LD SYSTEMS LDEB282G3 STINGER Loudspeaker Passive 2way 2 x 8″ 400 Wrms

471.19 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: 4049521228179
Installments calculation
CompareAdd to wishlist Submit Better Price
User´s ManualTechnical drawing LD Systems STINGER 28 G3 Passive 2 x 8″ 2-way bass-reflex PA speaker 2-way passive 2 x 8” bass reflex PA speaker 400 watts RMS power handling 125 dB maximum SPL 2 x 8″ custom woofer and BMS compression driver BEM optimized HF waveguide for uniform coverage Birch ply cabinet with ultra […]

 

Read more

User´s Manual
Technical drawing

LD Systems STINGER 28 G3
Passive 2 x 8″ 2-way bass-reflex PA speaker

  • 2-way passive 2 x 8” bass reflex PA speaker
  • 400 watts RMS power handling
  • 125 dB maximum SPL
  • 2 x 8″ custom woofer and BMS compression driver
  • BEM optimized HF waveguide for uniform coverage
  • Birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
  • Shock-resistant front grill provides maximum speaker protection
  • 36 mm Dual-Tilt pole receptacle for 0° or 5° mounting angles
  • Large selection of smart installation and transport accessories

Engineered for rock-solid reliability day in, day out this passive 2-way loudspeaker is a truly professional performer. With its multi-purpose bass reflex construction it is equally suitable for fullrange, satellite or monitor use in live PA systems and permanent installations. The Stinger® 28 G3 boasts a mighty 400 watts RMS power handling and 125 dB maximum sound pressure. It is loaded with dual custom designed 8” woofers and a BMS compression driver delivering a punchy low end and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern.

The Stinger® 28 G3 is designed to be a real workhorse throughout. The enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 28 G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.

Product type
PA loudspeaker


Type
passive


Low/mid driver dimensions
2 x 8 ”


Woofer size
2 x 203.2 mm


Woofer magnet
Ferrite


Woofer brand
Custom-made


Woofer voice coil
2 ”


Woofer voice coil (mm)
50.8 mm


Horn
BEM optimized CD Horn


HF driver dimensions
1 ”


HF Driver Size
25.4 mm


HF driver magnet
Ferrite


HF driver brand
BMS


HF driver voice coil
1 ”


HF Driver Voice Coil
25.4 mm


Dispersion (H x V)
90 x 50 °


Load rating (RMS)
400 W


Peak power
800 W


Frequency response
58 – 20000 Hz


SPL (1W/1m)
99 dB


Max. SPL
125 dB


Impedance
8 Ohm(s)


Protection circuits
HF Driver


Loudspeaker inputs
1


Speaker input connections
Speakon compatible


Loudspeaker outputs
1


Speaker output connections
Speakon compatible


Speakers per amplifier channel (DSP44/45K)
3


Cabinet material
12 mm Plywood


Cabinet surface
Polyurea


Cabinet construction
vented


Width
270 mm


Height
756 mm


Depth
290 mm


Weight
19,3 kg

Weight 20.00 kg

Reviews

There are no reviews yet.

Be the first to review “LD SYSTEMS LDEB282G3 STINGER Loudspeaker Passive 2way 2 x 8″ 400 Wrms”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD SYSTEMS LDEB282G3 STINGER Loudspeaker Passive 2way 2 x 8" 400 Wrms removeJBL AM 7200/95-WRC 2-Way MID/HIGH Passive Loudspeaker 450W removeJBL CONTROL 128W In-Wall Loudspeaker, 6.5" 2-way removeJBL AC 18/26 2-Way Speaker 500 Watts removeRCF C3108: 300 W AES, 8", 1", TWO-WAY PASSIVE SPEAKER removeJBL AM 7200/95 2-Way MID/HIGH Passive Loudspeaker 450W remove
NameLD SYSTEMS LDEB282G3 STINGER Loudspeaker Passive 2way 2 x 8" 400 Wrms removeJBL AM 7200/95-WRC 2-Way MID/HIGH Passive Loudspeaker 450W removeJBL CONTROL 128W In-Wall Loudspeaker, 6.5" 2-way removeJBL AC 18/26 2-Way Speaker 500 Watts removeRCF C3108: 300 W AES, 8", 1", TWO-WAY PASSIVE SPEAKER removeJBL AM 7200/95 2-Way MID/HIGH Passive Loudspeaker 450W remove
Image
SKULDEB282G3AM 7200/95-WRCCONTROL 128WAC 18/26C3108AM 7200/95
Rating
Price 471.19 incl. GR VAT 4,222.00 incl. GR VAT 193.27 incl. GR VAT 1,110.00 incl. GR VAT 614.78 incl. GR VAT 3,063.00 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

