| Description | |
- For Live Stage, Theatre, DJ Setups
- Designed for Low-Frequency Extension
- Woofer: 18" with 4" Voice Coil
- Max SPL: 136 dB
- Frequency Range: 30 to 150 Hz (-10 dB)
- Class-D Amplifier: 1600W
- 2 x Combo XLR-1/4" Inputs + XLR Thru/Out
- D-XSUB LF Processing
- Cardioid Mode for Two or More Subs
| | The Thump118S 1400W subwoofer, the flagship of the Thump series, delivers maximum power for modern DJs, bands and clubs. The all-new design features selectable voicing modes that make it easy to tailor the bass to your needs and style. | |
The black SUB 8004-AS Professional Series Active Subwoofer from RCF features a high-power, hypervented 18" woofer with 4" inside/outside voice coils designed to deliver a serious amount of low frequency. Powered by a 2500W digital amplifier module, the SUB 8004-AS can perform in the most demanding situations. The input board includes volume control, deep/punch switch, high-pass switch, phase switch, cardioid, and time delay.
The sub is stackable and lightweight for easy set up and tear down, thanks to the ergonomic handles. A pole receptacle on top and side allows the use of the sub in various configurations. The powder coated front grille integrates a special transparent-to-sound foam backing on the inside to further protect the transducer from dust.
RCF's Class-D power amplifier technology packs huge performance, operating with high efficiency into a lightweight solution. RCF amplifiers deliver an ultrafast attack, realistic transient response, and impressive audio performance. The amplifier features a solid machined aluminium structure, which not only stabilises the amplifier during transportation but also helps the fan-less heat dissipation. All the amplifiers present SMPS power supply section to produce maximum output and minimum weight.
RCF developed advanced transducer technology including the application of high-tech materials such as neodymium, carbon fiber, pure titanium, kevlar, kapton, and mylar hybrids. RCF has been instrumental in technological inventions such as carbon fiber cone molding, double silicon spiders, inside/outside voice coil windings to edge wound voice coil manufacturing and pure titanium diaphragm forming.
RCF subwoofers are the first choice of many sound engineers, thanks to the very high SPL levels at very low frequencies, small dimensions compared to the competitors, self-powered design, internal delay control, cardioid configuration options and impressive size/weight to SPL output ratio.
The RCF cabinets are made of baltic birch plywood coated with a textured black finish. The subs are stackable and lightweight, for easy set up and tear down, thanks to the ergonomic handles. A pole receptacle on top and side allows the use of the box in various configurations. The powder coated front grille integrates a special transparent-to-sound foam backing on the inside to further protect the transducers from dust.
Live sound, rental, portable PA, clubs, ballrooms, live theatres, houses of worship, theme parks, music playback, and sound reinforcement in small- and mid-size venues, and corporate A/V professionals and sound system hire companies
|
| Content | User's manualLD Systems STINGER SUB 18 A G3
Active 18" bass-reflex PA subwoofer
STINGER SUB 18 A G3
Engineered for rock-solid reliability day in, day out this active subwoofer is a truly professional performer. With built-in presets for quick system integration and a variety of cardioid array configurations it is completely user-friendly. The Stinger® SUB 18 A G3 is powered by high efficiency Class D amplification with a giant 800 watts RMS output. It drives a custom designed 18” woofer delivering a huge bottom end with terrific punch and excellent definition. The Stinger® SUB 18 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance and pristine, distortion-free bass reproduction at all times. Designed to be a real workhorse throughout, the well-braced bass reflex enclosure is constructed for horizontal and vertical orientation. It is made of rigid 18 mm birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, M20 threaded pole insert, stacking recesses and ergonomic handles the Stinger® 18 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
- Active 18” bass reflex PA subwoofer
- High-efficiency 800 watts RMS digital power stage and 135 dB max. SPL
- 18” custom design woofer for extended low end down to 35 Hz
- DynX® DSP technology for distortion-free performance
- 80, 100 and 120 Hz low pass presets
- Cardioid subwoofer array presets
- Horizontal or vertical placement
- 18 mm birch ply cabinet with ultra rugged polyurea finish
- Ergonomic handles and stacking recesses for easy transport and setup
- Shock-resistant front grill provides maximum speaker protection
- Insert for M20 threaded poles
- Smart transport accessories
Product type
PA subwoofer
Type
active
Low/mid driver dimensions
18 "
Woofer Size
457.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
4 "
Woofer voice coil (mm)
101.6 mm
Amplifier
Class D
RMS
800 W
Peak power
1600 W
Frequency response
35 - 200 Hz
Max. SPL (peak)
135 dB
Protection circuits
DC , limiter , over voltage , short circuit
Input impedance
30000 Ohm(s)
Input sensitivity
0.3 V
Controls
Main Level , mode
Indicators
limit , mode , on , protect (protection circuit engaged) , signal
Line inputs
2
Line input connectors
6.3 mm Jack , XLR
Line outputs
2
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching) , SMPS
Power Consumption (max.)
