LD Systems LDMEIONE3 MEIONE Series – In-Ear Monitoring System wireless 864,900 MHz

Discontinued

203.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
 Use’s manual [3,48 MB]  Battery disposal information [77,1 KB] LD Systems MEI ONE – The perfect In-Ear Monitoring Starter Set The MEI ONE extends our range of In-Ear systems with a set at an amazing low price. Now really everyone can afford the comfort of an In-Ear Monitoring system. The MEI ONE is available in 3 different […]

 

Read more

 Use’s manual [3,48 MB]
 Battery disposal information [77,1 KB]
LD Systems MEI ONE – The perfect In-Ear Monitoring Starter Set

The MEI ONE extends our range of In-Ear systems with a set at an amazing low price. Now really everyone can afford the comfort of an In-Ear Monitoring system. The MEI ONE is available in 3 different fixed frequencies, which can operate simultaneously and free of interference. It couldn’t be easier! You may also use one transmitter with an unlimited number of belt pack receivers – the whole band hears the same!

An LD Systems MEI ONE System is composed of:

  • One 9.5″ transmitter with 2 x XLR / 6.3 mm Jack (combo) inputs and level controls, level meter left / right, mono / stereo switch, adjustable headphone control, and detachable antenna
  • One belt pack receiver with belt clip, adjustable 3.5 mm headphone control, RF receiver LED, antenna and battery compartment for 2 AA batteries
  • Accessories included: stereo In-Ear phones, AC adapter, 19″ rack-mounts and carrying case

 

Specifications MEI ONE Transmitter:

  • Fixed Frequencies:
    • LDMEIONE1T: 863.700 MHz
    • LDMEIONE2T: 864.100 MHz
    • LDMEIONE3T: 864.900 MHz
  • RF output power: 10 dBm
  • Gain adjustment range: + 40 dB
  • Max. audio input level: + 6 dBV
  • Front panel controls: Power On / Off, Headphones Level
  • Rear panel controls: Input Level Left / Right, Mono / Stereo Switch
  • Input: 2 x XLR / 6.3 mm Jack (combo)
  • Power requirement: 12 – 18 V DC, 300 mA External Power Supply
  • Operating temperature: -10°C to +50°C
  • Dimensions (W x H x D): 212 x 38 x 96 mm

Specifications MEI ONE Beltpack Receiver:

  • Fixed Frequencies:
    • LDMEIONE1BP: 863.700 MHz
    • LDMEIONE2BP: 864.100 MHz
    • LDMEIONE3BP: 864.900 MHz
  • Audio Output Level: 100 mW
  • Audio Response: 80 – 16.000 Hz
  • THD:
  • Power Requirement: 2 AA Size Alkaline or Rechargeable Batteries
  • Battery Life: > 5 Hours (depending on battery type)
  • Dimensions (W x H x D): 95 x 65 x 25 mm

 

Weight 2.60 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems LDMEIONE3 MEIONE Series – In-Ear Monitoring System wireless 864,900 MHz”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems LDMEIONE3 MEIONE Series - In-Ear Monitoring System wireless 864,900 MHz removeLD Systems MEI 100 G2 B 6 - In-Ear Monitoring System wireless band 6 655 - 679 MHz removeSENNHEISER EW-IEM-G4-TWIN-B In Ear Monitoring Set removeLD Systems LDU306IEM Wireless In-Ear Monitoring System 655-679 MHz IEM removeLD Systems MEI 100 G2 B 5 - In-Ear Monitoring System wireless band 5 584 - 607 MHz removeAudio Technica M3 Wireless in-ear monitor system remove
NameLD Systems LDMEIONE3 MEIONE Series - In-Ear Monitoring System wireless 864,900 MHz removeLD Systems MEI 100 G2 B 6 - In-Ear Monitoring System wireless band 6 655 - 679 MHz removeSENNHEISER EW-IEM-G4-TWIN-B In Ear Monitoring Set removeLD Systems LDU306IEM Wireless In-Ear Monitoring System 655-679 MHz IEM removeLD Systems MEI 100 G2 B 5 - In-Ear Monitoring System wireless band 5 584 - 607 MHz removeAudio Technica M3 Wireless in-ear monitor system remove
Image
SKULDMEIONE3LDMEI100G2B6H12SE00605LDU306IEMLDMEI100G2B5M3 INEAR
Rating
Price 203.00 incl. GR VAT 279.00 incl. GR VAT 1,399.00 incl. GR VAT 256.00 incl. GR VAT 279.00 incl. GR VAT 826.00 incl. GR VAT
Stock

