LD SYSTEMS LDPN122A2 1000W peak Active Speaker 250W RMS

Discontinued

219.99 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
User’s manual LD Systems Catalogue   The LD Systems LDPN 122A2 is an active bass reflex multifunctional loudspeaker equipped with a 12″ FE speaker and a 1″ compression driver. This powerful loudspeaker was designed for live applications, both as a full-range solution as well as in combination with a subwoofer. The bi-amp amplifier section delivers […]

 

Read more

User’s manual
LD Systems Catalogue

 

The LD Systems LDPN 122A2 is an active bass reflex multifunctional loudspeaker equipped with a 12″ FE speaker and a 1″ compression driver.

This powerful loudspeaker was designed for live applications, both as a full-range solution as well as in combination with a subwoofer. The bi-amp amplifier section delivers an output of 1000 W Peak and a sound pressure level of 122 dB (max.). This light loudspeaker impresses with rich bass response as well as an assertive midrange. The rear panel offers numerous connections and controls: a microphone input (XLR/jack), a line-in connector (RCA/XLR), a line-out connector (XLR/jack), 2-band EQ, a bass boost switch and a ground lift switch.

Additional highlights are the integral protective circuitry, built-in handles and rigging points, the 36 mm stand mount and the rugged overall design. Optional wall-mount brackets and monitor supports are available. The perfect PA solution for bands, mobile discos or permanent installation in medium-sized clubs and other function rooms.

Product type

PA loudspeaker


Type

Actives


Low/mid driver dimensions

12 ”


Woofer Size

304 mm


Low/mid driver magnet

Ferrite


Low/mid driver brand

Custom-made


Low/mid driver voice coil

120 ”


Tweeter dimensions

1 ”


Tweeter dimensions (mm)

25 mm


Tweeter magnet

Ferrite


Tweeter brand

Custom-made


Amplifier

Class A/B (Bi-amp)


Dispersion (H x V)

90 x 40 °


RMS

250 W


Peak power

1000 W


Frequency response

60 – 18.000 Hz


Integrated media player

no


Protection circuits

overload


Controls

Bass , Bass boost , ground lift , Line Gain , mains switch (on/off) , Mic Gain , Treble , volume


Indicators

clip , Power , signal


Line inputs

2


Line input connectors

2 x RCA , XLR


Mic inputs

2


Mic inputs

6.3 mm Jack , XLR


Line outputs

2


Line output connectors

6.3 mm Jack , XLR


Operating voltage

transformer


Operating voltage

230 V AC / 50-60 Hz


Cabinet material

polypropylene


Cabinet construction

vented


Width

430 mm


Height

580 mm


Depth

315 mm


Weight

18,05 kg


Features

Speaker Pole Mount (36 mm)

Weight 17.50 kg

Reviews

There are no reviews yet.

Be the first to review “LD SYSTEMS LDPN122A2 1000W peak Active Speaker 250W RMS”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD SYSTEMS LDPN122A2 1000W peak Active Speaker 250W RMS removeJBL VP7215/95DPC Compact Active Speaker 875 Watts removeJBL AWC 129 SPEAKER 2 WAY Coaxial 400W 12'' 8Ω 96dB IP 56 removeBEHRINGER B112D EUROLIVE Active 2-Way 12" PA Speaker System with Wireless Option and Integrated Mixer 1000 Watt Peak removeYAMAHA DBR-12 Αctive Loudspeaker 1000W RMS removeQSC KW122 2 WAY ACTIVE LOUDSPEAKER 12'' 1000 W Class D remove
NameLD SYSTEMS LDPN122A2 1000W peak Active Speaker 250W RMS removeJBL VP7215/95DPC Compact Active Speaker 875 Watts removeJBL AWC 129 SPEAKER 2 WAY Coaxial 400W 12'' 8Ω 96dB IP 56 removeBEHRINGER B112D EUROLIVE Active 2-Way 12" PA Speaker System with Wireless Option and Integrated Mixer 1000 Watt Peak removeYAMAHA DBR-12 Αctive Loudspeaker 1000W RMS removeQSC KW122 2 WAY ACTIVE LOUDSPEAKER 12'' 1000 W Class D remove
Image
SKULDPN122A2VP 7215/95DPCAWC 129E005225H000.00139010116
Rating
Price 219.99 incl. GR VAT 4,695.00 incl. GR VAT 1,384.00 incl. GR VAT 294.00 incl. GR VAT 539.00 incl. GR VAT 1,449.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

In stock

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderIn stockAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

User's manual
LD Systems Catalogue

 

The LD Systems LDPN 122A2 is an active bass reflex multifunctional loudspeaker equipped with a 12" FE speaker and a 1" compression driver.

This powerful loudspeaker was designed for live applications, both as a full-range solution as well as in combination with a subwoofer. The bi-amp amplifier section delivers an output of 1000 W Peak and a sound pressure level of 122 dB (max.). This light loudspeaker impresses with rich bass response as well as an assertive midrange. The rear panel offers numerous connections and controls: a microphone input (XLR/jack), a line-in connector (RCA/XLR), a line-out connector (XLR/jack), 2-band EQ, a bass boost switch and a ground lift switch.

Additional highlights are the integral protective circuitry, built-in handles and rigging points, the 36 mm stand mount and the rugged overall design. Optional wall-mount brackets and monitor supports are available. The perfect PA solution for bands, mobile discos or permanent installation in medium-sized clubs and other function rooms.