600 VA
Operating Temperature
0 - 40 °C
Relative Humidity:
Cabinet material
18 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
vented
Width
677 mm
Height
547 mm
Depth
740 mm
Weight
42,6 kg
| The DXS 18 achieves best in class SPL of up to 136dB and delivers the lowest frequency response (down to 32Hz) in the lineup. Housed in a sturdy band-pass enclosure, the custom built 18” driver with a large 4-inch voice coil and a Class-D amplifier delivers 1020W of power with exceptional clarity and accuracy.
- Powered reflex subwoofer
- Woofer: 18" with 4" voice coil
- Ideal for low-frequency extension to all full-range loudspeakers
- Maximum SPL: 136 dB
- Frequency range (-10 dB): 30 to 150 Hz
- High-power 1600W Class-D amplifier module
- Lightweight yet very durable plywood cabinet with premium grade Polyurea coating
- Optional speaker cover (SPCVR-DXS18X) and wheel kit (SPW-1)
- DXS XLF subwoofers are driven by 96 kHz high-power DSP processors and utilize dynamic EQ
- Onboard D-XSUB LF processing provides total low-frequency management
- Normal mode: Set for ideally balanced low-frequency response
- Boost mode: Provides a tighter and more focused bass with some extra punch
- Xtended LF mode: Drops the low-end frequencies down even further for a large bottom end
- Cardioid mode:
- Works with two or more subwoofers
- Effectively decreases the sound pressure on stage while increasing the bottom-end output directed towards the audience
- Results in a much cleaner stage monitoring environment
- DSP protection functions for maximum output and component longevity
- Active subwoofers ensure the combination of transducer and amplifier are matched and optimized for the best possible performance
- During development, Yamaha measured and tested the durability of each transducer and the overall amplifier output to set optimal limiter points using precise DSP control
- Employing many of the same protection functions used in high-end professional power amplifiers, Yamaha's DSP consistently monitors the status of the power supply, power amplifiers, transducers, and signal levels to protect each component in order to maintain optimum performance while extending component life and usability
PA Speaker
| Configuration |
Active Subwoofer |
| Enclosure Type |
Bass-Reflex Subwoofer |
| Total Power Capacity |
1600 W Peak
1200 W RMS |
| Amplifier Class |
Class-D |
Drivers
| LF Driver |
1 x 18" / 457.2 mm Woofer |
| LF Voice Coil |
4" / 101.6 mm |
| Magnet |
Ferrite |
Performance
| Frequency Range |
30 Hz to 150 Hz -10 dB |
| Maximum SPL |
136 dB |
| Max Input Level |
Line Input:
+24 dBu |
| I/O Impedance |
Input:
20 Kilohms |
Connectivity
| Audio I/O |
2 x Combo XLR-1/4" TRS Female Balanced/Unbalanced Input
2 x XLR 3-Pin Male Balanced Output |
| USB |
1 x USB-A (External Memory, Host Connection) |
Signal Processing
| Maximum Sampling Rate |
96 kHz |
Power
| AC Input Power |
Universal:
100 to 240 VAC, 50 / 60 Hz |
| AC Power I/O |
1 x IEC (Locking) |
| Power Consumption |
40 W (Idle)
180 W (1/8 Power) |
Physical
| Mounting |
1 x 1.4" / 35 mm Pole Socket (Top)
1 x M20 Pole Socket (Top) |
| Handles |
1 x Each Side |
| Cooling |
Fan (Variable Speed) |
| Construction Material |
Plywood |
| Dimensions |
21.7 x 25.9 x 28.3" / 550 x 657 x 720 mm |
| Weight |
107.8 lb / 48.9 kg |
|
Features
- Powered horn-bass subwoofer system
– High output 18″ loudspeaker
– Polarity switch
– Filtered output defeat switch
– Variable 100 -160 Hz high-pass filter
– Gain control
The Avant 118A is a powered rear-loaded horn-bass subwoofer system designed to provide extended bass response for the Avant full-range cabinets.
A 1250 W Class D amplifier drives a D.A.S. 18LX log excursion bass loudspeaker. The 18LX loudspeaker incoporates a 4″ voice coil for high power handling and output.
The Avant 118A incorporates a 1250 W Class D amplifier with switch mode power supply (SMPS) and digital signal processing (DSP).The amplifier has a unique EQ switch which allows the user to select a Deep subbass response or a Loud bass response. The system includes two balanced inputs with stereo filtered output connections for satellite systems. The variable crossover ranges from 100 Hz-160 Hz and can be defeated to offer stereo "loop thru” connections. A gain control and polarity reverse feature increase user control over the system.
