LD Systems LDSAT122G2 12″ Passive Installation LoudSpeaker black

378.87 incl. GR VAT

In stock

EAN: 4049521222856
Installments calculation
CompareAdd to wishlist Submit Better Price
Passive 2-way bass-reflex installation speaker 250 W permanent load capacity 121 dB maximum sound-level pressure 12″ custom woofer and 1″ Celestion high-frequency driver Rotating CD horn with 80° x 60° dispersion For vertical or horizontal use speakON-compatible and terminal block input 4 x M8 mounting holes Shock-resistant front grille for optimum speaker protection Extensive range […]

 

Read more

  • Passive 2-way bass-reflex installation speaker
  • 250 W permanent load capacity
  • 121 dB maximum sound-level pressure
  • 12″ custom woofer and 1″ Celestion high-frequency driver
  • Rotating CD horn with 80° x 60° dispersion
  • For vertical or horizontal use
  • speakON-compatible and terminal block input
  • 4 x M8 mounting holes
  • Shock-resistant front grille for optimum speaker protection
  • Extensive range of smart accessories for installation
  • Available in black or white

With its streamlined, elegant design, the LD Systems SAT 122 G2 is excellently suited for permanent installation and discreet integration into virtually any setting. It features a 12″ custom woofer and a 1″ compression driver from Celestion, connected to a rotating CD horn with 80° x 60° dispersion. This makes the passive 2-way speaker ideal for both vertical and horizontal use.

The SAT 122 G2 achieves a maximum sound pressure level of 121 dB over a frequency response curve of 60 Hz to 19 kHz with a permanent load capacity of 250 watts. The reflex casing made of 15 mm MDF has four M8 mounting holes. The inputs are a speakON-compatible socket and a terminal block, while an additional terminal block serves as an output for convenient parallel connection.

Special wall holders are available as an accessory to facilitate wall mounting. The SAT 122 G2 is available in black (Art. No. LDSAT1222G2) or white textured finish (Art. No. LDSAT1222G2W).

Product type

Installation Loudspeakers


Type

Wall-mounted Loudspeaker


Low/mid driver dimensions

12 ”


Woofer size

304.8 mm


Woofer magnet

Ferrite


Woofer brand

Custom-made


Woofer voice coil (mm)

63.5 mm


Horn

CD horn


HF driver dimensions

1 ”


HF Driver Size

25.4 mm


HF driver magnet

Ferrite


HF driver brand

Celestion


HF driver voice coil

1 ”


HF Driver Voice Coil

25.4 mm


Dispersion (H x V)

80 x 60 °


Load rating (RMS)

250 W


Peak power

500 W


Frequency response

60 – 19000 Hz


SPL (1W/1m)

97 dB


Max. SPL

121 dB


Impedance

8 Ohm(s)


Protection circuits

HF Driver


Loudspeaker inputs

2


Speaker input connections

Speakon compatible , terminal block


Loudspeaker outputs

1


Speaker output connections

terminal block


Cabinet material

15 mm MDF


Cabinet surface

texture paint


Cabinet colour

Black


Cabinet construction

vented


Width

350 mm


Height

580 mm


Depth

310 mm


Weight

16,3 kg


Weight 16.00 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems LDSAT122G2 12″ Passive Installation LoudSpeaker black”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems LDSAT122G2 12" Passive Installation LoudSpeaker black removeELECTRO VOICE ZX3 60B SPEAKER 2 WAY 600W removeDYNACORD D12 Fullrange 2-Way Speaker 300 Watts removeRCF C5212-L: 500 W AES, 12", 2", TWO-WAY PASSIVE SPEAKER removeTOA HS-120B Coaxial Array Speaker System removeDYNACORD D12W Fullrange 2-Way Speaker White 300 Watts remove
NameLD Systems LDSAT122G2 12" Passive Installation LoudSpeaker black removeELECTRO VOICE ZX3 60B SPEAKER 2 WAY 600W removeDYNACORD D12 Fullrange 2-Way Speaker 300 Watts removeRCF C5212-L: 500 W AES, 12", 2", TWO-WAY PASSIVE SPEAKER removeTOA HS-120B Coaxial Array Speaker System removeDYNACORD D12W Fullrange 2-Way Speaker White 300 Watts remove
Image
SKULDSAT122G2001974E009263C5212LHS-120BE009283
Rating
Price 378.87 incl. GR VAT 920.00 incl. GR VAT 862.00 incl. GR VAT 1,157.84 incl. GR VAT 353.00 incl. GR VAT 1,509.00 incl. GR VAT
Stock

