LD Systems LDEB122G3 STINGER 12 G3 Παθητικό ηχείο 12″ 400W

• 2-way passive 8” bass reflex PA speaker
• 400 watts RMS power handling
• 125 dB maximum SPL
• 12" custom woofer and BMS compression driver
• BEM optimized HF waveguide for uniform coverage
• Birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
• Shock-resistant front grill provides maximum speaker protection
• 36 mm Dual-Tilt pole receptacle for 0° or 5° mounting angles
• Large selection of smart installation and transport accessories

The C5212 L is a full range extremely narrow dispersion two-way loudspeaker system for medium throw applications.

The high-frequency section is a constant directivity horn loaded to a 1.4” Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion.
The 60° x 40° horn design offers higher sensitivity for longer distance applications.
The low-frequency transducer is a 12” woofer with a 3” voice coil.
The crossover is easily bypassed for bi-amp via a recessed changeover switch.
 

Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL122 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL122 is ideally suited to be used in most demanding applications. The VL122 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies the rugged DND 12350 Transducer is used. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL122 can be used in passive fullrange mode and can be switched from the outside to ʽbiampedʼ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations.

Order-# D113103 Cabinet Full-Range Configuration passive 2-Way or Biamped Mode Nominal Impedance 8 ohms Rated Power RMS 400 watts Program Power 800 watts Peak Power 1600 watts SPL 2,83 V/1m 99 dB max. SPL 1m (calc. with Peak) 131 dB Freq. Range (-10 dB) 60Hz - 20Hz Coverage Angle nom. 90° x 45° Passive X-Over Frequency 1,5 kHz VCT Protections yes Components HIGH Ev ND6-8 Order-# D361493 Components LOW DND 12350 Order-# D366559 Connectors SPEAKON 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF 2+/2- Pin Wiring Biamped LF 1+/1- Dimensions (WxHxD) mm 385x 715x 374 Net Weight 24 kg Enclosure Material Birch Plywood Finish Black 2-Component Structure Paint Grille Powder Coated Steel, Acoustic Foam

The MI-112 is a 2-way passive full range loudspeaker that utilizes a 12? cone
low frequency transducer and a 1? throat compression driver with titanium
diaphragm. The multi-angle cabinet is constructed of Complex Aggregate Board
and finished with a hard-wearing black carpet. Two bar handles and a steel grille
sealed against corrosion using a polyamide powder coat finish are provided. A 35
mm tripod socket allows for stand mounting.
APPLICATIONS:
Intended for use in portable sound reinforcement and P.A.

FEATURES:
2-way vented loudspeaker system
1 x 12" speaker
1" compression driver with constant directivity horn
225 W power handling
Highly resistant CAB enclosure

SPECIFICATIONS:
RMS (Average) Power HandlingR: 225 W
Program Power HandlingP: 450 W
Peak Power HandlingK: 900 W
On-axis Frequency RangeF: 60 Hz - 16 kHz
Nominal Impedance: 8 Ω
On-axis Sensitivity 1W / 1 mS: 98 dB SPL
Rated Peak SPL at Full Power:128 dB
Nominal -6 dB BeamwidthsB: 90° Horizontal
(average, 500 Hz to 8 kHz) 75° Vertical
Speech Coverage AnglesC: 90° Horizontal x 80° Vertical
Enclosure Material:Complex Aggregate Board
Finish:Blue Gray carpet
Connector: 2 paralleled NL4 Speakon, wired
Dimensions (H x W x D): 59 x 43 x 35 cm / 26.5 x 19 x 15.4 in
Weight: 20.3 kg/ 45 lbs
Shipping Weight: 23.5 kg/ 52 lbs

The DYNACORD VL212 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL212 is ideally suited to be used in most demanding applications. The VL212 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies two rugged DND 12350 transducers are used. The in-line topology guarantees excellent pattern control even for the low-mid frequency range. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL212 can be used in passive fullrange mode and can be switched from the outside to ʽbiampedʼ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations. The VL212 can be used as a general purpose stand-alone fullrange cabinet and as a satellite or delayed system cabinet in larger set ups.