Product type PA loudspeaker
Type Actives
Low/mid driver dimensions 12 "
Woofer Size 304 mm
Low/mid driver magnet Ferrite
Low/mid driver brand Custom-made
Low/mid driver voice coil 120 "
Tweeter dimensions 1 "
Tweeter dimensions (mm) 25 mm
Tweeter magnet Ferrite
Tweeter brand Custom-made
Amplifier Class A/B (Bi-amp)
Dispersion (H x V) 90 x 40 °
RMS 250 W
Peak power 1000 W
Frequency response 60 - 18.000 Hz
Integrated media player no
Protection circuits overload
Controls Bass , Bass boost , ground lift , Line Gain , mains switch (on/off) , Mic Gain , Treble , volume
Indicators clip , Power , signal
Line inputs 2
Line input connectors 2 x RCA , XLR
Mic inputs 2
Mic inputs 6.3 mm Jack , XLR
Line outputs 2
Line output connectors 6.3 mm Jack , XLR
Operating voltage transformer
Operating voltage 230 V AC / 50-60 Hz
Cabinet material polypropylene
Cabinet construction vented
Width 430 mm
Height 580 mm
Depth 315 mm
Weight 18,05 kg
Features Speaker Pole Mount (36 mm)

Key Features:
- Compact Powered bi-amplified
full-range loudspeaker with JBL
DrivePack® technology for portable or
installed use
- Optimized for both portable/rental or
permanent-venue use
- 1750 watts peak output power,
875 watts continuous
- 15-inch Differential Drive® lowfrequency
driver for extended lowfrequency
output
- Robust powder-coated die cast
aluminum handles, designed for
strength and comfort
- Integrated 35 mm stand mount

Specifications:
Frequency Response (+/-3 dB): 60 Hz - 18 kHz80 Hz – 20 kHz
Frequency Range (-10 dB): 45 Hz - 20 kHz50 Hz – 20 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 135 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2265FF, 381 mm (15 in) dia., 76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 2 x 2 ohms
High Frequency: JBL 2452H-SL, 100 mm (4 in) titanium damped
diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DPC1 Internal Amplification Output
(at nominal load) 1750 Watts Peak, 875 Watts Continuous
DPC1 Output (Continuous IEC shaped
pink noise into rated load impedance): 750LF/125HF Watts
DPC1 Output Section: LF: Dual Bridged Technology™, Class D
HF: Bridged Class D
Audio Input connector XLR with loop-through
User Controls: 80 Hz Subwoofer High Pass Filter. Enable/Disable
0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing: DSP based, resident in Input Module.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 13 M10 Fittings, 35 mm pole mount socket
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 613 x 434 x 359 mm
24.1 x 17.1 x 14.1 in
Net Weight: 24.7 kg (55 lb)

The AWC129 is a compact, coaxial-driver, 2-way, highly weather-resistant full-range loudspeaker system which is ideal for speech and music in a wide variety of applications, including sports facilities, racetracks, stadiums, fairgrounds, rodeos, skating rinks, themed entertainment venues, cruise ships, water parks, outdoor background music/paging systems, swimming pools, and a wide variety of other outdoor or indoor venue types. Features : - Highly weather-resistant IP56 rating - Consistent 90° x 90° broadband pattern control - Components: ? 300 mm (12 in) woofer with Kevlar-reinforced cone and 75 mm (3 in) voice coil. ? 25 mm (1 in) exit compression driver with unique patented design and high temperature polymer diaphragm. - Extraordinary clarity for speech, with extended frequency response for music. - Advanced high-slope crossover network for constant coverage and smooth, natural midrange. - 400 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability. - High-power passive crossover network. - Overload protection - 55 Hz ? 20 kHz frequency response. - 200 Watt 70V/100V multi-tap (built-in transformer) direct 8Ω low-impedance.

Product Features:

High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
"Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs
Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection
Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
Extremely powerful 12'' long-excursion driver provides incredibly deep bass and acoustic power
state-of-the-art 1" phenolic-diaphragm compression driver for exceptional high-frequency reproduction
Ultra-wide dispersion, large-format exponential horn
Additional Line output allows linking of additional speaker systems
Versatile trapezoidal enclosure design allows different positioning:
- Stand mounting with 35-mm pole socket
- Tilts on its side for use as a floor monitor
Ergonomically shaped handles for easy carrying and setup
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

 

 User's Manual

The DBR12 represents a perfect balance of size and performance, with 1000W of power and outstanding resolution at any output level. Ideal for front-of-house, floor monitoring applications or even the stage side fills, the DBR12 is an ideal choice for a wide range of applications.

Specification     Detail
Powered     Yes
Power Configuration     Bi-amped
LF Driver Size     12“
LF Driver Power Amp     500W Class D
HF Driver Size     1.75“
HF Driver Power Amp     500W Class D
Frequency Range     50Hz-20kHz (-10dB)
Crossover Frequency     2kHz
Maximum Peak SPL     131dB
Horizontal Coverage Angle     75 Degrees Axisymmetric
Vertical Coverage Angle     75 Degrees Axisymmetric
Enclosure Material     15mm Birch Plywood
Mounting Options     Pole, Floor Wedge, Fly
Inputs     1 x Combo (XLR/TRS, Mic/Line), 1 x Combo (XLR/TRS, Line), 2 x RCA
Outputs     2 x XLR (Direct), 1 x XLR (Line)
Height     26“
Width     15“
Depth     15.4“
Weight     49 lbs.
Manufacturer Part Number     KW122

Weight17.50 kg24.70 kg16.00 kg12.30 kg16.00 kg22.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 17.50 kg
Weight 24.70 kg
Weight 16.00 kg
Weight 12.30 kg
Weight 16.00 kg
Weight 22.20 kg