In stock

Only 3 left in stock (can be backordered)

Available on backorder

Available on backorder

Only 2 left in stock (can be backordered)

Available on backorder

AvailabilityIn stockOnly 3 left in stock (can be backordered)Available on backorderAvailable on backorderOnly 2 left in stock (can be backordered)Available on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
 Use's manual [3,48 MB]
 Battery disposal information [77,1 KB]

LD Systems MEI ONE - The perfect In-Ear Monitoring Starter Set

The MEI ONE extends our range of In-Ear systems with a set at an amazing low price. Now really everyone can afford the comfort of an In-Ear Monitoring system. The MEI ONE is available in 3 different fixed frequencies, which can operate simultaneously and free of interference. It couldn't be easier! You may also use one transmitter with an unlimited number of belt pack receivers - the whole band hears the same!

An LD Systems MEI ONE System is composed of:

  • One 9.5" transmitter with 2 x XLR / 6.3 mm Jack (combo) inputs and level controls, level meter left / right, mono / stereo switch, adjustable headphone control, and detachable antenna
  • One belt pack receiver with belt clip, adjustable 3.5 mm headphone control, RF receiver LED, antenna and battery compartment for 2 AA batteries
  • Accessories included: stereo In-Ear phones, AC adapter, 19" rack-mounts and carrying case

 

Specifications MEI ONE Transmitter:

  • Fixed Frequencies:
    • LDMEIONE1T: 863.700 MHz
    • LDMEIONE2T: 864.100 MHz
    • LDMEIONE3T: 864.900 MHz
  • RF output power: 10 dBm
  • Gain adjustment range: + 40 dB
  • Max. audio input level: + 6 dBV
  • Front panel controls: Power On / Off, Headphones Level
  • Rear panel controls: Input Level Left / Right, Mono / Stereo Switch
  • Input: 2 x XLR / 6.3 mm Jack (combo)
  • Power requirement: 12 - 18 V DC, 300 mA External Power Supply
  • Operating temperature: -10°C to +50°C
  • Dimensions (W x H x D): 212 x 38 x 96 mm

Specifications MEI ONE Beltpack Receiver:

  • Fixed Frequencies:
    • LDMEIONE1BP: 863.700 MHz
    • LDMEIONE2BP: 864.100 MHz
    • LDMEIONE3BP: 864.900 MHz
  • Audio Output Level: 100 mW
  • Audio Response: 80 - 16.000 Hz
  • THD:
  • Power Requirement: 2 AA Size Alkaline or Rechargeable Batteries
  • Battery Life: > 5 Hours (depending on battery type)
  • Dimensions (W x H x D): 95 x 65 x 25 mm


 

