LD Systems LDEB122G3 STINGER 12 G3 Παθητικό ηχείο 12″ 400W

496.00 incl. GR VAT

Available on backorder

EAN: 4049521206665
Installments calculation
CompareAdd to wishlist Submit Better Price
2-way passive 8” bass reflex PA speaker 400 watts RMS power handling 125 dB maximum SPL 12″ custom woofer and BMS compression driver BEM optimized HF waveguide for uniform coverage Birch ply cabinet with ultra rugged polyurea finish and M10 suspension points Shock-resistant front grill provides maximum speaker protection 36 mm Dual-Tilt pole receptacle for […]

 

Read more

  • 2-way passive 8” bass reflex PA speaker
  • 400 watts RMS power handling
  • 125 dB maximum SPL
  • 12″ custom woofer and BMS compression driver
  • BEM optimized HF waveguide for uniform coverage
  • Birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
  • Shock-resistant front grill provides maximum speaker protection
  • 36 mm Dual-Tilt pole receptacle for 0° or 5° mounting angles
  • Large selection of smart installation and transport accessories

STINGER 12 G3

Engineered for rock-solid reliability day in, day out this passive 2-way loudspeaker is a truly professional performer. With its multi-purpose bass reflex construction it is equally suitable for fullrange, satellite or floor monitor use in live PA systems and permanent installations. The Stinger® 12 G3 boasts a mighty 400 watts RMS power handling and 125 dB maximum sound pressure. It is loaded with a custom designed 12” woofer and BMS compression driver delivering extended low frequency response and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern. The Stinger® 12 G3 is designed to be a real workhorse throughout. The enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 12 G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.

Product type PA loudspeaker


Type passive


Low/mid driver dimensions 12 ”


Woofer Size 304.8 mm


Woofer magnet Ferrite


Woofer brand Custom-made


Woofer voice coil 2.5 ”


Woofer voice coil (mm) 63.5 mm


Horn CD horn


HF driver dimensions 1 ”


HF Driver Size 25.4 mm


HF driver magnet Ferrite


HF driver brand BMS


HF driver voice coil 1 ”


HF Driver Voice Coil 25.4 mm


Dispersion (H x V) 90 ° x 50 °


Load rating (RMS) 400 W


Peak power 800 W


Frequency response 58 – 20000 Hz


SPL (1W/1m) 99 dB


Max. SPL 125 dB


Impedance 8 Ohm(s)


Protection circuits HF Driver


Loudspeaker inputs 1


Speaker input connections Speakon compatible


Loudspeaker outputs 1


Speaker output connections Speakon compatible


Cabinet material 15 mm Plywood


Cabinet surface Polyurea


Cabinet construction vented


Monitor angle 54 °


Width 390 mm


Height 627 mm


Depth 377 mm


Weight 17,7 kg

Weight 18.00 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems LDEB122G3 STINGER 12 G3 Παθητικό ηχείο 12″ 400W”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems LDEB122G3 STINGER 12 G3 Παθητικό ηχείο 12" 400W removeDYNACORD D12W Fullrange 2-Way Speaker White 300 Watts removeDYNACORD VariLine VL122 Ηχείο Fullrange 2-Δρόμων 400 Watts removeELECTRO VOICE ZX3-60PI SPEAKER 2 WAY 600W removeDYNACORD D12 Fullrange 2-Way Speaker 300 Watts removeBEHRINGER B212XL Eurolive 200W Continuous remove
NameLD Systems LDEB122G3 STINGER 12 G3 Παθητικό ηχείο 12" 400W removeDYNACORD D12W Fullrange 2-Way Speaker White 300 Watts removeDYNACORD VariLine VL122 Ηχείο Fullrange 2-Δρόμων 400 Watts removeELECTRO VOICE ZX3-60PI SPEAKER 2 WAY 600W removeDYNACORD D12 Fullrange 2-Way Speaker 300 Watts removeBEHRINGER B212XL Eurolive 200W Continuous remove
Image
SKULDEB122G3E009283E009313001975E009263E005644
Rating
Price 496.00 incl. GR VAT 1,509.00 incl. GR VAT 2,885.00 incl. GR VAT1,092.00 incl. GR VAT 862.00 incl. GR VAT 169.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • 2-way passive 8” bass reflex PA speaker
  • 400 watts RMS power handling
  • 125 dB maximum SPL
  • 12" custom woofer and BMS compression driver
  • BEM optimized HF waveguide for uniform coverage
  • Birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
  • Shock-resistant front grill provides maximum speaker protection
  • 36 mm Dual-Tilt pole receptacle for 0° or 5° mounting angles
  • Large selection of smart installation and transport accessories
STINGER 12 G3 Engineered for rock-solid reliability day in, day out this passive 2-way loudspeaker is a truly professional performer. With its multi-purpose bass reflex construction it is equally suitable for fullrange, satellite or floor monitor use in live PA systems and permanent installations. The Stinger® 12 G3 boasts a mighty 400 watts RMS power handling and 125 dB maximum sound pressure. It is loaded with a custom designed 12” woofer and BMS compression driver delivering extended low frequency response and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern. The Stinger® 12 G3 is designed to be a real workhorse throughout. The enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 12 G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications. Product type PA loudspeaker
Type passive
Low/mid driver dimensions 12 "
Woofer Size 304.8 mm
Woofer magnet Ferrite
Woofer brand Custom-made
Woofer voice coil 2.5 "
Woofer voice coil (mm) 63.5 mm
Horn CD horn
HF driver dimensions 1 "
HF Driver Size 25.4 mm
HF driver magnet Ferrite
HF driver brand BMS
HF driver voice coil 1 "
HF Driver Voice Coil 25.4 mm
Dispersion (H x V) 90 ° x 50 °
Load rating (RMS) 400 W
Peak power 800 W
Frequency response 58 - 20000 Hz
SPL (1W/1m) 99 dB
Max. SPL 125 dB
Impedance 8 Ohm(s)
Protection circuits HF Driver
Loudspeaker inputs 1
Speaker input connections Speakon compatible
Loudspeaker outputs 1
Speaker output connections Speakon compatible
Cabinet material 15 mm Plywood
Cabinet surface Polyurea
Cabinet construction vented
Monitor angle 54 °
Width 390 mm
Height 627 mm
Depth 377 mm
Weight 17,7 kg

