LD Systems LDEB82G3 STINGER 300W 2-Way Passive 8” Bass Reflex PA Speaker

332.31 incl. GR VAT

In stock

EAN: 4049521206641
Installments calculation
CompareAdd to wishlist Submit Better Price
Passive 8″ 2-way bass-reflex PA speaker 2-way passive 8” bass reflex PA speaker 250 watts RMS power handling 119 dB maximum SPL 8″ custom woofer and BMS compression driver BEM optimized HF waveguide for uniform coverage Birch ply cabinet with ultra rugged polyurea finish and M10 suspension points Shock-resistant front grill provides maximum speaker protection […]

 

Read more

Passive 8″ 2-way bass-reflex PA speaker

  • 2-way passive 8” bass reflex PA speaker
  • 250 watts RMS power handling
  • 119 dB maximum SPL
  • 8″ custom woofer and BMS compression driver
  • BEM optimized HF waveguide for uniform coverage
  • Birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
  • Shock-resistant front grill provides maximum speaker protection
  • 36 mm Dual-Tilt pole receptacle for 0° or 5° mounting angles
  • Large selection of smart installation and transport accessories
STINGER 8 G3
This highly professional 2-way loudspeaker is designed for absolute, long-term reliability. With its multifunctional bass reflex cabinet as a full range speaker, satellite and ground monitor, it is suited to mobile and fixed PA systems. The Stinger® 8 G3 provides 250 watts of continuous power; the maximum sound pressure level is 118 dB. Its specially developed 8″ woofer and the BMS HF driver achieve a powerful bass reproduction and fresh natural highs. The wave guide of the tweeter has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves a controlled and homogeneous dispersion. The Stinger® 8 G3 is designed as a real all-round workhorse. The cabinet is made from robust birch plywood and offers exceptional stability and durability thanks to its extremely durable polyurea coating. The features include a steel grille, a Dual-Tilt stand attachment, flight points and ergonomic handles. The Stinger® 8 G3 is an affordable solution for professional PA applications; extensive accessories support use on stage and in fixed installations.
Product type
PA loudspeaker

Type
active

Low/mid driver dimensions
8 “

Woofer Size
203.2 mm

Woofer magnet
Ferrite

Woofer brand
Custom-made

Woofer voice coil
2 “

Woofer voice coil (mm)
50.8 mm

Horn
BEM optimized CD Horn

HF driver dimensions
1 “

HF Driver Size
25.4 mm

HF driver magnet
Ferrite

HF driver brand
BMS

HF driver voice coil
1 “

HF Driver Voice Coil
25.4 mm

Amplifier
Class D

Dispersion (H x V)
90 x 50 °

RMS
300 W

Peak power
600 W

Frequency response
70 – 20000 Hz

Max. SPL (peak)
125 dB

Protection circuits
Multiband limiter , over voltage , over-current , thermal overload

Input sensitivity
-9 dBu

Controls
2 x gain , 2 x Mic/Line , mode

Indicators
limit , Mic , mode , on , protect (protection circuit engaged) , signal

Line inputs
2

Line input connectors
6.3 mm Jack , XLR

Line outputs
1

Line output connectors
XLR

Operating voltage
100 – 120 V / 50 – 60 Hz or 200 – 240 V / 50 – 60 Hz (automatic switching) , Switching Power Supply

Operating Temperature
0 – 40 °C

Relative Humidity:
< 80% (non-condensing)