The new LD Systems MEI 100 G2 B 6 In-Ear Monitoring-System with 96 UHF channels offers outstanding sound quality and a large dynamic range in the 655 – 679 MHz band. The system toggles between mono and stereo mode for perfect monitoring for live musicians, actors or speakers. A built-in limiter ensures even, distortion-free sound reproduction with a frequency response of 80Hz - 15 kHz and stands out because of its high signal-to-noise ratio and low total harmonic distortion. The LD MEI 100 G2 permits simultaneous operation of up to 5 systems. Both transmitter and receiver feature multifunctional displays that show all important system information. With high quality batteries, it is possible to attain running times of 10 hours and more. The MEI 100 G2 package includes high-quality earphones, a 19" rackmount kit, and a rugged transport box made of ABS plastic. Product type In-ear Monitoring
Transmission frequency range 655 - 679 MHz
LDMEI100G2BPRB6 - LD Systems MEI 100 G2 BPR B 6 Receiver for LDMEI100G2 In-Ear Monitoring System band 6
Product type In-ear Monitoring Accessories
Type Receivers
Channels 96 (8 groups of 12 channels)
Transmission method FM, stereo
Frequency response 80 - 15000 Hz
THD 0.25 %
Audio output 3.5 mm TRS
Max. audio output level 100 mW
Indicators RF (LED)
Operating time > 10 hrs.
Controls volume
Operating voltage 2 x 1.5 V AA
Features incl. batteries
Width 65 mm
Height 95 mm
Depth 25 mm
Weight 0,1 kg
LDMEI100G2TB6 - LD Systems MEI 100 G2 T B 6 Transmitter for LDMEI100G2 In-Ear Monitoring System band 6 655 - 679 MHz
Type Transmitters
Modes of operation mono/stereo
Rated HF output power 10 mW
Inputs 2
Input connectors XLR
Input impedance (kOhms) 8.5 kOhm
Antenna connector BNC
Controls volume headphone
Operating voltage 12 - 18 V DC
Width 212 mm
Height 38 mm
Depth 90 mm
Weight 1,1 kg
Accessories (included) Power supply
Double Wireless In Ear Monitor Set (628.000-668.000 MHz) Features
  • Engineered for professional live sound: Rugged all-in-one wireless monitoring system for in-ear applications.
  • Robust bodypack receiver and reliable in-ear monitoring IE 4 headphones delivering clarity along the whole frequency spectrum for daily use on stage
  • Half-rack stereo transmitter in a full-metal housing with OLED display for full control
  • Easy and flexible wireless synchronization between transmitter and receiver via infrared
  • Compatible with Sennheiser WSM control software for flexible frequency allocation
  • Up to 16 compatible channels
  • Up to 42 MHz bandwidth with 1680 selectable frequencies, fully tunable in a stable UHF range
  • Transmission Range: up to 100 meters / 300 feet
  • High RF output power (up to 30 mW) depending on country regulations
SR IEM G4
  • Dimensions Approx. 202 x 212 x 43 mm
  • Compander Sennheiser HDX
  • THD, total harmonic distortion 90 dB
  • RF output power switchable: Low: typ. 10 mW, Standard: typ. 30 mW, High: typ. 50 mW
  • Switching bandwidth up to 42 MHz
  • Peak deviation ±48 kHz
  • Nominal deviation ±24 kHz
  • Modulation Wideband FM stereo (MPX pilot tone)
  • Power supply 12 V DC
  • Current consumption max. 350 mA
  • Max. Input voltage +22 dBu
  • Transmission frequency Max. 1680 frequencies, adjustable in 25 kHz steps, 20 frequency banks, each with up to 16 factory-preset channels, no intermodulation, 6 frequency banks with up to 16 programmable channels
  • AF frequency response 25 Hz to 15 kHz
  • Temperature Range -10 °C to +55 °C
  • Frequency stability ±10 ppm
  • Antenna Output BNC socket, 50 Ω
EK IEM G4
  • Dimensions Approx. 82 x 64 x 24 mm
  • Compander Sennheiser HDX
  • THD, total harmonic distortion ≤ 0.9 %
  • Weight (incl. batteries) approx. 125 g
  • Signal-to-noise ratio approx. 90 dBA
  • Switching bandwidth up to 42 MHz
  • Peak deviation ±48 kHz
  • Nominal deviation ±24 kHz
  • Operating time approx. 4 to 6 hours (depending on volume level)
  • Modulation Wideband FM
  • Power supply 2 AA batteries, 1.5 V or BA 2015 accupack
  • Current consumption at nominal voltage: approx. 140 mA
  • with transmitter switched off: ≤ 25 µA
  • Adjacent channel rejection Typically ≥ 65 dB
  • Audio-Output-Power 2 x 100 mW at 32 Ω
  • Intermodulation attenuation Typically ≥ 70 dB
  • Limiter –18 dB to –6 dB, adjustable in steps of 6 dB, can be switched off
  • Powering 3 V battery / 2.4 V rechargeable battery
  • Receiving frequency Max. 1680 frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 16 factory-preset channels, no intermodulation 6 frequency banks with up to 16 programmable channels
  • RF sensitivity < 4 μV, typ. 1.6 μV for 52 dBA rms S/N
  • Squelch 5 to 25 dBµV, adjustable in steps of 2 dB
  • Bass Boost +8 dB at 80 kHz