With the newly designed D12W, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust highperformance professional 12" 2-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
With a variety of suspension accessories and conservative cosmetics, the D12 is ideally suited to be used in demanding fixed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road.
For low frequencies an Electro-Voice DL12BFH is used. The recently developed Electro-Voice ND2 Neodymium driver is used for the projection of mid and high frequencies. The Constant- Direcctivity HF horn has been integrated into the baffle by CAD methods.Nominal coverage angle of the cabinet is 80°*40°, horizontal*vertical respectively. Power handling of the cabinet is 300W (continuous) and 1200W peak.. Maximum sound pressure level is 129dB, the frequency range of the D12 is 70Hz to 18kHz. The D12 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in in highperformance small-format active and passive satellite systems.

Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL122 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL122 is ideally suited to be used in most demanding applications. The VL122 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies the rugged DND 12350 Transducer is used. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL122 can be used in passive fullrange mode and can be switched from the outside to ʽbiampedʼ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations.

Order-# D113103 Cabinet Full-Range Configuration passive 2-Way or Biamped Mode Nominal Impedance 8 ohms Rated Power RMS 400 watts Program Power 800 watts Peak Power 1600 watts SPL 2,83 V/1m 99 dB max. SPL 1m (calc. with Peak) 131 dB Freq. Range (-10 dB) 60Hz - 20Hz Coverage Angle nom. 90° x 45° Passive X-Over Frequency 1,5 kHz VCT Protections yes Components HIGH Ev ND6-8 Order-# D361493 Components LOW DND 12350 Order-# D366559 Connectors SPEAKON 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF 2+/2- Pin Wiring Biamped LF 1+/1- Dimensions (WxHxD) mm 385x 715x 374 Net Weight 24 kg Enclosure Material Birch Plywood Finish Black 2-Component Structure Paint Grille Powder Coated Steel, Acoustic Foam

The Electro-Voice ZX3 offers an unprecedented level of lightweight 12-inch two-way loudspeaker performance for the widest variety of portable and installed applications. Featuring the new DVX3121 12-inch woofer and the ND2 neodymium compression driver, ZX3 continues the groundbreaking innovation of the Electro-Voice DVX woofer program, joining the ranks of EVs ZX series between the 8-inch ZX1 and the 15-inch ZX5.
When it comes to problem/solution versatility, ZX3 is truly in a class of its own. In addition to the highest performance drivers available, a complete range of optional accessories, including the CB-5 array kit, MB3 wall/ceiling mount bracket, HA-3 handle adapter for use with the VSA-1 strong arm mount, and TCA-1 truss clamp adapter, allow ZX3 to be easily and precisely configured in multiple box arrays, mounted on truss or tripods, deployed as monitors, or used as system mains with a subwoofer.
Housed in a stylish yet rugged injection molded enclosure, ZX3 shares the same functionality as the larger ZX5, with 90° x 50° or 60° x 60° horn dispersion patterns, 45° or 55° monitor angles, passive or bi-amp operation, and seven M8 rigging points. ZX3 is available in a weatherized version and in either black or white finish. The optional HDC-3 heavy duty stackable cover is also available.   Specifications

Frequency Response (-3dB) 58 - 15000 Hz
Frequency Response (-10dB) 48 - 20000 Hz
Sensitivity 1W/1m 97 dB
System Power Handling (continuous/program/peak) 600/1200/2400 Watts
Low Frequency Power Handling (continuous/program/peak) 500/1000/2000 Watts
High Frequency Power Handling (continuous/program/peak) 40/80/160 Watts
LF Transducer DVX3121
HF Transducer ND2
Enclosure Material Polypropylene
Color Black
Outdoor Yes
Speaker Type Fullrange
Weight Net 19.8 kg ( 43.65 lbs )