In stock

In stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityIn stockIn stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • Passive 2-way bass-reflex installation speaker
  • 250 W permanent load capacity
  • 121 dB maximum sound-level pressure
  • 12" custom woofer and 1" Celestion high-frequency driver
  • Rotating CD horn with 80° x 60° dispersion
  • For vertical or horizontal use
  • speakON-compatible and terminal block input
  • 4 x M8 mounting holes
  • Shock-resistant front grille for optimum speaker protection
  • Extensive range of smart accessories for installation
  • Available in black or white
With its streamlined, elegant design, the LD Systems SAT 122 G2 is excellently suited for permanent installation and discreet integration into virtually any setting. It features a 12" custom woofer and a 1" compression driver from Celestion, connected to a rotating CD horn with 80° x 60° dispersion. This makes the passive 2-way speaker ideal for both vertical and horizontal use. The SAT 122 G2 achieves a maximum sound pressure level of 121 dB over a frequency response curve of 60 Hz to 19 kHz with a permanent load capacity of 250 watts. The reflex casing made of 15 mm MDF has four M8 mounting holes. The inputs are a speakON-compatible socket and a terminal block, while an additional terminal block serves as an output for convenient parallel connection. Special wall holders are available as an accessory to facilitate wall mounting. The SAT 122 G2 is available in black (Art. No. LDSAT1222G2) or white textured finish (Art. No. LDSAT1222G2W). Product type Installation Loudspeakers
Type Wall-mounted Loudspeaker
Low/mid driver dimensions 12 "
Woofer size 304.8 mm
Woofer magnet Ferrite
Woofer brand Custom-made
Woofer voice coil (mm) 63.5 mm
Horn CD horn
HF driver dimensions 1 "
HF Driver Size 25.4 mm
HF driver magnet Ferrite
HF driver brand Celestion
HF driver voice coil 1 "
HF Driver Voice Coil 25.4 mm
Dispersion (H x V) 80 x 60 °
Load rating (RMS) 250 W
Peak power 500 W
Frequency response 60 - 19000 Hz
SPL (1W/1m) 97 dB
Max. SPL 121 dB
Impedance 8 Ohm(s)
Protection circuits HF Driver
Loudspeaker inputs 2
Speaker input connections Speakon compatible , terminal block
Loudspeaker outputs 1
Speaker output connections terminal block
Cabinet material 15 mm MDF
Cabinet surface texture paint
Cabinet colour Black
Cabinet construction vented
Width 350 mm
Height 580 mm
Depth 310 mm
Weight 16,3 kg

Electro-Voice ZX3-60B - 600-Watt, 12” two-way loudspeaker system, bi-amp or passive, 60 X 60 horn, integral stand mount, Neutrik Speakon, Black

This item is BLACK.

The Electro-Voice ZX3-60B is a 2-way P.A. passive loudspeaker with a 600-watt continuous power handling capacity and a 60x60° coverage angle, for long-throw and cluster applications. The high-tech, high-impact polypropylene enclosure houses a 12" woofer and a 1" Neodymium compression driver with a large 2" voice-coil.
The ZX3-60B cabinet is equipped with 10 integral suspension points for permanent suspension or bracketing, and 3 Anchor Plates for single-stud fittings, with an additional pair of Anchor Plate attachment points on the bottom of the speaker.

• 2-way 600-watt suspension P.A. speaker with 60x60° coverage for long-throw and cluster applications
• High output, 131dB SPL capacity
• Adjustable feet allow 45° or 55° speaker placement angle for use as stage monitor
• 12" forced-air-cooled woofer, 1" titanium diaphragm compression driver with 2" voice coil
• Rugged, high-tech polypropylene enclosure
• 3 suspension Anchor Plates, 10 M8 insert suspension points Additional Information on the ZX3-60B

 Active or Passive   Passive
 Frequency Response -10dB:48-20,000Hz
 Power Capacity 600W
 Maximum Sound Pressure Level (SPL) 131dB
 Nominal Sensitivity 97dB
 Impedance 8 Ohms
 Crossover 2KHz
 Low Frequency Driver DVX3121, 12" (305mm) Driver
 High Frequency Driver ND2, 1" (25.4mm) exit Neodymium
 Enclosure Material Polypropylene Structural Foam
 Input Connections Neutrik Speakon NL4\'s x 2
 Mounting Options Enclosure has locations for 4 Single-StudAttachment Plates and 10 Forged SteelEyebolts - 2 on Top, 2 on Bottom, 2 onSide, and 1 on Rear of Enclosure
 Dimensions 24.14 x 15.64 x 14.26" (613 x 397 x 362mm)
 Weight 43.7 lbs (19.8 kg)

With the newly designed D12, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust highperformance professional 12" 2-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
With a variety of suspension accessories and conservative cosmetics, the D12 is ideally suited to be used in demanding fi xed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road.
For low frequencies an Electro-Voice DL12BFH is used. The recently developed Electro-Voice ND2 Neodymium driver is used for the projection of mid and high frequencies. The Constant- Direcctivity HF horn has been integrated into the baffl e by CAD methods.Nominal coverage angle of the cabinet is 80°*40°, horizontal*vertical respectively. Power handling of the cabinet is 300W (continuous) and 1200W peak.. Maximum sound pressure level is 129dB, the frequency range of the D12 is 70Hz to 18kHz. The D12 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in in highperformance small-format active and passive satellite systems.

