Content |
LD Systems PRO Series - 8" active PA Speaker
The LD Systems LDP82A is an active bass reflex multifunctional loudspeaker equipped with an 8" speaker and a 1" compression driver.
This loudspeaker was designed for live applications, both as a full-range solution as well as in combination with a subwoofer. The bi-amp amplifier section delivers an output of 600 W Peak and a sound pressure level of 112 dB (max.). This light loudspeaker impresses with assertive treble and midrange. The rear panel offers numerous connections and controls: a microphone input (XLR/jack), a line-in connector (RCA/XLR), a line-out connector (XLR/jack), 2-band EQ and a ground lift switch.
Additional highlights are the integral protective circuitry, built-in handles and rigging points, the 36 mm stand mount and the rugged overall design. Optional wall-mount brackets and monitor supports are available. The perfect PA solution for bands, mobile discos or permanent installation in medium-sized clubs and other function rooms.
Specifications 8" Multifunctional Loudspeaker Active: - Model Name: LDP82A
- Type: Bass Reflex
- Components:
- Woofer: 8" Custom Made
- Compression Driver: 1" Custom Made
- Amplification: Class A / B (Bi-Amp)
- Dispersion: 90° x 40°
- Power (RMS): 150 W
- Power (Peak): 600 W
- Frequency Range: 80 Hz - 15 kHz
- SPL (1 W / 1 m): 92 dB
- Max SPL: 112 dB
- Protection: Over-current
- Controls: Volume, Gain, Mic. Gain, High, Low, On/Off Switch, Ground Lift
- Indicators: Power, Clip
- Connectors:
- Input: Mic: XLR + Jack 6,3 mm Line: XLR + RCA Phono
- Output: Line: XLR + Jack 6,3 mm
- Power Supply: Transformer
- Cabinet Material: PP
- Dimensions (W x H x D): 295 x 420 x 235 mm
- Additional features: M8 rigging points, Stand support (36 mm)
User's manual [2,48 MB] | Features
- Compact and powerful performance
- 1000 Watt peak power Class-D amplifier module
- Easily selected contours for commonly-used applications
- Advanced DSP with Intrinsic Correction™ for superior sound quality and speaker protection
- Directivity Matched Transition™ (DMT) for consistent frequency response across the entire coverage area
- Light weight and highly portable
- Professional appearance looks great in any application
- Use for main PA, stage monitor, or instrument amplifier
- 35 mm pole socket
- Optional yoke, tote, and outdoor cover accessories
- Complete EASE and CAD information available online
Model |
CP8 |
Configuration |
Two-way active loudspeaker |
LF Transducer: |
8 in (203 mm), cone |
HF Transducer: |
1.4 in (35.6 mm) compression driver |
Frequency Response (-6 dB) |
56 - 20 kHz |
Frequency Range (-10 dB) |
53 - 20 kHz |
Nominal Coverage Angle: |
90° Axisymetric |
Maximum Rated SPL1: |
124 dB |
Amplifier: |
Class D
Peak: 800 W (LF), 200 W (HF) |
Controls: |
Power
2 x Gain
Mic Boost Push Switch
6-way Contour Selection Switch |
Indicators: |
Power LED
2 x Input Signal LED
Input B MIC selected LED
Limiter active LED |
Connectors: |
2 x locking XLR/F ¼” combo (Line Input and Mic/Line input)
1 x 3.5 mm TRS (Stereo Input)
1 x XLR/M (Mix Output)
1 x IEC power connector |
AC Power Input: |
Universal power supply 100 – 240 VAC, 50 – 60 Hz |
AC Power Consumption (1/8th Power): |
100 VAC, 0.75A - 240VAC 0.31A |
Enclosure Material: |
Polypropylene |
Attachment Points: |
M8 threaded insert |
Color: |
Black (RAL 9011) |
Grille: |
18 Gauge powder-coated steel |
Dimensions (HxWxD): |
16.2 x 10.7 x 10.1 in
411 x 273 x 256 mm |
Net Weight: |
21.0 lbs (9.5 kg) |
Shipping Weight: |
25.5 lbs (11.4 kg) |
Regulatory: |
EMC, UL, CB |
Optional Accessories: |
CP8 Tote, CP8 Outdoor Cover, CP8 Yoke |
| ART 708-A is a powerful and versatile solution for a variety of needs, ranging from small-to-medium-scale indoor concerts to outdoor stage monitoring.
Compact, powerful, and accurately designed to guarantee accurate monitoring and effortless portability, it features a class-D 800 Watt amplifier with innovative DSP sound processing and 8’’ high-power woofer.
APPLICATIONS
- • Nearfield & portable PA
- • Foreground/background PA, distributed PA, frontfill and sidefill
- • Houses of worship, video monitoring, retail, clubs, performance theatre, theme parks
- • Compact voice reinforcement systems
- • Stage monitoring
General Specs
o 127 dB Max SPL
o 800 WATT 2-way peak power
o 90 x 70, Wide dispersion constant directivity horn
o Innovative DSP Processing
o 1" Compression Driver, 1.0" v.c.
o 8" Woofer
o FiRPHASE Technology
Acoustical Specs
• Frequency Response -3 dB: 60 Hz ÷ 20 Hz
• Max SPL: 127 dB
• Horizontal coverage angle: 90°
• Vertical coverage angle: 70°
• Compression Driver: 1“, 1.0" v.c.