With the newly designed D12, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust highperformance professional 12" 2-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
With a variety of suspension accessories and conservative cosmetics, the D12 is ideally suited to be used in demanding fi xed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road.
For low frequencies an Electro-Voice DL12BFH is used. The recently developed Electro-Voice ND2 Neodymium driver is used for the projection of mid and high frequencies. The Constant- Direcctivity HF horn has been integrated into the baffl e by CAD methods.Nominal coverage angle of the cabinet is 80°*40°, horizontal*vertical respectively. Power handling of the cabinet is 300W (continuous) and 1200W peak.. Maximum sound pressure level is 129dB, the frequency range of the D12 is 70Hz to 18kHz. The D12 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in in highperformance small-format active and passive satellite systems.

Cabinet Full-Range Configuration Passive 2-Way Nominal Impendance 8 ohms Rated power RMS 300 W Program power 600 W Peak power 1200 W SPL 2,83V / 1m (1W/8 ohms) 98 dB Max. SPL 1m (calc. with peak) 129 dB Frequency range (-10dB) 70Hz - 18 kHz Nominal Coverage angle 80° x 40° Passive crossover frequency 1,5 kHz Voice ceil tracking protection Yes Component High ND2 S-8 Component Low DL 12 BFH Connectors 1+/1- Wired through 2+/2- Connector model Speakon 2x NL4 MPR Dimensons (WxHxD) mm 429,5 x 596 x 320,5 Shipping weight 17 kg Net weight 16 kg Enclosure material Polypropylene Finish Black Grille, Steel Powder coated Front b/w Acoustic Foam Handles 1

  • High-power 2-way PA sound reinforcement speaker system for live and playback applications (200 Watts Continuous / 800 Watts Peak Power)
  • Available in black or white finish
  • Ultra-compact and light weight system delivers excellent sound even at extreme sound pressure levels
  • Extremely powerful 12" long-excursion driver provides incredibly deep bass and acoustic power
  • State-of-the-art 1.75'' titanium-diaphragm compression driver for exceptional high-frequency reproduction
  • Ultra-wide dispersion, large-format exponential horn
  • Overload-protection circuitry ensures optimal HF driver protection
  • Versatile trapezoidal enclosure design allows different positioning:
  • -Stand mounting with 35-mm pole socket
  • -Tilts on its side for use as a floor monitor
  • Optional swiveling mounting brackets
  • Ergonomically shaped handles for easy carrying and setup
  • 2 professional speaker connectors plus 1⁄4'' jack connectors
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany
These loudspeakers take everything musicians love about the original B212 loudspeakers and upgrade them with the same bass and treble/mid transducers found in our wildly popular B212A active version for even better sound and power handling. And with integrated overload protection circuitry, they arrive ready to push it to the limit without putting their high or low frequency drivers in danger. Triumphant transducers Every stitch of these loudspeakers is built to deliver, but the fact is that their transducers (woofers and tweeters) are the only part you actually hear. While some manufacturers are okay with putting off-the-shelf transducers in their boxes, we custom-design and build ours from scratch. Not only do we wind our own voice coils, we grow the trees that are processed into the paper pulp that becomes the cones. We even machine the frames and backplates. BEHRINGER's quality is truly under control. Big sound, lightweight, low price Big here, small there, lots of this, light on that—everyone's got their preferences, but the EUROLIVE B212XL has proportions we can all agree upon. These loudspeakers pack a clean, punchy wallop (and can handle up to 800 Watts), they are easy to lift by their recessed handles (24 lbs) and are available at insanely low prices. Who wouldn't want to hook up with one of these beauties? Get on the stick…or get on down The B212XL is perfect either as part of a PA system or as an onstage monitor. If the situation calls for a PA, mount the speakers on stands via the 35mm pole socket. From there, send a line from the MAIN OUT of a mixer (such as a XENYX 1202FX) to a power amplifier (like the EUROPOWER EP1500). Finally, attach a B212XL to each of the amp's outputs. These loudspeakers have inputs for both professional speaker cable and ¼" cable. Because they have two parallel inputs, you can connect up to two of them to any channel on a power amp. But these loudspeakers don't have to be confined to an upright position. Just lay them on their sides for use as a floor monitor. You'll find that they tilt to the ideal angle for onstage monitor wedge applications. Choose white, black, on or off the wall… You asked for it, and now we're proud to offer these amazing loudspeakers in black or white. We now also make swiveling wall-mount brackets for the B212XL. That means they're ready to fit even more comfortably into a venue's color scheme and layout. No matter what your sound or aesthetic needs may be, we make one that's just right for you!
Weight18.00 kg19.00 kg24.00 kg19.80 kg17.00 kg10.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 18.00 kg
Weight 19.00 kg
Weight 24.00 kg
Weight 19.80 kg
Weight 17.00 kg
Weight 10.50 kg