LD Systems LDSAT242W G2 INSTALLATION SERIES 2 x 4″ Installation Monitor Passive White 100W

maximum sound-level pressure of 108 dB. The LD SAT242G2 is rated for 100 W continuous power can can be used alone as a full-range speaker or with a subwoofer in the in the LD installation series for bass expansion.

Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL62 2-Way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL62 is ideally suited to be used in most demanding applications. The VL62 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies one ultra-low distortion DND 6130-16 Neodymium transducer is used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available.

Order No. D 113 127 Cabinet Full-Range Configuration Passive 2-Way Nominal impedance 16 Ohms Rated power RMS 150 Watts Program power 300 Watts Peak power 600 Watts SPL 1W / 1m 4V / 16Ohm 94 dB Max. SPL 1m(calculated with peak power) 122 dB Frequency range ( -10dB ) Full range 90Hz - 20kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 60Hz - 20kHz Coverage angle nominal 90° *40° Passive crossover frequency 2.2kHz Voice coil tracking protection Halogen Component HIGH Electro-Voice DH 3 Order No. 353 078 Component LOW DND 6130-16 Order No. 366 420 Connectors Full-Range 1+, 1- Wired through 1+, 1- Connector modelSpeakon 2x NL4 MPR Dimensions (WxHxD) 217x375x230 mm Shipping weight 10 kg Net weight 8 kg Enclosure material Birch plywood Finish Black 2-component paint Grille Powder coated steel, acoustic foam

The SR-H2L Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.

Specification  Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 180 W
Rated Impedance 8 Ω
Sensitivity 92 dB (1 W, 1 m equivalent, measured at 4 m)
Frequency Response 80 - 18,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height)
Speaker Component 7 cm (2.8“) cone-type × 9
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 668.4 (H) × 115 (D) mm (3.31" × 26.31" × 4.53“)
Weight 4.4 kg (9.7 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206

The SR-H3L Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.

Specification  Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 360 W
Rated Impedance 8 Ω
Sensitivity 95 dB (1 W, 1 m equivalent, measured at 8 m)
Frequency Response 110 - 18,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜
Vertical: 0゜ (within the range of speaker height)
Speaker Component 7 cm (2.8“) cone-type × 16
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 1186.4 (H) × 115 (D) mm (3.31" × 46.71" × 4.53“)
Weight 7.6 kg (16.75 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206

SR-H3S Line Array Loudspeaker; Bass-reflex type; Continuous program: 360W; Sensitivity: 92dB; Directivity: Horizontal: 90°, Vertical: 20°

Specifications SR-H3S
Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 360W
Rated Impedance 8Ω
Sensitivity (1W,1m equivalent measured at 4m) 92dB
Frequency Response 90 – 17,000Hz (when using optional Digital processor)
Directivity Angle Horizontal: 90°, Vertical: 20° (within the range of speaker height)
Speaker Component 7cm (2.8“) cone-type × 16
Input Connector Removable input connector
Finish 
Enclosure MDF, white, urethane paint
Front grille Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 1177.2 (H) × 17 (D)mm (3.31" x 46.35" x 6.18“)
Weight 7.9kg (17.42 lb)
Option Extension plate: SR-EP3, Wall mounting bracket: SR-WB3, Wall tilt bracket: SR-TB3, Flying bracket: SR-FB3, Speaker stand adapter: SR-SA3, Speaker stand: ST-33B, Matching transformer: MT-S0301, Digital processor: DP-0206

• 85 Hz to 22 kHz frequency range (-10 dB)
• 50 watts continuous program power capacity
• 86 dB sensitivity (1W/1m)
• 8 ohms nominal impedance
• 3.5 kHz crossover frequency
• High-Impact Polystyrene (HIPS) enclosure
• Spring-loaded input terminals
• Dimensions (HxWxD): 193 mm x 140 mm x 111 mm (7.6 in x 5.5 in x 4.4 in)
• Net Weight: 1.8 kg (4 lb)