  • Temperature Range -10 °C to +55 °C
  • Receiver Principle Adaptive diversity
  • Blocking ≥ 80 dB
EK IEM G4
  • Dimensions Approx. 82 x 64 x 24 mm
  • Compander Sennheiser HDX
  • THD, total harmonic distortion ≤ 0.9 %
What's in the box?
  • SR IEM G4 stereo transmitter
  • 2 EK IEM G4 stereo receiver
  • 2 IE 4 earphones
  • 4 AA batteries
  • rod antenna
  • GA 3 rackmount set
User´s Manual Countries frequency list Device frequency list LD Systems U306 IEM In-Ear Monitoring-System - 655 - 679 MHz
  • Reliable wireless transmission with a range of up to 100 m
  • Low-reaching frequency response
  • 12 selectable channels
  • Choice of stereo or mono mode
  • Up to 6 systems can be used simultaneously
  • 10-hour bodypack operating time with two AA batteries
  • Unlimited number of bodypacks can be set to the same transmission frequency
  • Channel and RF reception displayed on bodypack
  • Transmitter in rugged metal casing with stereo level display
  • Removable antenna with BNC connection
  • 19" rack assembly kit included.
  • Package is not included headphones.
We have developed the wireless U300® in-ear monitoring systems for unlimited freedom of movement on the stage with perfect in-ear monitor sound at all times. Developed in Germany, their clear, modern design and straightforward operation make them the perfect choice – not just for beginners. Their reliable range of up to 100 m and their low-reaching frequency band of 50 Hz to 16 kHz ensure professional performance. U300® in-ear sets are available for operation in 5 frequency bands: 584 MHz - 608 MHz, 655 MHz - 679 MHz, 823 MHz - 832 MHz+ 863 MHz - 865 MHz, 470 MHz - 490 MHz or 514 MHz - 542 MHz. Six systems can be used simultaneously in each case. The U300® in-ear transmitters offer a choice of 12 transmission channels and an RF transmission power of 10 mW. They can also be operated in mono or stereo mode. Combo sockets serve as symmetrical XLR and asymmetrical 6.35 mm jack inputs. Left and right input levels can be controlled separately, while two LED chains indicate audio signal strength. The U300® bodypack receiver has a mini jack socket to connect the earphones as well as displays for channel, stereo mode and low battery status. Running on two AA batteries, it has an operating time of 10 hours. A practical controller allows individual adjustment of the monitoring volume during performance. 19" rack assembly kit included. Product type In-ear Monitoring
Type Set
Transmission frequency range 655 - 679 MHz
Weight 1,51 kg
LDU306IEMT - LD Systems U306 IEM T Transmitter
Product type In-ear Monitoring Accessories
Type Transmitters
Channels 12
Modes of operation mono/stereo
Transmission method FM, mono/stereo
Rated HF output power 10 mW
Total Harmonic Distortion (THD)
LD Systems MEI100G2 B 5 The LD Systems MEI 100 G2 B 5 is an advanced 96 channel UHF in-ear monitoring system delivering outstanding sound with extended dynamics in the 584 - 607 MHZ band. Switchable mono and stereo modes select the perfect monitoring setting for live music, theatre and voice applications while an input limiter has been integrated for consistent, distortion-free sound reproduction from 80Hz - 15 kHz with a high S/N ratio and low THD. The LD MEI 100 G2 allows the use of up to 5 systems simultaneously. Both transmitter and receiver feature multifunction displays providing all the important system data. Operation time exceeds 10h with high quality batteries. The MEI 100 G2 package includes high quality earphones, a 19” rackmount kit and a rugged ABS plastic carrying case.  
  • Model name: LDMEI100G2BPRB5
  • Product type: Belt pack receiver
  • Radio frequency range: 584 - 607 MHz
  • Channels: 96 (8 groups of 12 channels)
  • Transmission method: FM, stereo
  • Frequency response: 80 Hz - 15 kHz ± 3 dB
  • Audio outputs: 3.5 mm jack
  • Max. audio output level: 100 mW
  • Controls: Up, Down, Set, Volume
  • Indicators: LC display, RF (LED)
  • Power supply: 2 x 1.5 V AA
  • Operating time: > 10 hrs.
  • Width: 65 mm
  • Height: 95 mm
  • Depth: 25 mm
  • Model name: LDMEI100G2TB5
  • Product type: Transmitter
  • Radio frequency range: 584 - 607 MHz
  • Channels: 96 (8 groups of 12 channels)
  • Transmission method: FM, stereo
  • RF output: 10 mW
  • Frequency response: 80 Hz - 15 kHz ± 3 dB
  • Inputs: 2
  • Input connections: XLR/ 6.3 mm jack (combo)
  • Input impedance: 8,5 kOhm
  • Antenna connector: TNC
  • Controls: up, down, set, power, volume headphone, mono/stereo, AF level (left/right)
  • Indicators: LC display
  • Power supply: 12 - 18 V DC
  • Width: 212 mm
  • Height: 38 mm
  • Depth: 90 mm
  • Accessories (included): Antenna, power supply, headphones, 19" Rackmount Kit

