Content | Powerful, dynamic 2 x 8" Bandpass Subwoofer. Its compact dimensions permit unobtrusive placement of the subbass anywhere, either vertically or horizontally. A 2-channel power amplifier is all that is required to operate e.g. a subbass with up to 4 satellites. Sturdy MDF housing with textured finish.
Specifications 2 x 8" Bandpass Subwoofer:
- Model Name: LDSUB88
- Type: Bandpass
- Components:
- Woofer: 2 x 8" Custom Made
- Power Capacity (Cont./Peak): 2 x 100 W / 2 x 180 W
- Frequency Range: 40 Hz - 120 Hz
- SPL 1 W / 1 m: 92 dB
- Max SPL: 115 dB
- Impedance: 2 x 8 ohms
- Connectors:
- Input: Clamp-type
- Output: Clamp-type
- Cabinet Material: 15 mm MDF
- Cabinet Surface: Painting
- Dimensions: 450 x 500 x 520 mm
| The SUBLIME is an ultra compact passive 6.5' dual coil subwoofer that offers the ultimate blend of a compact size and deep, fat basses. Thanks to the built-in X-over, this subwoofer is the ideal partner for the MASK2 top speakers.
This thinnest subwoofer on the market (only 12 cm deep) allows for easy integration into any interior: on the wall (mounted with the included wall mounting brackets), behind curtains or even under furniture.Speaker and connection terminals are invisible when mounted on the wall using the included mounting brackets. It may look like a small heating radiator, but instead of heat, it will radiate musical vibes in your room.
The SUBLIME subwoofer has a built-in stereo X-over filter, thus eliminating the need for external filters. The X-over filter separates the high frequencies and sends them directly to the top speakers. Optionally, you can use the SUBLIME speaker in an active speaker setup, using an active filter and separate power amplifier. You can use the SUBLIME up to 200 Hz. |
The titanium diaphragm compression driver is mated to a 90 degree x 40 degree custom-designed horn. Internal electronics feature an over-built crossover network and overload protection. Connections are dual Neutrik Speakon and 1/4" jacks. With professional features, excellent sonic performance, and great value, Yamaha Club Concert Series loudspeakers deliver premium quality night after night.
The CW118V enclosure houses a powerful cast-frame 18" woofer with a frequency response of 30Hz - 2kHz. 600W program handling, 1,200W peak. Sensitivity: 96dB. 22“W x 32“H x 25“D. 71 lbs.
Yamaha CW118V 18" Club Concert Series Subwoofer Speaker Features:
- Tough, paintable exterior coating
- Cast-frame 18" woofer
- Frequency response of 30Hz-2kHz (-10dB)
- 600W program handling/1,200W peak
- Sensitivity: 96dB
- 22“W x 32“H x 25“D
|
The S8015 is an extremely compact, high output, band-pass subwoofer able to deliver tight and fast controlled bass response.
The new high power high sensitivity 15" woofer is the result of the latest RCF experience in sub-bass transducers and compact subwoofer design and manufacturing.
The band-pass configuration offers a significant acoustic impact resulting in a fast and controlled reproduction of the bass frequency range.
It is capable of a power of 1 kW RMS and able to deliver a MAx SPL in excess of 135 dB.
The cabinet's shape is unobtrusive rectangular low profile to be used under sofa or under limited height stages; the cabinet is constructed of Baltic Birch plywood and finished in a very resistant, textured black paint.
Rubber feet are also installed.