Available on backorder

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityOnly 1 left in stock (can be backordered)Available on backorderIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

User´s Manual
Technical drawing

LD Systems STINGER 28 G3
Passive 2 x 8" 2-way bass-reflex PA speaker
  • 2-way passive 2 x 8” bass reflex PA speaker
  • 400 watts RMS power handling
  • 125 dB maximum SPL
  • 2 x 8" custom woofer and BMS compression driver
  • BEM optimized HF waveguide for uniform coverage
  • Birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
  • Shock-resistant front grill provides maximum speaker protection
  • 36 mm Dual-Tilt pole receptacle for 0° or 5° mounting angles
  • Large selection of smart installation and transport accessories

Engineered for rock-solid reliability day in, day out this passive 2-way loudspeaker is a truly professional performer. With its multi-purpose bass reflex construction it is equally suitable for fullrange, satellite or monitor use in live PA systems and permanent installations. The Stinger® 28 G3 boasts a mighty 400 watts RMS power handling and 125 dB maximum sound pressure. It is loaded with dual custom designed 8” woofers and a BMS compression driver delivering a punchy low end and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern.

The Stinger® 28 G3 is designed to be a real workhorse throughout. The enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 28 G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.

Product type PA loudspeaker
Type passive
Low/mid driver dimensions 2 x 8 "
Woofer size 2 x 203.2 mm
Woofer magnet Ferrite
Woofer brand Custom-made
Woofer voice coil 2 "
Woofer voice coil (mm) 50.8 mm
Horn BEM optimized CD Horn
HF driver dimensions 1 "
HF Driver Size 25.4 mm
HF driver magnet Ferrite
HF driver brand BMS
HF driver voice coil 1 "
HF Driver Voice Coil 25.4 mm
Dispersion (H x V) 90 x 50 °
Load rating (RMS) 400 W
Peak power 800 W
Frequency response 58 - 20000 Hz
SPL (1W/1m) 99 dB
Max. SPL 125 dB
Impedance 8 Ohm(s)
Protection circuits HF Driver
Loudspeaker inputs 1
Speaker input connections Speakon compatible
Loudspeaker outputs 1
Speaker output connections Speakon compatible
Speakers per amplifier channel (DSP44/45K) 3
Cabinet material 12 mm Plywood
Cabinet surface Polyurea
Cabinet construction vented
Width 270 mm
Height 756 mm
Depth 290 mm
Weight 19,3 kg

Ειδική έκδοση του AM 7200/95 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
14 σημείων. Πιστοποίηση IP55 κατά πρότυπο IEC
529. Παράδοση κατόπιν παραγγελίας.  

 

 

* 90° x 50° Coverage, rotatable for use in either vertical or horizontal orientation.

    * CMCD™ Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.

    * 2432H High-Frequency Compression Driver

    * PT™ Progressive Transition Waveguide for excellent pattern control with low distortion.

    * Bi-Amp/Passive Switchable.

    * Optional planar array frame kits for a number of array configurations (see AE Series Array Guide).


