LD SYSTEMS LDSAT62 WOOFER Spare part woofer 6.5inch

Spare part woofer 6.5" for LD Sat 62 speaker

• Nominal Basket Diameter 6.5“, 165 mm
• Nominal Impedance 8 ohms
• Power Rating Watts 100 W / Music Program 200 W
• Resonance 118 Hz
• Usable Frequency Range 85 Hz - 6 kHz
• Sensitivity 93.6
• Magnet Weight 20 oz.
• Gap Height 0.25“, 6.35 mm
• Voice Coil Diameter 1.5“, 38.1 mm

• Resonant Frequency (fs) 118 Hz
• DC Resistance (Re) 7.2
• Coil Inductance (Le) 0.19 mH
• Mechanical Q (Qms) 5.68
• Electromagnetic Q (Qes) 0.60
• Total Q (Qts) 0.54
• Compliance Equivalent Volume (Vas) 5.8 liters / 0.2 cu. ft.
• Peak Diaphragm Displacement Volume (Vd) 44cc
• Mechanical Compliance of Suspension (Cms) 0.26 mm/N
• BL Product (BL) 8.0 T-M
• Diaphragm Mass inc. Airload (Mms) 7 grams
• Efficiency Bandwidth Product (EBP) 197 Maximum Linear Excursion (Xmax) 3.5 mm
• Surface Area of Cone (Sd) 126.7 cm²
• Maximum Mechanical Limit (Xlim) 4.0 mm

• Recommended Enclosure Volume Sealed 2.8-5.7 liters / 0.1-0.2 cu. ft. Vented 3.4-15.6 liters / 0.12-0.55 cu. ft.
• Overall Diameter 6.59“, 167.4 mm
• Baffle Hole Diameter 5.69“, 144.5 mm
• Front Sealing Gasket fitted as standard
• Rear Sealing Gasket fitted as standard
• Mounting Holes Diameter 0.23“, 5.7 mm
• Mounting Holes B.C.D. 6.06“, 154 mm
• Depth 2.8“, 71 mm

• Copper voice coil
• Polyimide former
• Ferrite magnet
• Vented and extended core
• Pressed steel basket
• Paper Cone
• Cloth cone edge
• Solid composition paper dust cap

B&C's 6NDL44 6-1/2" cast frame neodymium woofer is a lightweight, powerful choice for ultra-compact multi-way speaker systems. Its rubber half-roll edge and treated cone are engineered to handle high bass excursions without drama, while still allowing a clean, articulate sonic signature. The 6NDL44 is also suitable as the midrange element in medium efficiency 3-way applications.

• Woofer/midrange
• High-energy neodymium motor
• 400 watt continuous program power
• 1.7" copper voice coil on a polyimide former
• Smooth, extended frequency response
• 91.5 dB 1w/1m sensitivity

Nominal Specifications

    * Nominal Diameter 6“, 160 mm
    * Overall Diameter 7.34/6.37“, 186.5/162 mm
    * Bolt Circle Diameter 6.77“, 172 mm
    * Baffle Cutout Diameter 5.78“, 147 mm
    * Depth 3.43“, 87.2 mm
    * Flange and Gasket Thickness 0.29“, 7.5 mm


Electrical Specifications

    * Minimum Impedance 6.6 Ohm
    * Nominal Impedance 8 Ohm
    * Nominal Power Handling*** 150 W
    * Maximum Power Handling**** 300 W
    * Sensitivity (1W/1m) 97 dB
    * Frequency Range 100 - 5000 Hz
    * Voice Coil Diameter 5“, 52 mm
    * Winding Material Aluminium
    * Former Material Glass Fiber
    * Winding Depth 0.26“, 6.66 mm
    * Magnetic Gap Depth 0.24“, 6 mm
    * Flux Density 1.35 T


THIELE & SMALL Parameters

    * Resonant Frequency (fs) 100 Hz
    * DC Resistance (Re) 5.5 Ohm
    * BL Product (BL) 11.6 N/A
    * Diaphragm Mass inc. Airload (Mms) 13.5 grams
    * Mechanical Compliance of Suspension (Cms) 0.19 mm/N
    * Rms 0.96 Kg/s
    * Electromagnetic Q (Qes) 0.35
    * Mechanical Q (Qms) 8.80
    * Total Q (Qts) 0.33
    * Compliance Equivalent Volume (Vas) 0.20 ft³, 5.80 dm³
    * Surface Area of Cone (Sd) 5.82“², 147.8 cm²
    * Maximum Linear Excursion (Xmax)* 2.3 mm
    * Xdamage** 11.6 mm
    * Coil Inductance (Le) 0.28 mH
    * Diaphragm mass (Mmd) 12.7 g
    * Eta Zero 1.63 %

Notes

    * *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
    * **Maximum excursion before permanent damage
    * ***2 Hours Test According to AES 2-1984 Rev. 2003
    * ****Maximum power is defined as 3dB greater than nominal power