Technical Data
| Nominal LF Amplifier Power | 1250 W (Class D) | | Frequency Range (-10 dB) | Loud: 50 Hz – 142 Hz
Deep: 45 Hz -138 Hz | | Rated Peak SPL at 1 m | 136 dB | | Internal Crossover | Variable 100-160 Hz | | Connectors | INPUT: 2 x Female XLR
LOOP THRU: 2 x Male XLR
AC INPUT: PowerCon NAC 3
AC OUTPUT: Powercon NAC 3 | | AC Requirements | 115 V, 50 Hz/60 Hz
230 V, 50 Hz/60 Hz | | Current Draw (1/3 power @ 230 V) | 2.7 A | | Enclosure Material | Birch Plywood | | Color/Finish | Black/Iso-Flex Paint | | Dimensions (H x W x D) | 84 x 60 x 65.5 cm
33 x 23.6 x 25.8 in | | Weight | 55 kg (121 lb) |
| Add bass
One of the best ways to fill the room with bass with your PA system is by adding a subwoofer. Mackie's Thump 118S powered subwoofer was designed to boost the low-frequency power and output of a PA system using their Thump Series powered speakers, but it'll work with any system that needs more bass. This sub features a built-in amplifier that sends up to 1400 watts to the 18" low-frequency driver in an efficient bandpass enclosure, creating plenty of bass energy for just about any musical application or venue. Internal protection circuits keep the sub rockin' and safely under control, even when the party gets loud and raucous.
Integrates well
Selectable High Pass Modes with a variable crossover setting optimizes the sub for different system configurations and musical genres. A 2-channel input mixer plus 2 full-range and 2 high-pass outputs offer plenty of wiring and integration options. Convenient, top corner handles help ease the pain when carrying this Built-Like-A-Tank™ sub to and from a gig.
Product highlights:
- powered PA subwoofer
- 18" woofer in a bandpass enclosure
- built-in amplifier: 1400 watts peak
- maximum SPL: 132 dB
- frequency range: 40-120 Hz
- 4 High Pass Modes: Flat, Deep, Punch, Variable (with control)
- phase switch and output level control
Other features:
- inputs: 2 XLR
- outputs: 4 XLR (2 full-range, 2 high-pass)
- Built-Like-A-Tank™ bandpass enclosure with weather-resistant perforated metal grille
- Integrated M20-threaded pole mount
- dimensions: 20.9" W x 21.25" H x 25.9" D
- weight: 65.5 lbs.
- warranty: 1 year
What's in the box:
- Powered 18" PA subwoofer
- 6' AC Power cord (IEC 3-prong)
- Quickstart guide
|
Info
18" Dual Self-Powered Subwoofer System. Features Amplifier D Class 2000W (peak) of the Crown with DriveCore technology, built-in DSP, V5 tuning compatible with Vertec systems and VTX, HiQnet Network for remote control via IOS and Android devices. Sturdy construction features carrying handles, fixings M10. The built-in DSP contains 20 PEQ's, delay up to 2 sec, tone generator, input mixing, amplifier monitoring and 50 user preset. Additional features Display LCD for quick and easy configuration and setup. Max SPL 141 dB, frequency response 35Hz- 120Hz (-3dB). dimensions 575 x 1205 x 681 (H x W x D), weight 65,9 kg, color black. Ideal for rental companies, sound, DJ sets, permanent installations.
|
| Configuration |
Active Subwoofer |
| Enclosure Type |
Subwoofer |
| Total Power Capacity |
2500 W Peak
1250 W RMS |
| Amplifier Class |
Class-D |
| HF Driver |
None |
| MF Driver |
None |
| LF Driver |
1 x 18" / 45.7 cm Woofer |
| LF Voice Coil |
Dual 4" / 10.2 cm
|
| Frequency Response |
30 Hz to 120 Hz |
| Maximum SPL |
136 dB |
| Input Sensitivity |
-2 dBu (Min)
4 dBu (Max) |
| Protections |
RMS, Thermal |
| Audio I/O |
1 x XLR 3-Pin Female Balanced Line Input
1 x XLR 3-Pin Male Balanced Line Output |
| Network I/O |
None |
| USB |
None |
| Wireless Connectivity |
None |
| EQ |
None |
| Parametric EQ |
None |
| Semi-Parametric EQ |
None |
| Filters |
Low-Pass:
90 Hz / 120 Hz |
| Dynamic Processing |
Fast Limiter |
| Alignment Delay |
None |
| Phase Adjustment |
Yes |
| Digital Signal Processing |
Delay |
| AC Input Power |
Factory Selectable:
100 to 120 VAC, 50 / 60 Hz (T 10 A H 250 V) |
| AC Power Connector |
1 x powerCON Input (Locking)
1 x powerCON Output (Locking) |
| Handles |
1 x Each Side |
| Cooling |
Convection |
| Construction Material |
Plywood |
| Certifications |
CE
*as per Manufacturer |
| Dimensions |
27.6 to 22 x 27.6" / 700 to 558 x 700 mm |
| Weight |
123 lb / 55.8 kg |
|
Reviews
There are no reviews yet.