Applications
- Low Frequency Enhancement
- Under-sofa and under-stage constraints
- Music Enhancement
- Club-Bar Bass Enhancement
- Special Effects Reinforcement
- Entertainment Systems
- Live Music Reinforcement
- Small and Mid Club Sound Systems
- Infill Sub Bass Enhancement
- Auditoriums
- AV presentations
- Retail stores
Features |
---|
15" high-efficiency RCF Precision 4" voice-coil woofer with Inside/Outside Coil Technology | Bandpass woofer | 135 dB Max SPL | Response down to 43 Hz | Rectangular box enclosure |
Baltic Birch cabinet finished in a very resistant, textured black paint with rubber feet
Acoustical Specifications |
---|
Frequency Response -10 dB: | 43 Hz | ÷ 0.25 kHz | Max SPL @ 1m: | 135 dB | | System Sensitivity: | 99 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 800 Watt | | Peak Power Handling: | 2400 Watt | | Recommended Amplifier: | 1500 | |
TRANSDUCERS |
---|
Woofer: | 15" woofer, 4" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 900 Watts AES | | Sensitivity: | 97 dB | |
INPUT SECTION |
---|
Input connector: | Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Colour: | Black, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 310 / 12.20 mm/inch | | Width: | 900 / 35.43 mm/inch | | Depth: | 380 / 14.96 mm/inch | | Net Weight: | 23.4 / 51.58 Kg/Lbs |
|
|
The TX1181 is the perfect companion sub to the TX1122 and TX1152 for compact and portable performance. Using the proven EVS18S woofer, the TX1181 effortlessly provides the low-frequency energy needed to keep up with Tour X boxes, as well as many other EV loudspeaker products. The integrated, low-pass input filter allows for single amp drive, and the high-sensitivity and excellent power handling don\'t require a large, expensive amplifier to generate high SPL. The TX1181\'s unique Backbone grille not only looks great, but also provides greater strength and damage resistance than simple grille block designs. Proprietary, ergonomically correct handles and angled input panels, and integrated, screw-in-style pole-mount make the TX1181 easy to transport and employ in a variety of applications.
Specifications
Frequency Response (-3dB) |
50 - 160 Hz |
Frequency Response (-10dB) |
45 - 700 Hz |
Recommended High-Pass Frequency |
30 Hz |
Sensitivity 1W/1m |
100 dB |
Max. SPL / 1m (calc) |
132 dB |
System Power Handling (continuous/program/peak) |
500/1000/2000 Watts |
LF Transducer |
EVS18S |
Nominal Impedance (Passive) |
8 Ohms |
Minimum Impedance |
7.5 Ohms |
Enclosure Material |
Plywood and MDF with EVCOAT |
Color |
Black |
Flying |
No |
Input Connections |
Parallel Neutrik® NL4 |
Internal Crossover |
Yes |
Speaker Type |
Subs |
Weight Net |
33.8 kg ( 74.52 lbs ) |
Dimensions (HxWxD) |
769 x 439 x 591 mm (30.28" x 17.28" x 23.27“) |
| MQ 90S is a compact band-pass 8” subwoofer.
It can be connected through a removable Euroblock plug that allows the parallel connection of other loudspeakers.
The cabinet material is MDF with a scratch resistant surface.
The subwoofer has internally a transformer for constant voltage lines (100 or 70 V).
The power selection is made by means of its selector.
It is for indoor use only (avoid to use it in very humid places).
It should be put on the floor of a room where "satellite” loudspeakers (for mid / high frequencies) are already present. MQ 90S belongs to RCF Monitor Q series.
Acoustical Specifications |
Type Of Speaker: |
“band-pass" subwoofer |
|
Frequency Response: |
70 Hz |
÷ 220 kHz |
Max SPL @ 1m: |
107 dB |
|
Power Handling: |
60 Watt RMS |
|
Peak Power Handling: |
120 Watt PEAK |
|
System Sensitivity: |
89 dB |
|
Impedance: |
16 Ω |
|
Crossover frequencies: |
200 Hz |
|
INPUT SECTION |
Input connector: |
Removable 4 pole Euroblock |
|
Constant voltage: |
100 V, 70 V V |
|
Power Selection: |
60 - 30 - 15 - 7.5 W (100 V) |
|
CABINET |
Hardware: |
Material PVC |
|
Colour: |
White / Black |
|
PHYSICAL SPECIFICATIONS |
Height: |
300 / 11.81 |
|
Width: |
203 / 7.99 |
|
Depth: |
400 / 15.74 |
|
Net Weight: |
8.06 / 17.76 |
|
SHIPPING INFORMATION |
Package height: |
370 / 14.56 |
|
Package width: |
265 / 10.43 |
|
Package depth: |
470 / 18.50 |
|
Shipping Weight: |
9.24 / 20.59 |
|
Reviews
There are no reviews yet.