Frequency Range (-10 dB)       :       260 Hz – 20 kHz

Frequency Response (±3 dB)       :       330 Hz – 18 kHz

Coverage Pattern       :       90°x 50°, rotatable waveguide

Directivity Factor (Q)       :       11

Directivity Index (DI)       :       10.5 dB

Crossover Modes       :       Bi-amp/Passive switchable

Crossover Frequency       :       2.2 kHz

Transducer Power Rating (AES)       :       MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs

Long-Term System Power Rating (IEC)       :       MF/HF: 200 W (800 W peak), 100 hrs

Maximum SPL5       :       Bi-amp mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
Passive mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)

System Sensitivity (1W @ 1m)       :       Passive mode: 108 dB SPL

Nominal Impedance       :       8 ohms

Midrange Driver       :       JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver

Sensitivity (1W @ 1m)
(Midrange)       :       108 dB SPL

High Frequency Driver       :       JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil

Sensitivity (1W @ 1m)
(High Frequency)       :       113 dB SPL

Waveguide       :       PT-K95MH

Enclosure       :       Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood

Suspension Attachment       :       13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware

Finish       :       Black DuraFlex™ finish.
White available upon request.

Grille       :       Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.

Input Connector       :       NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.

Environmental Specifications       :       Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D in vertical cabinet orientation)       :       548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)

Net Weight       :       27.2 kg (60 lb)

Optional Accessories       :       M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.

The JBL Control 128W premium in-wall speaker designed for applications where top performance is required. The high performance 8 inch wooer features apolymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other aimable tweeter designs.

JBL Control 128W at a Glance:

  • 30 Hz - 20 kHz frequency range.
  • 120W continuous program (60W cont. pink, 240W cont. peak).
  • 90 dB sensitivity (1W/1m).
  • High-slope crossover network produces natural sound and even coverage.
  • Optional MTC-128RIF Rough-In-Frame for new construction installation to wallstuds.

50The AC18/26 is a compact, fullrange loudspeaker system designed to provide maximum bandwidth and SPL in a single system package and be visually unobtrusive.  The enclosure design allows for installation very close to walls and ceilings, making it ideal for installation under balconies, columns, or for wall mounting.  The high frequency device is a 1" exit compression driver integrated into a 120° x 60° rotatable PT™ (Progressive Transition) waveguide that provides even coverage throughout the intended listening area.  The AC18/26 utilizes a 8" Symmetrical Field Geometry (SFG™) LF Transducer with a copper-clad aluminum edge wound 2.5" voice coil and a copper-capped pole piece that improves performance by reducing voice coil inductance and distortion.
The multi-ply hardwood enclosure is designed to work in the vertical plane as well as in the horizontal plane. Mounting points are provided for an optional U-bracket and for an OmniMount® type bracket.  The AC18/26 is also equipped with attachment
points located on the bottom of the enclosure for a stand mount accessory.  The plywood enclosure features JBLʼs DuraFlex™ finish and comes with a powder coated steel, foam-backed grille.

Features:
1" Exit Compression Driver with 120° x 60° Coverage PT™waveguide.
8" (205 mm) LF transducer
Compact enclosure
500W Program Power
Dual Neutrik NL4 connectors plus screw terminal
Attachment points for optional U-bracket, third-party OmniMount® typebracket and stand mount accessory.
Specifications:

Frequency Range (-10 dB): 47 Hz -20 kHz
Frequency Response (±3 dB):
f10, 52 Hz - 20 kHz
f3, 63 Hz – 19 kHz
Power Rating:
250W Cont. Pink Noise
500W Program
1000W Peak
Impedance: 8 Ohms
Coverage Pattern: 120° x 60°
Dimensions: 18.5" H x 9.4" W x 10" D (469.9 x 237.5 x 254mm)
Weight: 28.2 lbs. (12.8 kg)

The C3108 is a full range extremely versatile wide-dispersion, low profile, two-way loudspeaker system for near field applications.

Its compact size makes it ideal for low visibility side wall mounting.
The high-frequency section is a constant directivity horn loaded to a 1” neodymium compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is an 8” woofer with a 2” voice coil.
 

