LD SYSTEMS LDPN122A2 1000W peak Active Speaker 250W RMS

User's manual
LD Systems Catalogue

This powerful loudspeaker was designed for live applications, both as a full-range solution as well as in combination with a subwoofer. The bi-amp amplifier section delivers an output of 1000 W Peak and a sound pressure level of 122 dB (max.). This light loudspeaker impresses with rich bass response as well as an assertive midrange. The rear panel offers numerous connections and controls: a microphone input (XLR/jack), a line-in connector (RCA/XLR), a line-out connector (XLR/jack), 2-band EQ, a bass boost switch and a ground lift switch.

Additional highlights are the integral protective circuitry, built-in handles and rigging points, the 36 mm stand mount and the rugged overall design. Optional wall-mount brackets and monitor supports are available. The perfect PA solution for bands, mobile discos or permanent installation in medium-sized clubs and other function rooms.

• 2000W power via ultra-efficient Class-D amplification
• TruSourceTM Technology
• Mackie designed, vertically-aligned, common-magnet TruSource driver
• 12″ LF woofer / 1.75″ HF compression driver
• Incredibly compact, lightweight design
• Powerful TruSource DSP delivers seamless clarity, consistent coverage and unmatched fidelity
• DL2 Integrated Digital Mixer
• Powerful, one-touch digital mixer with bright OLED screen
• Two highly-versatile input channels with FX
• Independent channel level, 3-band EQ and effects control
• 16 great-sounding channel effects include reverb, chorus and delay
• XLR/TRS combo and dual RCA connectors
• Handles mic, line, stereo and instrument signals
• Unmatched system control for professional applications
• Multi-band feedback destroyer
• Six speaker modes deliver the perfect voicing for your application
• Alignment delay up to 300ms for delay stack, balcony, etc.
• Three memory locations for instant venue setting recall
• Smart Protect DSP dynamically protects amp/driver
• Innovative ultra-compact design
• 1/3 smaller than a traditional 2-way
• Fit an entire DLM system in nearly any car
• Stack them up for storage
• Pole-mountable on tripod or atop DLM12S using SPM300 speaker pole
• Flyable via standard M10 rigging hardware
• Wall-mount them using SWM300 articulated arm for stealthy, powerful install system
• Roadworthy PC-ABS cabinet with  pro black finish and ergonomic top carry handle
• Rugged, powder-coated 20 gauge steel grille
• Integrated kickstand delivers perfect angle for personal monitor use
• Ridiculously lightweight (31 lbs. / 14.1 kg)

Features:

DH-1K 1.5-inch Titanium Diaphragm Compression Driver
EVS-12K 12-inch Woofer
121 dB max. SPL
500 W Class-D Amplifier
Integrated DSP with FIR filter


Cabinet
Powered two-way full-range speaker, 12" woofer, 1.5" compression driver, vented design
Maximum Amplifier Output Capability, IHF-A
500 W
Amplifier Power RMS
420 W
Max. SPL 1m / calc.
121 dB
Frequency Range (-10 dB)
55 Hz to 17 kHz
Nominal Coverage Angle
90° x 50° (Horizontal x Vertical)
Audio Input (LINE 1 or MIC/LINE 2)
XLR and 1/4" TRS combination
Audio Input (AUX)
Stereo RCA, unbalanced
Audio Output (LINK OUTPUT)
XLR, balanced
Digital Signal Processing
28/56-Bit, 48 kHz
Crossover Frequency
1.7 kHz
Product Dimensions (W x H x D)
607 x 362 x 340 mm
Net Weight
16.8 kg
Optional Accessories
---
SH-112A, Dust Cover
F01U270395
VPM 1500, variable speaker pole
F01U141047
BS 35, speaker stand
F01U141046

    2" Titanium dome, high frequency driver
    DSP processing, boost eq, soft limiter and protection
    Xlr/jack input, xlr signal output

Acoustical Specifications

    Frequency Response -3 dB: 45 Hz ÷ 20 kHz
    Max SPL: 128 dB
    Horizontal coverage angle: 90°
    Vertical coverage angle: 60°
    Compression Driver: 2" 2.5" voice coil
    Woofer: 12" 3" voice coil

Input/Output Section

    Input connectors: xlr-jack
    Output connectors: xlr

Processor Section

    Crossover frequencies: 1300 Hz
    Controls: Flat, Boost

Amplifier Specifications

    Total power: 400 W
    High frequencies: 100 W
    Low frequencies: 300 W

Cabinet

    Handles: 1 on top, 2 on sides
    Pole Mount/Cap: yes
    Grille: steel

Physical Specifications

    Height: 637/25 mm/inch
    Width: 384/15.11 mm/inch
    Depth: 363/14.2 mm/inch
    Net Weight: 20.2/44.53 kg/lbs

The DBR12 represents a perfect balance of size and performance, with 1000W of power and outstanding resolution at any output level. Ideal for front-of-house, floor monitoring applications or even the stage side fills, the DBR12 is an ideal choice for a wide range of applications.

Key Features:
- Compact Powered bi-amplified
full-range loudspeaker with JBL
DrivePack® technology for portable or
installed use
- Optimized for both portable/rental or
permanent-venue use
- 1750 watts peak output power,
875 watts continuous
- 15-inch Differential Drive® lowfrequency
driver for extended lowfrequency
output
- Robust powder-coated die cast
aluminum handles, designed for
strength and comfort
- Integrated 35 mm stand mount

Specifications:
Frequency Response (+/-3 dB): 60 Hz - 18 kHz80 Hz – 20 kHz
Frequency Range (-10 dB): 45 Hz - 20 kHz50 Hz – 20 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 135 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2265FF, 381 mm (15 in) dia., 76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 2 x 2 ohms
High Frequency: JBL 2452H-SL, 100 mm (4 in) titanium damped
diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DPC1 Internal Amplification Output
(at nominal load) 1750 Watts Peak, 875 Watts Continuous
DPC1 Output (Continuous IEC shaped
pink noise into rated load impedance): 750LF/125HF Watts
DPC1 Output Section: LF: Dual Bridged Technology™, Class D
HF: Bridged Class D
Audio Input connector XLR with loop-through
User Controls: 80 Hz Subwoofer High Pass Filter. Enable/Disable
0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing: DSP based, resident in Input Module.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 13 M10 Fittings, 35 mm pole mount socket
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 613 x 434 x 359 mm
24.1 x 17.1 x 14.1 in
Net Weight: 24.7 kg (55 lb)