Cabinet Full-Range Configuration Passive 2-Way Nominal Impendance 8 ohms Rated power RMS 300 W Program power 600 W Peak power 1200 W SPL 2,83V / 1m (1W/8 ohms) 98 dB Max. SPL 1m (calc. with peak) 129 dB Frequency range (-10dB) 70Hz - 18 kHz Nominal Coverage angle 80° x 40° Passive crossover frequency 1,5 kHz Voice ceil tracking protection Yes Component High ND2 S-8 Component Low DL 12 BFH Connectors 1+/1- Wired through 2+/2- Connector model Speakon 2x NL4 MPR Dimensons (WxHxD) mm 429,5 x 596 x 320,5 Shipping weight 17 kg Net weight 16 kg Enclosure material Polypropylene Finish Black Grille, Steel Powder coated Front b/w Acoustic Foam Handles 1

The C5212 L is a full range extremely narrow dispersion two-way loudspeaker system for medium throw applications.

The high-frequency section is a constant directivity horn loaded to a 1.4” Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion.
The 60° x 40° horn design offers higher sensitivity for longer distance applications.
The low-frequency transducer is a 12” woofer with a 3” voice coil.
The crossover is easily bypassed for bi-amp via a recessed changeover switch.
 

Features
60° x 40° CMD (Constant Matching Design) constant directivity horn
1.4" neodymium compression driver with 2.5" diaphragm assembly
12" woofer with 3" voice coil
Dual-function design: built in passive crossover or external bi-amp
Rotatable Horn System for horizontal cabinet mounting applications
HF driver AMCDP (Active Mosfet Compression Driver Protection)
LICC (Low Impedance Compensated Crossover) network

 

Acoustical Specifications
Frequency Response -10 dB:54 Hz÷ 20 kHz
Frequency Response -3 dB:65 Hz÷ 20 kHz
Max SPL @ 1m:133 dB 
Horizontal coverage angle:60° 
Vertical coverage angle:40° 
Directivity index; Q:10 
System Sensitivity:100 dB 
Nominal Impedance:8 Ω 
Power Handling:500 Watt 
Peak Power Handling:2000 Watt 
Recommended Amplifier:1000 
Protections:Dynamic 
Crossover frequencies:1200 Hz 
TRANSDUCERS
Compression Driver:2“HF driver, 2.5" voice coil 
Nominal Impedence:8 Ω 
Input Power Rating:100 Watt AES 
Sensitivity:111 dB 
Woofer:12“woofer, 3" voice coil 
Nominal Impedence:8 Ω 
Input Power Rating:400 Watts AES 
Sensitivity:98 dB 
INPUT SECTION
Input connector:Speakon NL4 - Full range or Bi-Amp 
Output connector:Speakon NL4 
CABINET
Cabinet Material:15 mm birch plywood construction 
Hardware:9 x M10 inserts 
Handles:2 on side 
Pole Mount/Cap:Yes 
Grille:Custom perforated steel grille 
Colour:Black, white, scratch resistant paint 
PHYSICAL SPECIFICATIONS
Height:600/23.62 mm/inch 
Width:364 / 14.33 mm/inch 
Depth:385 / 15.16 mm/inch 
Net Weight:23 / 50.7 Kg/Lbs 

 

Hχείο 2 δρόμων με ομοαξονική διάταξη των tweeters (array), woofer 12“, tweeter 6 X 0,5“, 300W program, 8Ω, διασπορά 90° X 40°, απόκριση συχνότητας 80Hz-20kHz, 97dBSPL/1W/1M, Καμπίνα πολυπροπυλενίου, weather resistant, μαύρο χρώμα, (361 (W) Χ 448 (H) Χ 320 (D)mm). Βάρος 8,5 Kg.

With the newly designed D12W, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust highperformance professional 12" 2-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
With a variety of suspension accessories and conservative cosmetics, the D12 is ideally suited to be used in demanding fixed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road.
For low frequencies an Electro-Voice DL12BFH is used. The recently developed Electro-Voice ND2 Neodymium driver is used for the projection of mid and high frequencies. The Constant- Direcctivity HF horn has been integrated into the baffle by CAD methods.Nominal coverage angle of the cabinet is 80°*40°, horizontal*vertical respectively. Power handling of the cabinet is 300W (continuous) and 1200W peak.. Maximum sound pressure level is 129dB, the frequency range of the D12 is 70Hz to 18kHz. The D12 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in in highperformance small-format active and passive satellite systems.

Weight16.00 kg19.80 kg17.00 kg25.00 kg8.50 kg19.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 16.00 kg
Weight 19.80 kg
Weight 17.00 kg
Weight 25.00 kg
Weight 8.50 kg
Weight 19.00 kg