LD SYSTEMS LDI02-ACTIVE D.I BOX w-BATTERY

58.64 incl. GR VAT

Only 5 left in stock

EAN: 4049521041020
Installments calculation
CompareAdd to wishlist Submit Better Price
User´s Manual LD Systems LDI02 DI Box active Active DI box in a sturdy metal housing (aluminium/steel) with protective corners, silver-blue metallic, internal battery (9 V flashes during operation) is switched off automatically when phantom power is used (LED permanently illuminated), extremely low battery consumption. Battery: 9 V block (not included). Product type DI Boxes […]

 

Read more

pdf User´s Manual

LD Systems LDI02
DI Box active

Active DI box in a sturdy metal housing (aluminium/steel) with protective corners, silver-blue metallic, internal battery (9 V flashes during operation) is switched off automatically when phantom power is used (LED permanently illuminated),

extremely low battery consumption. Battery: 9 V block (not included).

Product type DI Boxes


Channels 1


Inputs 2


Input connectors 6.3 mm Jack , XLR


Max. input level + 10 / + 30 dBu dBu


Input impedance 1 M Ohm(s)


Outputs 1


THRU outputs/channel 1


Output connectors XLR


Frequency response 20 – 20.000 Hz


THD


Indicators Power


Controls ground lift , Power


Operating voltage +48 V phantom power , 9 V block


Cabinet material metal


Cabinet surface painted


Width 135 mm


Depth 128 mm


Height 53 mm


Weight 0,645 kg

Weight 0.70 kg

Reviews

There are no reviews yet.

Be the first to review “LD SYSTEMS LDI02-ACTIVE D.I BOX w-BATTERY”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD SYSTEMS LDI02-ACTIVE D.I BOX w-BATTERY removeSTEWART ADB1 ACTIVE D.I BOX removeDOD AC 275 Active Direct Box with Switchable Ground Lift and Attenuator-2nd Hand- removeBEHRINGER DI100 Ultra DI Box Active Battery/Phantom removePALMER AUDIO PDI09 TOOLS Guitar DI-box removeOMNITRONIC LH-060 2-channel DI box/splitter, passive remove
NameLD SYSTEMS LDI02-ACTIVE D.I BOX w-BATTERY removeSTEWART ADB1 ACTIVE D.I BOX removeDOD AC 275 Active Direct Box with Switchable Ground Lift and Attenuator-2nd Hand- removeBEHRINGER DI100 Ultra DI Box Active Battery/Phantom removePALMER AUDIO PDI09 TOOLS Guitar DI-box removeOMNITRONIC LH-060 2-channel DI box/splitter, passive remove
ImageBEHRINGER DI100 Ultra-Rugged DI Box for Stage and Studio Powered active battery phantom
SKULDI02ADB1E275E005264PDI09LH060
Rating
Price 58.64 incl. GR VAT 164.56 incl. GR VAT 73.93 incl. GR VAT 46.00 incl. GR VAT 100.06 incl. GR VAT 73.35 incl. GR VAT
Stock

Only 5 left in stock

Available on backorder

In stock

In stock (can be backordered)

Available on backorder

Available on backorder

AvailabilityOnly 5 left in stockAvailable on backorderIn stockIn stock (can be backordered)Available on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Professional and multi-purpose direct injection box for stage and studio applications
  • Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
  • Ultra-flat frequency response due to renowned BEHRINGER OT-1 transformer
  • Internal battery automatically shuts off when phantom power is applied
  • Allows direct connection to speaker outputs with up to 3,000 Watts
Contentpdf User´s Manual LD Systems LDI02 DI Box active Active DI box in a sturdy metal housing (aluminium/steel) with protective corners, silver-blue metallic, internal battery (9 V flashes during operation) is switched off automatically when phantom power is used (LED permanently illuminated), extremely low battery consumption. Battery: 9 V block (not included). Product type DI Boxes
Channels 1
Inputs 2
Input connectors 6.3 mm Jack , XLR
Max. input level + 10 / + 30 dBu dBu
Input impedance 1 M Ohm(s)
Outputs 1
THRU outputs/channel 1
Output connectors XLR
Frequency response 20 - 20.000 Hz
THD
Indicators Power
Controls ground lift , Power
Operating voltage +48 V phantom power , 9 V block
Cabinet material metal
Cabinet surface painted
Width 135 mm
Depth 128 mm
Height 53 mm
Weight 0,645 kg

The Stewart ADB-1 is a single channel active direct box that allows an unbalanced source to
directly feed a balanced input. Musical instruments, tape recorders, VCRs and sound projectors
can be run "direct" to the mixing console, avoiding unnecessary degradation of sound quality.
The ADB-1 operates on either phantom power or a 9-volt battery.

