Content |
Use's manual [3,48 MB]
Battery disposal information [77,1 KB]
|
|
| LD Systems MEI ONE - The perfect In-Ear Monitoring Starter Set
The MEI ONE extends our range of In-Ear systems with a set at an amazing low price. Now really everyone can afford the comfort of an In-Ear Monitoring system. The MEI ONE is available in 3 different fixed frequencies, which can operate simultaneously and free of interference. It couldn't be easier! You may also use one transmitter with an unlimited number of belt pack receivers - the whole band hears the same!
An LD Systems MEI ONE System is composed of:
- One 9.5" transmitter with 2 x XLR / 6.3 mm Jack (combo) inputs and level controls, level meter left / right, mono / stereo switch, adjustable headphone control, and detachable antenna
- One belt pack receiver with belt clip, adjustable 3.5 mm headphone control, RF receiver LED, antenna and battery compartment for 2 AA batteries
- Accessories included: stereo In-Ear phones, AC adapter, 19" rack-mounts and carrying case
|
Specifications MEI ONE Transmitter:
- Fixed Frequencies:
- LDMEIONE1T: 863.700 MHz
- LDMEIONE2T: 864.100 MHz
- LDMEIONE3T: 864.900 MHz
- RF output power: 10 dBm
- Gain adjustment range: + 40 dB
- Max. audio input level: + 6 dBV
- Front panel controls: Power On / Off, Headphones Level
- Rear panel controls: Input Level Left / Right, Mono / Stereo Switch
- Input: 2 x XLR / 6.3 mm Jack (combo)
- Power requirement: 12 - 18 V DC, 300 mA External Power Supply
- Operating temperature: -10°C to +50°C
- Dimensions (W x H x D): 212 x 38 x 96 mm
Specifications MEI ONE Beltpack Receiver:
- Fixed Frequencies:
- LDMEIONE1BP: 863.700 MHz
- LDMEIONE2BP: 864.100 MHz
- LDMEIONE3BP: 864.900 MHz
- Audio Output Level: 100 mW
- Audio Response: 80 - 16.000 Hz
- THD:
- Power Requirement: 2 AA Size Alkaline or Rechargeable Batteries
- Battery Life: > 5 Hours (depending on battery type)
- Dimensions (W x H x D): 95 x 65 x 25 mm
| The new LD Systems MEI 1000 G2 B 5 is a In-Ear Monitoring-System with 96 UHF channels that delivers outstanding sound quality with a large dynamic range and outstanding crosstalk behaviour in the 584 - 608 Mhz frequency band.
Switchable mono, stereo, and focus monitoring modes as well as adjustable EQ and limiter functions permit natural sound reproduction for any application, with a frequency response of 60 Hz – 16 kHz, a high S/N ratio, and low THD. The LD MEI 1000 G2 permits simultaneous operation of up to 5 systems.
The earphones are very comfortable to wear, and the multifunctional display on the receiver shows all relevant system information. With high quality batteries, it is possible to attain operating times of 12 hours and more. A 19" rackmount kit and a rugged ABS plastic carrying case complete the MEI 1000 G2 package.
Product type
In-ear Monitoring
Transmission frequency range
584 - 607 MHz
LDMEI1000G2BPRB5 - LD Systems MEI 1000 G2 BPR B 5 Receiver for LDMEI1000G2 In-Ear Monitoring System band 5 584 - 607 MHz
Product type
In-ear Monitoring Accessories
Type
Receivers
Channels
2 x 96 (8 groups of 12 channels)
Transmission method
FM, stereo
Frequency response
60 - 16000 Hz
THD
< 1 %
Signal-to-noise ratio
80 dB
Audio output
3.5 mm TRS
Max. audio output level
100 mW
Indicators
LC display , low battery , Power
Operating time
> 12 hrs., battery-dependent
Controls
Down , Escape , Set , Up , volume
Operating voltage
2 x 1.5 V AA
Width
65 mm
Features
incl. batteries
Height
90 mm
Depth
24 mm
Weight
0,1 kg
LDMEI1000G2TB5 - LD Systems MEI 1000 G2 T B 5 Transmitter for LDMEI1000G2 In-Ear Monitoring System band 5 584 - 607 MHz
Type
Transmitters
Channels
96 (8 groups of 12 channels)
Rated HF output power
10 mW
Signal-to-noise ratio
85 dB
Inputs
2
Input connectors
6.3 mm jack , XLR
Input impedance (kOhms)
14 kOhm
Antenna connector
BNC
Controls
input level , pad , Power , volume headphone
Operating voltage
12 - 18 V DC
Width
200 mm
Height
44 mm
Depth
96 mm
Weight
1,116 kg
Accessories (included)
Antenna , Power supply | |
Move freely on stage while the perfect monitor mix is delivered directly to your ears: the amazing performance and reliability of the U500® In-Ear Monitoring Systems will surpass your expectations for certain. Designed with the pro user in mind, they feature advanced technology, contemporary looks and straightforward operation.