 M3 IEM Brochure 989 KB

 M3 Owners Manual 6.24 MB

 M3 License Options 403 KB

 M3 Declaration of Conformity 221 KB

 Audio-Technica's advanced M3 IEM system offers a full range of professional in-ear monitoring features, with a choice of 1321 UHF channels and easy-to-read LCD information displays on both transmitter and receiver for setting preferences. The stereo monitor system is equipped with Audio-Technica's versatile Personal Mix Control, which gives allows volume and mix control of two independent signals on stage, via controls on the M3R stereo body-pack receiver. While up to 16 complete M3 systems may be used simultaneously, any number of M3R stereo receivers can operate on the same frequency with a single M3T stereo transmitter. The M3T Stereo Transmitter is equipped with two XLR/¼" combo input connectors into which users can connect line-level inputs (from a mixing console, for example). The M3T also offers a headphone output that allows you to monitor transmitter input signals directly.

M3 Components
EP3 Headphones
In-ear dynamic headphones offer high-fidelity sound and excellent isolation
M3T Stereo Transmitter
Wireless UHF transmitter (frequency-agile) offers LCD display and 1321 user-selectable frequencies
M3R Stereo Receiver
Personal Mix Control in a lightweight body-pack with backlit LCD display

 

  • High-fidelity sound with clean, articulate mix allows performers to hear themselves clearly at lower volume
  • 1321 selectable UHF channels with automatic frequency scanning
  • Up to 16 simultaneous systems per frequency band
  • Three receiver modes: Personal Mix, stereo, and mono
  • Personal Mix Control allows volume and mix control of two independent signals at the receiver
  • LCD information display offers step-through menus for setting preferences
  • XLR loop output (true pass-through) connects signal to mixing console, additional IEM system or recording device with no signal degradation
  • Adjustable squelch eliminates annoying static
  • Pilot tone protects against RF interference when transmitter is turned off
  • Multi-level limiter (defeatable) helps protect hearing from sudden peaks
  • Portable system is quick to load and set up
  • Reduces on-stage audio clutter for better overall mix & less feedback
  • Use any number of Stereo Receivers (with individual mixes) on the same frequency
  • Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation
  • Personal fit with 3 sizes of rubber eartips plus an ear-conforming foam tip
  • Selectable auxiliary input offers connection point for ambient microphone, click track, or other mic- or line-level input

 

Overall Specifications
  • Operating Frequencies: Band E: 790.000 to 822.000 MHz, 1281 frequencies
    Band F: 832.000 to 865.000 MHz, 1282 frequencies
    Band L: 575.000 to 608.000 MHz, 1321 frequencies
    Band M: 614.000 to 647.000 MHz, 1321 frequencies
    Not all frequency bands available in all areas. Please check with local regulations.
  • Minimum Frequency Step: 25 kHz
  • Modulation Mode: FM stereo
  • Maximum Deviation: ±40 kHz
  • Dynamic Range: 90 dB (typical), A-weighted
  • Total Harmonic Distortion:
Weight2.60 kg2.00 kg1 kg2.50 kg2.00 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.60 kg
Weight 2.00 kg
Weight 1 kg
Weight 2.50 kg
Weight 2.00 kg
Weight 1.00 kg