FEATURES:
Flat response
Low distortion
Low noise
Wide dynamic range
No transformer
RF protection on input and output
Switchable ground isolation
Flush mounted slide switches

DOD AC 275 Active Direct Box with Switchable Ground Lift and Attenuator-2nd Hand-

The AC 275 is an active, phantom powered direct box. Unlike a passive DI where the frequency response of the signal can be altered depending on the connected impedance, an active DI buffers the input signal with an amplifier. This assures that the sound source will reach the mixer balanced and noise-free.

Housed in a cast alloy chassis, the AC 275 supplies two, high impedance, unbalanced 1/4" jacks and one low impedance balanced XLR jack. It operates with battery or phantom power.


Key Features
?

Active direct box

?

Allows a hi impedance unbalanced source to directly feed a low impedance balanced input

?

Flat frequency response

?

Connects guitar pickups, microphones or electric instruments to a recording or P.A. console without audio quality loss

?

Internal pad for speaker level input

?

Operates with battery or phantom power

?

Ground lift switch eliminates typical ground loop problems

?

Rugged, road-proof cast alloy chassis

Product Features: Professional and multi-purpose direct injection box for stage and studio applications Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers Ultra-flat frequency response due to renowned BEHRINGER OT-1 transformer Internal battery automatically shuts off when phantom power is applied Allows direct connection to speaker outputs with up to 3,000 Watts Switchable input attenuation allows input levels of up to +50 dB Ground Lift switch eliminates typical ground loop problems ¼" TRS and gold-plated XLR connectors Ultra-rugged, road-suitable aluminum case Stackable oversized rubber corners High-quality components and exceptionally rugged construction ensure long life and durability Conceived and designed by BEHRINGER Germany   With the DI100, you can rest assured that your sound source will reach the console balanced and noise-free. BEHRINGER's take on the all-important active DI box gives you functionality, durability and incredible sound at a remarkable price.
Be Direct
Plug into the DI100's balanced 1/4" TRS or XLR input, then send a signal to your console via the balanced XLR output. You can even plug your guitar or bass amp's speaker output into the DI100, which can handle ratings of up to 3,000 Watts and still deliver a perfect signal. It also features a 1/4" LINK jack to send your signal to an on-stage amplifier. The DI100 also has a switchable attenuation pad, allowing input levels of up to +50 dB. There is also a ground lift switch to eliminate noise associated with ground loops. The DI100 also features BEHRINGER's renowned OT-1 output transformer.
Superior Sound, Incredible Value
DI boxes are an essential part of any stage or studio, and the DI100 delivers the exceptional sound you expect, wrapped up in a rugged, road-proof aluminum case with stackable rubber corners.

Passive DI box especially designed for guitars.

The PDI09 can be connected between an effect device or amplifier and the mixing console. The PDI09 is not suitable for direct connection to a guitar. Integrated filter circuits simulate the authentic "speaker" sound. Tone can be varied between "Mellow“, "Normal“, or "Bright“.

Technical specifications:

  • Input: 6.3 mm jack with parallel "THRU" socket
  • Output: male XLR transformer balanced
  • Attenuator: (Level switch) 0 dB for line signals, -15 dB for small amps up to 10 w, 30 dB for large amps up to 200 w
  • No battery necessary

2-channel DI box/splitter, passive Converts 2 separate unbalanced line inputs (e.g. instruments) into 2 balanced XLR outputs for connecting a mixer Switchable to split mode (input 1 routes the signal to both outputs) Switchable input attenuation: 0 dB, -20 dB, -40 dB Ground-lift switch eliminates ground loop problems 2 signal inputs via XLR/jack combo connectors 2 low-impedance XLR outputs Modern convex housing design Full rubber housing corners for safe operation Cables can be routed under the housing

Weight0.70 kg0.50 kg2.50 kg0.65 kg0.29 kg0.70 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.70 kg
Weight 0.50 kg
Weight 2.50 kg
Weight 0.65 kg
Weight 0.29 kg
Weight 0.70 kg