Cabinet material
12 mm Plywood

Cabinet surface
Polyurea

Cabinet construction
vented

Width
270 mm

Height
457 mm

Depth
290 mm

Weight
10,8 kg
Weight 10.00 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems LDEB82G3 STINGER 300W 2-Way Passive 8” Bass Reflex PA Speaker”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems LDEB82G3 STINGER 300W 2-Way Passive 8” Bass Reflex PA Speaker removeJBL AM 7200/95-WRC 2-Way MID/HIGH Passive Loudspeaker 450W removeRCF C3108: 300 W AES, 8", 1", TWO-WAY PASSIVE SPEAKER removeOMNITRONIC C-80 WHITE Speaker 80W RMS removeDYNACORD D-8W 2-Way Speaker 250 Watts White removeRCF P4228: 400 W AES, 2x8", 1,4", WEATHERPROOF TWO WAY LOUDSPEAKER remove
NameLD Systems LDEB82G3 STINGER 300W 2-Way Passive 8” Bass Reflex PA Speaker removeJBL AM 7200/95-WRC 2-Way MID/HIGH Passive Loudspeaker 450W removeRCF C3108: 300 W AES, 8", 1", TWO-WAY PASSIVE SPEAKER removeOMNITRONIC C-80 WHITE Speaker 80W RMS removeDYNACORD D-8W 2-Way Speaker 250 Watts White removeRCF P4228: 400 W AES, 2x8", 1,4", WEATHERPROOF TWO WAY LOUDSPEAKER remove
Image
SKULDEB82G3AM 7200/95-WRCC3108C80WHITEE009281P4228
Rating
Price 332.31 incl. GR VAT 4,222.00 incl. GR VAT 614.78 incl. GR VAT 222.38 incl. GR VAT 855.00 incl. GR VAT 1,013.70 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityIn stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Passive 8" 2-way bass-reflex PA speaker

  • 2-way passive 8” bass reflex PA speaker
  • 250 watts RMS power handling
  • 119 dB maximum SPL
  • 8" custom woofer and BMS compression driver
  • BEM optimized HF waveguide for uniform coverage
  • Birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
  • Shock-resistant front grill provides maximum speaker protection
  • 36 mm Dual-Tilt pole receptacle for 0° or 5° mounting angles
  • Large selection of smart installation and transport accessories
STINGER 8 G3
This highly professional 2-way loudspeaker is designed for absolute, long-term reliability. With its multifunctional bass reflex cabinet as a full range speaker, satellite and ground monitor, it is suited to mobile and fixed PA systems. The Stinger® 8 G3 provides 250 watts of continuous power; the maximum sound pressure level is 118 dB. Its specially developed 8" woofer and the BMS HF driver achieve a powerful bass reproduction and fresh natural highs. The wave guide of the tweeter has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves a controlled and homogeneous dispersion. The Stinger® 8 G3 is designed as a real all-round workhorse. The cabinet is made from robust birch plywood and offers exceptional stability and durability thanks to its extremely durable polyurea coating. The features include a steel grille, a Dual-Tilt stand attachment, flight points and ergonomic handles. The Stinger® 8 G3 is an affordable solution for professional PA applications; extensive accessories support use on stage and in fixed installations.
Product type
PA loudspeaker

Type
active

Low/mid driver dimensions
8 "

Woofer Size
203.2 mm

Woofer magnet
Ferrite

Woofer brand
Custom-made

Woofer voice coil
2 "

Woofer voice coil (mm)
50.8 mm

Horn
BEM optimized CD Horn

HF driver dimensions
1 "

HF Driver Size
25.4 mm

HF driver magnet
Ferrite

HF driver brand
BMS

HF driver voice coil
1 "

HF Driver Voice Coil
25.4 mm

Amplifier
Class D

Dispersion (H x V)
90 x 50 °

RMS
300 W

Peak power
600 W

Frequency response
70 - 20000 Hz

Max. SPL (peak)
125 dB

Protection circuits
Multiband limiter , over voltage , over-current , thermal overload

Input sensitivity
-9 dBu

Controls
2 x gain , 2 x Mic/Line , mode

Indicators
limit , Mic , mode , on , protect (protection circuit engaged) , signal

Line inputs
2

Line input connectors
6.3 mm Jack , XLR

Line outputs
1

Line output connectors
XLR

Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching) , Switching Power Supply

Operating Temperature
0 - 40 °C

Relative Humidity:
< 80% (non-condensing)

Cabinet material
12 mm Plywood

Cabinet surface
Polyurea

Cabinet construction
vented

Width
270 mm

Height
457 mm

Depth
290 mm

Weight
10,8 kg

Ειδική έκδοση του AM 7200/95 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
14 σημείων. Πιστοποίηση IP55 κατά πρότυπο IEC
529. Παράδοση κατόπιν παραγγελίας.  

 

 

* 90° x 50° Coverage, rotatable for use in either vertical or horizontal orientation.

    * CMCD™ Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.

    * 2432H High-Frequency Compression Driver

    * PT™ Progressive Transition Waveguide for excellent pattern control with low distortion.

    * Bi-Amp/Passive Switchable.

    * Optional planar array frame kits for a number of array configurations (see AE Series Array Guide).