• Woofer: 8“, 2" v.c.
Inputs/Outputs
• Input signal: bal / unbal
• Input connectors: XLR male, Jack
• Output connectors: XLR female
• Input sensitivity: -2 dBu / +4 dBu
Processor Section
• Crossover frequencies: 1600 Hz
• Protections: RMS
• Limiter: Soft limiter
• Controls: Volume, Boost, Mic/Line
Amplifier Specifications
Total power: 800 W PEAK
• High frequencies: 200 W PEAK
• Low frequencies: 600 W PEAK
Total power: 400 W RMS
• High frequencies: 100 W RMS
• Low frequencies: 300 W RMS
• Cooling: Convection
• Connections: VDE AC socket
Cabinet Specs
• Cabinet Material: Composite PP
• Hardware: 2xM10 flying p.
• Handles: 1 top
• Pole Mount/Cap: Yes
• Colour: Black
Size/Weight
• Height: 480/18.88 mm/inch
• Width: 291/11.44 mm/inch
• Depth: 276/10.86 mm/inch
• Net Weight: 10.2/22.48 kg/lbs |
Features
- 2-way, full-range system
– 8″ bass loudspeaker
– Compression driver
– Asymmetric enclosure design for stage monitor use
– Built-in rigging points
– Stand mountable
The Action 8 is a compact 2-way passive full-range loudspeaker that utilizes a 8” low frequency transducer and a full compression driver. The multi-angle cabinet is constructed of Birch plywood protected by an enviormentally friendly ISO-flex black paint finish. A rear located handle and a robust steel grille are provided. A 35 mm tripod socket allows for stand mounting.
Technical Data
RMS Power Handling | 150 W | Peak Power Handling | 600 W | Frequency Range (-10 dB) | 60 Hz-20 kHz | Nominal Impedance | 8 ohms | On-axis Sensitivity 1 W / 1 m | 92 dB SPL | Rated Peak SPL at 1 m | 120 dB | Dispersion | 80º x 80º | Enclosure Material | Birch Plywood | Color/Finish | Black/ISO-Flex Paint | Connectors | 2 x NL4 Speakon | Dimensions (H x W x D) | 47.5 x 27.9 x 25.5 cm
18.7 x 11 x 10 in | Weight | 8.4 kg (18.5 lb) |
|
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Processed Active Monitor
200W+ 50W RMS - 124dB SPL
- 200mm (8’’) custom woofer with improved efficiency and linearity
- 200Wrms class D amplifier for LF and 50Wrms for HF.
- Low noise toroidal transformer power supply
- On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
- 2 DSP preset for maximum acoustical flexibility
- Available in white colour 8AW
Code: |
37689 / 37906 White |
Configuration: |
2 way |
Built-in amplifier LF/HF: |
200/50 W RMS |
Built-in amplifier peak LF/HF: |
400/100 W |
Frequency response: |
60Hz - 20KHz -6dB |
Low Frequency woofer: |
8 - 1.7 coil inch |
High Frequency driver: |
1 -1 coil inch |
Maximum SPL cont/peak: |
120/124 dB |
Dispersion: |
90° x 60° HxV |
Input impedance: |
22 Kohm |
Crossover Frequency: |
2.5 KHz |
AC Power requirements: |
160 VA |
Input connector: |
XLR - jack with loop |
Power cord: |
5 / 16.4 m/ft |
Net Dimension (WxHxD): |
255x415x245 - 10.03x16.33x9.64 mm/inch |
Net Weight: |
8.2 / 18.7 Kg/lb |
Transport Dimension (WxHxD): |
330x480x320 - 12.99x18.89x12.59 mm/inch |
Transport Weight: |
9.7 / 21.38 Kg/lb |
|
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Processed Active Monitor
200W+ 50W RMS - 124dB SPL
- 200mm (8’’) custom woofer with improved efficiency and linearity
- 200Wrms class D amplifier for LF and 50Wrms for HF.
- Low noise toroidal transformer power supply
- On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
- 2 DSP preset for maximum acoustical flexibility
- Available in white colour 8AW
Code: |
37689 / 37906 White |
Configuration: |
2 way |
Built-in amplifier LF/HF: |
200/50 W RMS |
Built-in amplifier peak LF/HF: |
400/100 W |
Frequency response: |
60Hz - 20KHz -6dB |
Low Frequency woofer: |
8 - 1.7 coil inch |
High Frequency driver: |
1 -1 coil inch |
Maximum SPL cont/peak: |
120/124 dB |
Dispersion: |
90° x 60° HxV |
Input impedance: |
22 Kohm |
Crossover Frequency: |
2.5 KHz |
AC Power requirements: |
160 VA |
Input connector: |
XLR - jack with loop |
Power cord: |
5 / 16.4 m/ft |
Net Dimension (WxHxD): |
255x415x245 - 10.03x16.33x9.64 mm/inch |
Net Weight: |
8.2 / 18.7 Kg/lb |
Transport Dimension (WxHxD): |
330x480x320 - 12.99x18.89x12.59 mm/inch |
Transport Weight: |
9.7 / 21.38 Kg/lb |
|
Reviews
There are no reviews yet.