Order No. D 113 133 Cabinet Full-Range Configuration Passive 2-Way Switchable to biamped mode Nominal impedance 4 Ohms Rated power RMS 800 Watts Program power 1600 Watts Peak power 3200 Watts SPL 2,83 V / 1m 2W / 4 Ohm 105 dB Max. SPL 1m (calculated with peak power) 137dB Frequency range ( -10dB ) Full range 80Hz - 19kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 50Hz - 19kHz Coverage angle 1 kHz -6dB 90° * 45° Passive crossover frequency 1.5kHz Active crossover frequency 1.5kHz 24dB/Oct. Linkwitz-Riley, 1,5kHz Linear-Phase FIR Voice coil tracking protection Yes Component HIGH Electro-Voice ND6-8 Neodymium Order No. 361493 Component LOW 2 x DND 12350 Order No. 366559 Connectors Full-Range 1+, 1- Wired through 2+, 2- Connectors Biamped Lo 1+, 1- Hi 2+, 2- Wired through 1+, 1-, 2+, 2- Connector model Speakon 2x NL4 MPR Dimensions (WxHxD) 385x1035x374mm Shipping weight kg Net weight 34kg Enclosure material Birch plywood Finish Black, 2-component paint Grille Powder coated steel, acoustic foam Handles 2

Electro-Voice TX1122 Tour-X 2-Way 12" PA Speaker
The Electro-Voice TX1122 is a high power, 2-way loudspeaker system that can be used in a variety of applications where high-quality sound reinforcement is required in a lightweight package.

It utilizes the DH3, high output 1.25" titanium compression driver, coupled to a constant directivity 90 degree x 50 degree horn. This combination results in a smooth response to 20 kHz and excellent pattern control in short to medium throw applications.

The SMX2120 12" woofer has an FEA optimized magnet structure for very low distortion and maximum intelligibility at high SPL levels. The crossover uses steep 24dB/octave slopes with equalization for very smooth response in vocal range, extended HF, and a protection circuit for long-term reliability.

It has a variety of features that make it equally suited for portable or fixed installation applications. The trapezoidal enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat for maximum strength while still remaining lightweight. The unique grille design is very strong, dent resistant, and features a rotatable logo. Four-way handles allow for gripping in a variety of positions, a pole mount allows for placement on a subwoofer or a tripod. Six 3/8" threaded points allow a single TX1122 to be suspended in a various positions. The recessed input panel with dual NL4 connectors keeps the connectors hidden, while allowing it to be used with the TX1181 subwoofer for extended sub bass on a single amplifier channel, with no additional processing needed.

Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!

• Freq. response (-3 dB): 60Hz - 20kHz
• Freq. range (-10 dB): 45Hz - 20kHz
• Rec. Hi-pass frequency: 45Hz
• Axial sensitivity: 97dB (1W/1m)
• Max. calculated SPL: 130dB
• Horizontal coverage: 90 degree
• Vertical coverage: 50 degree
• Power handling: 500W continuous, 2000W peak
• LF transducer: SMX2120, 12" (305mm) driver
• HF transducer: DH3, 1.25" (32mm) diaphragm compression driver
• Crossover frequency: 1750Hz
• Nominal impedance: 8 Ohms
• Minimum impedance: 5.4 Ohms
• Connectors: (2) Neutrik Speakon NL4\'s
• Enclosure material: plywood and MDF with EVCoat
• Grille: 16 GA steel, black powdercoat, with rotatable logo
• Suspension: (6) 3/8" threaded points - (2) on each side and (2) on the rear of enclosure
• Dimensions (H x W x D): 24.3" x 15.0" x 15.0" (616mm x 382mm x 380mm)
• Net weight: 44.5lbs (20.2 kg)
• Shipping weight: 50.0lbs (22.7 kg)