LD SYSTEMS LDPN152A2 1200 WATT peak Active Speaker 300W rms

User's manual
Soundcheck 01/05

This powerful loudspeaker was designed for live applications, both as a full-range solution as well as in combination with a subwoofer. The bi-amp amplifier section delivers an output of 1200 W (Peak) and a sound pressure level of 124 dB (max.). This light loudspeaker impresses with rich bass response as well as an assertive midrange. The rear panel offers numerous connections and controls: 2 microphone inputs (XLR/jack), a line-in connector (RCA/XLR), a line-out connector (XLR/jack), 2-band EQ, a bass boost switch and a ground lift switch.

Additional highlights are the integral protective circuitry, built-in handles and rigging points, the 36 mm stand mount and the rugged overall design. Optional wall-mount brackets and monitor supports are available. The perfect PA solution for bands, mobile discos or permanent installation in medium-sized clubs and other function rooms.

he das Audio dr speaker range combine the best of lightweight portability with premium quality sound performance and high output capabilities. The Dr 15a is a very portable self-powered system with an extremely efficient 15" woofer that is capable of a seriously impressive and very punchy bass & mid range output. A custom m-34 compression driver handles high frequency reproduction with a clean, smooth and dynamically transparent clarity. Each driver is powered directly by its own perfectly matched independent amplifier in this bi-amplified active system for maximum efficiency and incredible sound pressure levels. A built-in two-channel mixer comprises both microphone and line inputs, allowing for use in any format, with or without additional mixer or audio sources. Manufactured and designed by das, in Spain, the dr are constructed using the latest in, mechanics, magnetics, acoustics and electronics technology to create speakers that are tough, reliable and capable out performing any rival model their class.

TECHNICAL SPECIFICATIONS:
Mobile DJ, disco, PA or install use
200 Watt active speaker
Nominal LF power amplifier 150 Watt (AB)
Nominal HF power amplifier 50 Watt (AB)
127dB SPL
45Hz - 20kHz frequency range (-dB)
2 way
15" woofe speaker 
1" compression driver 
Female XLR-Jack input
LOOP THRU : Jack
Input Impedance line : 20 kohms; mic : 2 kohms
Polypropylene enclosure
35mm integral pole mount fitting
Black finish



Weight: 23.4kg (including packaging)
Height: 70.0cm x Width: 45.0cm x Depth: 36.0cm
Warranty: 12 months
Power: 240V / 110V Switchable

Features

    400 Watt digital bi-amplification
    129 dB max spl
    Wide dispersion 90 x 60 constant directivity horn
    15" High power woofer, 3" voice coil
    2" Titanium dome, high frequency driver
    DSP processing, boost eq, soft limiter and protection
    Xlr/jack input, xlr signal output

Acoustical Specifications

    Frequency Response -3 dB: 45 Hz ÷ 20 kHz
    Max SPL: 129 dB
    Horizontal coverage angle: 90°
    Vertical coverage angle: 60°
    Compression Driver: 2" 2.5" voice coil
    Woofer: 15" 3" voice coil

Input/Output Section

    Input connectors: xlr-jack
    Output connectors: xlr

Processor Section

    Crossover frequencies: 1300 Hz
    Controls: Flat, Boost

Amplifier Specifications

    Total power: 400 W
    High frequencies: 100 W
    Low frequencies: 300 W

Cabinet

    Cabinet Material: Composite PP
    Handles: 1 on top, 2 on sides
    Pole Mount/Cap: yes
    Grille: steel

Physical Specifications

    Height: 708/27.8 mm/inch
    Width: 437/17.2 mm/inch
    Depth: 389/15.3 mm/inch
    Net Weight: 26/57.32 kg/lbs

Features:

    EVS-18K 18-inch Woofer
    123 dB max. SPL
    400 W Class-D Amplifier
    Integrated DSP

 
Cabinet
Powered subwoofer 1 x 18“, vented design
Maximum Amplifier Output Capability, IHF-A
400 W
Amplifier Power RMS
305 W
Max. SPL 1m / calc.
123 dB
Frequency Range (-10 dB)
40 Hz to 130 Hz
Nominal Coverage Angle
Omnidirectional
Audio Input
XLR and 1/4" TRS combination
Audio Output (LINK OUTPUT)
XLR, balanced
Digital Signal Processing
28/56-Bit, 48 kHz
Crossover Frequency
100 Hz
Product Dimensions (W x H x D)
661 x 507 x 574 mm
Net Weight
31.3 kg
Optional Accessories
---
SH-118A, Dust Cover
F01U270397

User's Manual

Specification     Detail
Powered     Yes
Power Configuration     Bi-amped
LF Driver Size     15“
LF Driver Power Amp     500W Class D
HF Driver Size     1.75“
HF Driver Power Amp     500W Class D
Frequency Range     44Hz-20kHz (-10dB)
Crossover Frequency     2kHz
Maximum Peak SPL     133dB
Horizontal Coverage Angle     60 Degrees Axisymmetric
Vertical Coverage Angle     60 Degrees Axisymmetric
Enclosure Material     15mm Birch Plywood
Mounting Options     Pole, Fly
Inputs     1 x Combo (XLR/TRS, Mic/Line), 1 x Combo (XLR/TRS, Line), 2 x RCA
Outputs     2 x XLR (Direct), 1 x XLR (Line)
Height     32.1“
Width     17.5“
Depth     15.2“
Weight     64 lbs.
Manufacturer Part Number     KW152

Specifications

• LF Amplifier Power (RMS): 1000 watts
• HF Amplifier Power (RMS): 250 watts
• Frequency Response (-3dB): 58-18000 Hz
• Frequency Response (-10dB): 50-20000 Hz
• Max. SPL/1m (calc); half space: 133 dB
• Coverage (nominal -6dB) Horizontal: 90°
• Coverage (nominal -6dB) Vertical: 50°
• LF Transducer: DVX3150
• HF Transducer: ND2
• Crossover Frequency: 1500 Hz
• Enclosure Material: Polypropylene
• Flying: Yes
• Input Connections: XLR
• Chassis Size: 15“
• Speaker Type: Full-range, powered monitors, poweredspeakers, two-way wedges
• Weight (net): 50.49 lbs
• Dimensions (H x W x D): 27.24" x 17.56" x 16.18“