Content | User´s Manual
Technical drawing
LD Systems STINGER 28 A G3
Active 2 x 8" 2-way bass-reflex PA speaker
- Active 2 x 8" 2-way bass-reflex PA speaker
- 131 dB max. SPL and 500-watt RMS performance with a highly-efficient digital amplifier
- Perfect all-rounder for full-range, satellite and monitor applications
- Practical presets for fast and user-specific frequency tuning
- Homogeneous dispersion pattern thanks to a BEM-optimised tweeter wave guide
- Two 8" custom woofers and BMS tweeter driver
- Distortion-free sound at even maximum volumes, thanks to DynX® DSP technology
- 2 line/mic input channels with individual gain controllers plus mono mix output
- Birch plywood housing with ultra-robust polyurea coating and M10 rigging points
- Shock-resistant front grille for optimum speaker protection
- 36 mm dual tilt stand attachment with 0° and 5° tilt angle
- Extensive and smart accessories for installation and transport
This highly professional 2-way active system is designed for absolute, long-term reliability. With its rugged bass reflex housing and finely tuned, user-friendly presets, it is suitable for use as a full-range speaker, satellite or monitor. The Stinger® 28 A G3 is powered by a highly efficient Class-D amplifier with a powerful 500-watt continuous output. Its two specially developed 8" woofers and a BMS tweeter driver achieve a powerful bass response and fresh, natural trebles. The wave guide of the tweeter has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflection from floors and ceilings and prevents sidelobe levels, thus achieving controlled and homogeneous dispersion.
LD Systems’ proprietary DynX® DSP technology means that the Stinger® 28 A G3 delivers perfect performance with maximum clarity and power under all conditions. The signal processing of the crossover function and the multi-band limiter achieve an optimal runtime and high freedom from distortion. Designed as an all-around workhorse, the housing of the speaker is made of robust birch plywood. An extremely resilient coating of polyurea offers exceptional robustness and durability. The features include a steel front grille, a dual-tilt stand attachment, flight points and ergonomic handles. The Stinger® 28 A G3 is a good value and attractive solution for professional sound systems, with extensive accessories that support usage on the stage and in fixed installations.
Product type
PA loudspeaker
Type
active
Low/mid driver dimensions
2 x 8 "
Woofer size
2 x 203.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
BMS
HF driver voice coil
1 "
HF Driver Voice Coil
25.4 mm
Amplifier
Class D
Dispersion (H x V)
90 x 50 °
RMS
500 W
Peak power
1000 W
Frequency response
58 - 20000 Hz
Max. SPL (peak)
131 dB
Protection circuits
Multiband limiter , over voltage , over-current , thermal overload
Input sensitivity
-5 dBu
Controls
2 x gain , 2 x Mic/Line , Mode
Indicators
Limit , Mode , On , Protect (protection circuit engaged) , Signal
Line inputs
2
Line input connectors
6.3 mm jack , XLR
Line outputs
1
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Operating Temperature
0 - 40 °C
Relative Humidity
< 80% (non-condensing)
Cabinet material
12 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
vented
Width
270 mm
Height
756 mm
Depth
290 mm
Weight
20,5 kg |
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Processed Active Monitor
200W+ 50W RMS - 124dB SPL
- 200mm (8’’) custom woofer with improved efficiency and linearity
- 200Wrms class D amplifier for LF and 50Wrms for HF.
- Low noise toroidal transformer power supply
- On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
- 2 DSP preset for maximum acoustical flexibility
- Available in white colour 8AW
Code: |
37689 / 37906 White |
Configuration: |
2 way |
Built-in amplifier LF/HF: |
200/50 W RMS |
Built-in amplifier peak LF/HF: |
400/100 W |
Frequency response: |
60Hz - 20KHz -6dB |
Low Frequency woofer: |
8 - 1.7 coil inch |
High Frequency driver: |
1 -1 coil inch |
Maximum SPL cont/peak: |
120/124 dB |
Dispersion: |
90° x 60° HxV |
Input impedance: |
22 Kohm |
Crossover Frequency: |
2.5 KHz |
AC Power requirements: |
160 VA |
Input connector: |
XLR - jack with loop |
Power cord: |
5 / 16.4 m/ft |
Net Dimension (WxHxD): |
255x415x245 - 10.03x16.33x9.64 mm/inch |
Net Weight: |
8.2 / 18.7 Kg/lb |
Transport Dimension (WxHxD): |
330x480x320 - 12.99x18.89x12.59 mm/inch |
Transport Weight: |
9.7 / 21.38 Kg/lb |
|
The D 8A is the active version of the D 8 offering integrated Class-D power amplifiers, an electronic crossover and loudspeaker equalization.