U500® In-Ear Systems provide a selection of 96 channels and 2, 10 or 30 mW RF output power for a transmission range greater than 100 m. For quick and trouble-free setup, they allow for convenient infrared synchronisation of transmitter and receiver. U500® In-Ears sport high-contrast OLED displays and allow for individual user name assignment. In addition, you can save 10 custom presets.
To deliver pristine, precise audio U500® In-Ear Monitoring Systems include a 3-band EQ with parametric mids, a switchable limiter and a squelch circuit. They offer a choice of stereo or mono operation and a direct monitoring headphone output at the transmitter. They offer a choice of stereo or mono operation and a direct monitoring headphone output at the transmitter. With a signal-to-noise ratio greater than 95 dB and less than 0,3% THD, the U500® In-Ear's noise floor is exceptionally low.
Drawing little current only, the U500® Bodypack Receiver operates up to 10 hours on two AA batteries. A volume control allows convenient in-performance monitoring level adjustment. Three selectable squelch levels ensure optimum performance at all times.
U500® In-Ear Monitoring Systems are available for operation in five frequency ranges. The 470 - 490 MHz, 514 - 542 MHz, 584 - 608 MHz and 655 - 679 MHz bands permit running up to 12 systems simultaneously. In the 823 - 832 MHz + 863 - 865 MHz range six systems can be operated at the same time providing wireless monitoring for your entire band.
Product type
In-ear Monitoring
LDIEHP2 - LD Systems IE HP 2 Professional In-Ear Headphones
Type
Stereo-In-Ear Headphones
Converter principle
Dynamic
Frequency response
20 - 18000 Hz
Connection type
3.5 mm TRS
Accessories (included)
3 pairs of foam earpieces , 3 pairs of silicone earpieces , Transport case
LDU506IEMR - LD Systems U506 IEM R Receiver
Product type
In-ear Monitoring Accessories
Transmission frequency range
655 - 679 MHz
Transmission method
FM, mono/stereo
Frequency response
40 - 16000 Hz
Max. audio output level
33 mW @ 16 Ohm mW , 80 mW @ 33 Ohm mW
Indicators
Multifunctional OLED-Display , RF (LED)
Operating time
< 10 hours
Antenna connector
Fixed to housing
Controls
Down , On / Off , Up , volume
Operating voltage
2 x 1.5 V AA
Features
battery status LED
Accessories (included)
2 x AA batteries , Antenna
LDU506IEMT - LD Systems U506 IEM T Transmitter
Modes of operation
focus/mono/stereo
Rated HF output power
Variable (2mW, 10mW, 30mW)
Signal-to-noise ratio
93 dB
Total Harmonic Distortion (THD)
0.3 %
Input connectors
Combo TRS 6.3 mm , XLR (balanced)
Input impedance (kOhms)
12 kOhm
Controls
Menu selector Button , Power On/Off , volume headphones
Operating voltage
12 - 18 V DC
Accessories (included)
19" Rack mount kit , BNC-Antenna , power adapter
| LD Systems U506 IEM In-Ear Monitoring System 655 - 679 MHz
Product type Type Transmission frequency range Weight Product type Type Channels Modes of operation Transmission method Rated HF output power Frequency response Signal-to-noise ratio Total Harmonic Distortion (THD) Dynamic range Antenna connector Inputs Controls Input connectors Input impedance (kOhms) Indicators Operating voltage Width Height Depth Weight Accessories (included) Receivers
3.5 mm TRS
33 mW @ 16 Ohm mW , 80 mW @ 33 Ohm mW
Fixed to housing
Down , On / Off , Up , volume
RF (LED)
2 x 1.5 V AA
64 mm
100 mm
24 mm
0,095 kg
2 x AA batteries , Antenna
battery status LED |
- Wireless in-ear monitor system with unique signal processing capabilities for live applications and professional installations
The IVM 4 is the first system ever to combine all the features required for professional in-ear monitoring in a single, compact device. The IVM 4 allows the input signal to be processed individually to meet the requirements of both the artist and the sound system environment.
Unique integrated signal processing for a natural listening experience and a complete set of inputs and outputs make the IVM 4 an ideal tool for professional applications.
1 SST 4 stereo transmitter
1 SPR 4 bodypack stereo receiver
1 pair IP 2 earphones
1 rod antenna 1 rack mounting kit 2 AA size batteries 12-pc. color code set 1 AC adapter |
Reviews
There are no reviews yet.