Features
90°x 70° CMD (Constant Matching Design) constant directivity horn
Linear/HF boost switch
Rotatable Horn System for horizontal cabinet mounting applications
HF driver AMCDP (Active Mosfet Compression Driver Protection)
LICC (Low Impedance Compensated Crossover) network
4 Suspension points (M10)
Omnimount™ 75 Plate fixing positions on rear of cabinet
35 mm standard internal pole mount

 

Acoustical Specifications
Frequency Response -10 dB:60 Hz÷ 20 kHz
Frequency Response -3 dB:100 Hz÷ 18 kHz
Max SPL @ 1m:120 dB 
Horizontal coverage angle:90° 
Vertical coverage angle:70° 
Directivity index; Q:9.4 
System Sensitivity:94 dB 
Nominal Impedance:8 Ω 
Power Handling:300 Watt 
Peak Power Handling:1200 Watt 
Recommended Amplifier:600 
Protections:Dynamic 
Crossover frequencies:2100 Hz 
TRANSDUCERS
Compression Driver:1" HFdriver, 1.5" voice coil 
Nominal Impedence:8 Ω 
Input Power Rating:25 Watt AES 
Sensitivity:109 dB 
Nominal Impedence:8 Ω 
Input Power Rating:200 Watts AES 
Sensitivity:94 dB 
INPUT SECTION
Input connector:Speakon NL4 
Output connector:Speakon NL4 
CABINET
Cabinet Material:10 mm birch plywood construction 
Hardware:3 x M10, 4 X M5, 2 X M6 inserts 
Pole Mount/Cap:Yes 
Grille:Custom perforated steel grille 
Colour:Black, white, scratch resistant paint 
PHYSICAL SPECIFICATIONS
Height:427 / 16.81 mm/inch 
Width:242 / 9.52 mm/inch 
Depth:228 / 8.98 mm/inch 
Net Weight:10 / 22 Kg/Lbs

 

    * 90° x 50° Coverage, rotatable for use in either vertical or horizontal orientation.

    * CMCD™ Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.

    * 2432H High-Frequency Compression Driver

    * PT™ Progressive Transition Waveguide for excellent pattern control with low distortion.

    * Bi-Amp/Passive Switchable.

    * Optional planar array frame kits for a number of array configurations (see AE Series Array Guide).


Frequency Range (-10 dB)       :       260 Hz – 20 kHz

Frequency Response (±3 dB)       :       330 Hz – 18 kHz

Coverage Pattern       :       90°x 50°, rotatable waveguide

Directivity Factor (Q)       :       11

Directivity Index (DI)       :       10.5 dB

Crossover Modes       :       Bi-amp/Passive switchable

Crossover Frequency       :       2.2 kHz

Transducer Power Rating (AES)       :       MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs

Long-Term System Power Rating (IEC)       :       MF/HF: 200 W (800 W peak), 100 hrs

Maximum SPL5       :       Bi-amp mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
Passive mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)

System Sensitivity (1W @ 1m)       :       Passive mode: 108 dB SPL

Nominal Impedance       :       8 ohms

Midrange Driver       :       JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver

Sensitivity (1W @ 1m)
(Midrange)       :       108 dB SPL

High Frequency Driver       :       JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil

Sensitivity (1W @ 1m)
(High Frequency)       :       113 dB SPL

Waveguide       :       PT-K95MH

Enclosure       :       Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood

Suspension Attachment       :       13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware

Finish       :       Black DuraFlex™ finish.
White available upon request.

Grille       :       Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.

Input Connector       :       NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.

Environmental Specifications       :       Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D in vertical cabinet orientation)       :       548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)

Net Weight       :       27.2 kg (60 lb)

Optional Accessories       :       M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.

Weight20.00 kg27.20 kg5.90 kg12.80 kg12.00 kg27.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 20.00 kg
Weight 27.20 kg
Weight 5.90 kg
Weight 12.80 kg
Weight 12.00 kg
Weight 27.20 kg