Frequency Range (-10 dB)       :       260 Hz – 20 kHz

Frequency Response (±3 dB)       :       330 Hz – 18 kHz

Coverage Pattern       :       90°x 50°, rotatable waveguide

Directivity Factor (Q)       :       11

Directivity Index (DI)       :       10.5 dB

Crossover Modes       :       Bi-amp/Passive switchable

Crossover Frequency       :       2.2 kHz

Transducer Power Rating (AES)       :       MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs

Long-Term System Power Rating (IEC)       :       MF/HF: 200 W (800 W peak), 100 hrs

Maximum SPL5       :       Bi-amp mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
Passive mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)

System Sensitivity (1W @ 1m)       :       Passive mode: 108 dB SPL

Nominal Impedance       :       8 ohms

Midrange Driver       :       JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver

Sensitivity (1W @ 1m)
(Midrange)       :       108 dB SPL

High Frequency Driver       :       JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil

Sensitivity (1W @ 1m)
(High Frequency)       :       113 dB SPL

Waveguide       :       PT-K95MH

Enclosure       :       Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood

Suspension Attachment       :       13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware

Finish       :       Black DuraFlex™ finish.
White available upon request.

Grille       :       Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.

Input Connector       :       NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.

Environmental Specifications       :       Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D in vertical cabinet orientation)       :       548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)

Net Weight       :       27.2 kg (60 lb)

Optional Accessories       :       M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.

The C3108 is a full range extremely versatile wide-dispersion, low profile, two-way loudspeaker system for near field applications.

Its compact size makes it ideal for low visibility side wall mounting.
The high-frequency section is a constant directivity horn loaded to a 1” neodymium compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is an 8” woofer with a 2” voice coil.
 

Features
90°x 70° CMD (Constant Matching Design) constant directivity horn
Linear/HF boost switch
Rotatable Horn System for horizontal cabinet mounting applications
HF driver AMCDP (Active Mosfet Compression Driver Protection)
LICC (Low Impedance Compensated Crossover) network
4 Suspension points (M10)
Omnimount™ 75 Plate fixing positions on rear of cabinet
35 mm standard internal pole mount

 

Acoustical Specifications
Frequency Response -10 dB:60 Hz÷ 20 kHz
Frequency Response -3 dB:100 Hz÷ 18 kHz
Max SPL @ 1m:120 dB 
Horizontal coverage angle:90° 
Vertical coverage angle:70° 
Directivity index; Q:9.4 
System Sensitivity:94 dB 
Nominal Impedance:8 Ω 
Power Handling:300 Watt 
Peak Power Handling:1200 Watt 
Recommended Amplifier:600 
Protections:Dynamic 
Crossover frequencies:2100 Hz 
TRANSDUCERS
Compression Driver:1" HFdriver, 1.5" voice coil 
Nominal Impedence:8 Ω 
Input Power Rating:25 Watt AES 
Sensitivity:109 dB 
Nominal Impedence:8 Ω 
Input Power Rating:200 Watts AES 
Sensitivity:94 dB 
INPUT SECTION
Input connector:Speakon NL4 
Output connector:Speakon NL4 
CABINET
Cabinet Material:10 mm birch plywood construction 
Hardware:3 x M10, 4 X M5, 2 X M6 inserts 
Pole Mount/Cap:Yes 
Grille:Custom perforated steel grille 
Colour:Black, white, scratch resistant paint 
PHYSICAL SPECIFICATIONS
Height:427 / 16.81 mm/inch 
Width:242 / 9.52 mm/inch 
Depth:228 / 8.98 mm/inch 
Net Weight:10 / 22 Kg/Lbs

 

Powerful monitor-speaker

  • Active speaker-system for direct connection with the signal source
  • 2-way speaker-system
  • Clear and powerful sound
  • 2-band EQ master-signal and master-signal
  • Wide range of uses in spite of minimum size
  • Ideal for decentral sound-surroundings, e.g. in bistros, restaurants, bars or studio
  • Delivery includes mounting bracket for ceiling or wall installation

Technical Information:

Power supply: 230 V AC, 50 Hz ~
Power consumption: 125 W
Amplifier power: 80 W
Components: 8" woofer, 1 tweeter
Inputs:
1 Line In XLR
Outputs:
1 Line Out XLR
Max. SPL: 90 dB
Impedance: 8 Ohms
Frequency-range: 40 Hz - 20 kHz
Dimensions (H x W x D): 360 x 270 x 240 mm
Weight: 8 kg (piece)