The D 8A is ideal when combined with active subwoofers for the creation of very compact, active 3-way high-powered systems. For the low- and high frequency ranges, 2x 200 W RMS are available. The maximum overall amplifier output comes to 800 W. The frequency-range is 56 Hz - 20 kHz and the max. SPL is 123 dB / 1m)
The Line input is implemented as an XLR/jack combo socket. In addition an XLR microphone input with a separate level control is available. For operation with powered subwoofers, a switchable low-cut filter is provided.
The extensive range of optional accessories allows virtually unlimited use in fixed installations or flown configurations.
Cabinet Fullrange
Configuration Powered 2-Way
Components 8" / 1“
Rated Power RMS 200 W LF / 200 W HF
Max. Amplifier Output Capability 400 W LF / 400 W HF
max. SPL / 1m 123 dB
Frequency Range (-10 dB) 56 Hz - 20 kHz
Radiation-Pattern H x V 90° x 90°
Dimensions mm (W x H x D) 282 x 442 x 259
Weight 9 kg
|
- 2000W power via ultra-efficient Class-D amplification
- TruSourceTM Technology
- Mackie designed, vertically-aligned, common-magnet TruSource driver
- 8″ LF woofer / 1.75″ HF compression driver
- Incredibly compact, lightweight design
- Powerful TruSource DSP delivers seamless clarity, consistent dispersion and unmatched fidelity
- DL2 Integrated Digital Mixer
- Powerful, one-touch digital mixer with bright OLED screen
- Two highly-versatile input channels with FX
- Independent channel level, 3-band EQ and effects control
- 16 great-sounding channel effects include reverb, chorus and delay
- XLR/TRS combo and dual RCA connectors
- Handles mic, line, stereo and instrument signals
- Unmatched system control for professional applications
- Multi-band feedback destroyer
- Six speaker modes deliver the perfect voicing for your application
- Alignment delay up to 300ms for delay stack, balcony, etc.
- Three memory locations for instant venue setting recall
- Smart Protect DSP dynamically protects amp/driver
- Innovative ultra-compact design
- 1/3 smaller than a traditional 2-way
- Fit an entire DLM system in nearly any car
- Stack them up for storage
- Pole-mountable on tripod or atop DLM12S using SPM300 speaker pole
- Flyable via standard M10 rigging hardware
- Wall-mount them using SWM300 articulated arm for stealthy, powerful install system
- Roadworthy PC-ABS cabinet with pro black finish and ergonomic top carry handle
- Rugged, powder-coated 20 gauge steel grille
- Integrated kickstand delivers perfect angle for personal monitor use
- Ridiculously lightweight (22 lbs. / 10kg)
|
User's manual - LDSATG2 [4,73 MB] |
|
|
The LD Systems SAT82AG² is an active installation monitor, which provides a convincing performance on a PC or laptop and as a home studio monitor.
The compact 2-way bass reflex design is equipped with an 8" custom-made woofer and a 1" compression driver which are driven by an 80 Watt Class AB power amplifier. The input is a combo socket; an XLR socket is used to loop through the signal. With a frequency response of 50 Hz - 20 kHz and 114 dB maximum sound pressure, the SAT82AG² produces a balanced sound with high dynamics. The monitor features protection circuits for the tweeter against overcurrent, and a switchable power saving mode that automatically switches to standby if there is no signal for 3 minutes.
The cabinet of the SAT82G² is made of 12mm MDF with M6 flight points and is available in black or white with a durable textured paint finish. A versatile mounting bracket is included; a universal joint mount is available as an accessory.
- Product Type: installation monitor
- Type: active
- Woofer Size: 8“
- Woofer Size: 203.2 mm
- Woofer Magnet: ferrite
- Woofer Brand: custom-made
- HF Driver Size: 1“
- HF Driver Size: 25 mm
- HF Driver Magnet: ferrite
- HF Driver Brand: custom-made
- Amplifier (A): Class A/B
- Dispersion Angle (H x V): 60° x 60°
- Power Output (RMS): 80 W
- Frequency Response: 50 Hz - 20,000 Hz
- Max SPL: 114 dB
- Protection: overcurrent, HF drivers
- Controls: volume, power switch (on/off), power mode (on/auto)
- Indicators: Power, Overload
- Line Input Connectors: 6.3 mm TRS, XLR
- Line Output Connectors: XLR
- Power Supply: transformer
- Operating Voltage: 220 V AC - 240 V AC, 50 - 60 Hz
- Cabinet Material: 12 mm MDF
- Cabinet Surface: textured coating
- Cabinet Colour: black
- Cabinet Type: bass reflex
- Width: 274 mm
- Height: 410 mm
- Depth: 243 mm
- Features: wall bracket
|
|
Dedicated PA speaker system for fixed installations 2-way bass-reflex system for powerful bass 20 cm woofer (8“) and 2.5 cm dome tweeter (1“) White or titanium plastic housing (ABS) with metal grille Trapezoidal cabinet for corner installation Movable mounting bracket for ceiling or wall installation Ideal for PA applications in restaurants, bars, discos, shops, conferences, etc. |
Reviews
There are no reviews yet.