (-10dB): 48Hz-20kHz * Rec. Hipass Frequency: 50Hz * Axial Sensitivity: 97dB (1W/1m) * Max. Calculated SPL: 131 dB * Horizontal Coverage: 60° * Vertical Coverage: 60° * Power Handling (Passive): 600W continuous, 1200Wprogram, 2400W peak * LF Power Handling (Biamp): 500W continuous, 1000Wprogram, 2000W peak * HF Power Handling (Biamp): 40W continuous, 80Wprogram, 160W peak * LF Transducer: DVX3121, 12" driver * HF Transducer: ND2, 1" exit Neodymium compressiondriver * Crossover Frequency: 2kHz * Nominal Impedance: 8 ohms * Minimum Impedance: 6.2 ohms * Connectors: (2) Neutrik Speakon NL4\'s * Enclosure Material: Polypropylene structural foam * Suspension: Enclosure has locations for 4 single-studattachment plates and10 forged steel eyebolts - 2 on top, 2 on bottom, 2 onside, and 1 on rear ofenclosure * Grille: Polyester powder coated, 16GA Galvanizedsteel, with rotatable logo * Dimensions (H x W x D): 24.14" x 15.64" x 14.26“ * Net Weight: 43.7 lbs * Shipping Weight: 48.6 lbs |
Active or Passive Passive Frequency Response -10dB:48-20,000Hz Power Capacity 600W Maximum Sound Pressure Level (SPL) 131dB Nominal Sensitivity 97dB Impedance 8 ohms Crossover 2KHz Low Frequency Driver DVX3121, 12" (305mm) Driver High Frequency Driver ND2, 1" (25.4mm) exit Neodymium Enclosure Material Polypropylene Structural Foam Input Connections Glandnut SJO cable Mounting Options Enclosure has locations for 4 Single-StudAttachment Plates and 10 Forged SteelEyebolts - 2 on Top, 2 on Bottom, 2 onSide, and 1 on Rear of Enclosure Dimensions 24.14 x 15.64 x 14.26" (613 x 397 x 362mm) Weight 43.7 lbs (19.8 kg) |
The Electro-Voice® ZX3 offers an unprecedented level of lightweight, 12-inch, two-way, loudspeaker performance for the widest variety of portable and installed applications. Featuring the new DVX3121 12-inch woofer and the ND2 neodymium compression driver, the ZX3 continues the groundbreaking innovation of the EV DVX woofer program, joining the ranks of EV\'s ZX series between the eight-inch ZX1 and the 15-inch ZX5. When it comes to problem and solution versatility, the ZX3 is in a class of its own. In addition to the highest performance drivers available, a complete range of optional accessories, including the CB-5 array kit, MB3 wall and ceiling-mount bracket, HA-3 handle adapter for use with the VSA-1 strong arm mount, and TCA-1 truss clamp adapter allow the ZX3 to be easily and precisely configured in multiple box arrays, mounted on trusses or tripods, deployed as monitors, or used as system mains with a subwoofer. Housed in a stylish yet rugged injection molded enclosure, the ZX3 shares the same functionality as the larger ZX5, with 90 degre x 50 degree or 60 degree x 60 degree horn dispersion patterns, 45 degree or 55 degree monitor angles, passive or biamp operation, and seven M8 rigging points. The ZX3 is available in a weatherized version and in either a black or white finish. An optional HDC-3 heavy-duty stackable cover is also available. |
The DYNACORD VL212 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL212 is ideally suited to be used in most demanding applications. The VL212 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies two rugged DND 12350 transducers are used. The in-line topology guarantees excellent pattern control even for the low-mid frequency range. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL212 can be used in passive fullrange mode and can be switched from the outside to ʽbiampedʼ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations. The VL212 can be used as a general purpose stand-alone fullrange cabinet and as a satellite or delayed system cabinet in larger set ups.
Order No. D 113 133 Cabinet Full-Range Configuration Passive 2-Way Switchable to biamped mode Nominal impedance 4 Ohms Rated power RMS 800 Watts Program power 1600 Watts Peak power 3200 Watts SPL 2,83 V / 1m 2W / 4 Ohm 105 dB Max. SPL 1m (calculated with peak power) 137dB Frequency range ( -10dB ) Full range 80Hz - 19kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 50Hz - 19kHz Coverage angle 1 kHz -6dB 90° * 45° Passive crossover frequency 1.5kHz Active crossover frequency 1.5kHz 24dB/Oct. Linkwitz-Riley, 1,5kHz Linear-Phase FIR Voice coil tracking protection Yes Component HIGH Electro-Voice ND6-8 Neodymium Order No. 361493 Component LOW 2 x DND 12350 Order No. 366559 Connectors Full-Range 1+, 1- Wired through 2+, 2- Connectors Biamped Lo 1+, 1- Hi 2+, 2- Wired through 1+, 1-, 2+, 2- Connector model Speakon 2x NL4 MPR Dimensions (WxHxD) 385x1035x374mm Shipping weight kg Net weight 34kg Enclosure material Birch plywood Finish Black, 2-component paint Grille Powder coated steel, acoustic foam Handles 2
|
Reviews
There are no reviews yet.