The D 8 is a light-weight, robust 8“/1”, 2-way plastic cabinet for professional sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D 8 is ideally suited to be used in demanding fixed installations.
The cabinet is manufactured from ABS and therefore is extremely resistant against abuse on the road. For low and mid frequencies a DYNACORD DND8200-8 neodymium transducer is used. The Electro-Voice DH3 driver is used for the projection of the high frequencies. The Constant-Directivity HF horn has been integrated into the baffle by CAD methods. The nominal coverage angle of the cabinet is 90°*90°, horizontal*vertical, respectively.
Power handling of the cabinet is 250 W (rated) and 1000W (peak). The maximum sound pressure level is 124 dB, the frequency range of the D 8 is from 65Hz to 20kHz. The D 8 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in high-performance small-format active and passive satellite systems.
Every transducer is protected against short-term thermal overload with thermal cutout switches and halogen protectors. In case of a potential thermal overload the power applied to the speakers is reduced to a safe level. The protection exhibits ʽsoftʼ switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value.
Extremely durable acoustic foam mounted to a strong powder-coated steel grille protects the loudspeaker components against any mechanical damage. The trapezoidally shaped enclosure also allows employing the cabinet in monitoring applications. A stable, integrated carrying handle and the integrated stand socket for pole-mount stands allow easy transportation and set-up. A protective cover is available as an optional accessory.

The P4228 is a weatherproof full range, wide-dispersion, two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.

The high frequency section is a constant directivity CMD horn loaded with a 1.4” RCF Precision Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a double 8” woofer with a 2.5” voice coil.  The cabinet is asingle piece rotational moulded in medium density polyethylene, full UV protected. The cabinet is equipped with 4 x M8 brass inserts, a stainless steel U-Bracket. The front logo is in aluminium and rotatable. The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing. P 4228 is suitable for indoor and outdoor applications/installations, it meets the requirements of IP 55 code (International Protection Rating).

Features
Weatherproof cabinet IP 55
Aluminium grill and stainless steel bracket
Two 8" high-output LF transducer with 2.5" voice coil
Once RCF Precision Neodymium 1.4" Compression Driver with 2.5" voice coil
110° x 60° constant directivity horn
Built in passive crossover
2° x 15° enclosure sides for array configurations
Active Mosfet Compression Driver Protection

LICC (Low Impedance Compensated Crossover) network

 

Acoustical Specifications
Frequency Response -10 dB:80 Hz÷ 20 kHz
Frequency Response -3 dB:100 Hz÷ 20 kHz
Max SPL @ 1m:129 dB 
Horizontal coverage angle:110° 
Vertical coverage angle:60° 
Directivity index; Q:9 
System Sensitivity:97 dB 
Nominal Impedance:8 Ω 
Power Handling:400 Watt 
Peak Power Handling:1600 Watt 
Recommended Amplifier:800 
Protections:Dinamyc 
Crossover frequencies:1100 Hz 
TRANSDUCERS
Compression Driver:1.4“(35.5mm) throat, 2.5" (63.7 mm) coil diaphragm assembly 
Nominal Impedence:8 Ω 
Input Power Rating:90 Watt AES 
Sensitivity:110 dB 
Woofer:2x8" (200 mm) woofer with 2.5" (64 mm) coil 
Nominal Impedence:16 Ω 
Input Power Rating:300 Watts AES 
Sensitivity:95 dB 
INPUT SECTION
Input connector:4 pole Amphenol 
CABINET
Cabinet Material:8 mm Polyethylene rotomoulded 
Hardware:4 x M8 + U-bracket and pair of spacers 
Grille:Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing 
Colour:Gray 
PHYSICAL SPECIFICATIONS
Height:268 / 10.55 mm/inch 
Width:566 / 22.28 mm/inch 
Depth:250 / 9.84 mm/inch 
Net Weight:13.5 / 29.7 Kg/Lbs

 

 

Weight10.00 kg27.20 kg12.00 kg8.00 kg9.50 kg15.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 10.00 kg
Weight 27.20 kg
Weight 12.00 kg
Weight 8.00 kg
Weight 9.50 kg
Weight 15.00 kg