LD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone

108.04 incl. GR VAT

Available on backorder

EAN: 4049521087370
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 4-10 d. Available in 4-10 d. SKU: LDWS1000MW Category:
Battery disposal information [77,1 KB] Frequency lists / Pin assignment Wireless Systems [538,9 KB]

 

Read more

LDWS1000MW User User’s manual [7,20 MB]
LDWS1000MW Battery disposal informationLDWS1000MW Frequency listLDWS1000MW Frequency lists / Pin assignment Wireless SystemsLDWS1000MW Data sheet - Microphone for Brass/Wind/Percussioninstruments Wind / percussion instrument clip microphone

Linear frequency response, natural sound reproduction, lightweight, easy and stable positioning thanks to the gooseneck, very good impact sound isolation thanks to elastic capsule fastening, strong clamp providing good fastening without causing any damage to the instrument thanks to the soft rubber inner surface of the clips. Phantom Power Adapter LDPHA also available separately.

Specifications:

  • Converter Principle: Electret Condenser Microphone
  • Pick-up Pattern: Cardioid pattern
  • Frequency Response: 50 Hz – 18 kHz
  • SPL: 133 dB
  • Sensitivty: -45 dB +/- 3dB
  • Impedance: 250 Ohms +/- 30% @1kHz
  • Connections: Mini XLR – 3 pins
  • Gooseneck: 70 mm
  • Cable length: 1,5 m
  • Surface: Black matt
  • Weight: 56 g
  • Accessories: Wind protection, Phantom power adapter
Weight 0.35 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone removeSHURE KSM-141SL - Dual Pattern Instrument Microphone 20Hz to 20k removeSENNHEISER E-604 CARDIOID DYNAMIC MICROPHONE removeBEYERDYNAMIC M 88 TG Dynamic Microphone (Hypercardioid) removeShure DMK57-52 - Drum Mic Kit removeSENNHEISER E-609 Dynamic Microphone for Strings remove
NameLD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone removeSHURE KSM-141SL - Dual Pattern Instrument Microphone 20Hz to 20k removeSENNHEISER E-604 CARDIOID DYNAMIC MICROPHONE removeBEYERDYNAMIC M 88 TG Dynamic Microphone (Hypercardioid) removeShure DMK57-52 - Drum Mic Kit removeSENNHEISER E-609 Dynamic Microphone for Strings remove
Imagebeyerdynamaic m 88 tg dynamic hyperdioid microphone
SKULDWS1000MWKSM141SLH10SE00051M-88 TGDMK57-52H10SE00147
Rating
Price 108.04 incl. GR VAT 515.99 incl. GR VAT 115.00 incl. GR VAT 419.99 incl. GR VAT 627.00 incl. GR VAT 98.00 incl. GR VAT
Stock

Available on backorder

In stock

Available on backorder

In stock (can be backordered)

Only 1 left in stock (can be backordered)

In stock

AvailabilityAvailable on backorderIn stockAvailable on backorderIn stock (can be backordered)Only 1 left in stock (can be backordered)In stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Legendary, universal all purpose microphone classic
  • Perfectly suitable for stage and studio
  • Unbelievably rich sound
  • Made in germany
Content LDWS1000MW User User's manual [7,20 MB]
LDWS1000MW Battery disposal informationLDWS1000MW Frequency listLDWS1000MW Frequency lists / Pin assignment Wireless SystemsLDWS1000MW Data sheet - Microphone for Brass/Wind/Percussioninstruments Wind / percussion instrument clip microphone

Linear frequency response, natural sound reproduction, lightweight, easy and stable positioning thanks to the gooseneck, very good impact sound isolation thanks to elastic capsule fastening, strong clamp providing good fastening without causing any damage to the instrument thanks to the soft rubber inner surface of the clips. Phantom Power Adapter LDPHA also available separately.

Specifications:
  • Converter Principle: Electret Condenser Microphone
  • Pick-up Pattern: Cardioid pattern
  • Frequency Response: 50 Hz – 18 kHz
  • SPL: 133 dB
  • Sensitivty: -45 dB +/- 3dB
  • Impedance: 250 Ohms +/- 30% @1kHz
  • Connections: Mini XLR – 3 pins
  • Gooseneck: 70 mm
  • Cable length: 1,5 m
  • Surface: Black matt
  • Weight: 56 g
  • Accessories: Wind protection, Phantom power adapter
The Shure KSM141 is an end-addressed condenser microphone with mechanically switching dual polar patterns (cardioid and omnidirectional). Designed for studio use, yet rugged enough for live applications, the KSM141 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments. Features
  • A mechanical polar pattern switch for highly consistent cardioid and true omnidirectional polar patterns. Provides flexibility in a wide variety of recording applications
  • Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar? diaphragm for superior transient response
  • Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
  • Premium electronic components, including gold-plated internal and external connectors
  • Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
  • Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
  • Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
  • Three-position switchable low-frequency filter to reduce background noise and counteract proximity effect
Performance Characteristics
  • Extended frequency response
  • Low self noise
  • Exceptional reproduction of low-frequency sounds
  • Can withstand high sound pressure levels (SPL)
  • High output level
  • No crossover distortion
  • Uniform polar response
  • Superior common mode rejection and suppression of radio frequency interference
APPLICATIONS Some typical applications for the KSM141 are listed below. Microphone use, however, is a matter of personal taste. The KSM141 may be used for a variety of applications other than those listed.
  • Acoustic instruments -- such as piano, guitar, drums, percussion, strings
  • Wind instruments -- brass and woodwind
  • Low frequency instruments -- such as double bass, electric bass, kick drum
  • Overhead miking -- drums or percussion
  • Ensembles -- choral or orchestral
  • Room ambiance pick-up -- guitar amplifier or drums
Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application. Suggested Applications Acoustic Guitar Acoustic Bass Cymbals Brass/Woodwinds Orchestra Ensemble Vocals Piano Strings Room Ambience Live Recording
The e 604 is a cardioid microphone especially suitable for use with drums and brass instruments. Features Rugged reinforced glass-fibre body Low sensitivity to impact and handling noise Very high sound pressure handling capability Low distortion microphone Hum compensating coil Easy to position due to compact design Integral stand mount Delivery Includes 1 e 604 1 drum clip 1 pouch Technical Data Frequency Response  40.....18000 Hz Sensitivity in free field, no load (1kHz)  1,8 mV/Pa Min. terminating impedance  1000 Ohm Dimensions  d 33 x 59 mm Weight w/o cable  60 g

Technical Data

Transducer Type: Dynamic
Polar Pattern: Hypercardioid
Microphone Frequency Response: 30 - 20.000 Hz
Connection Type: XLR 3-pin

Made in Germany

Like all members of the M series, the M 88 TG is handcrafted in Germany. The materials and the precise craftsmanship that go into the microphone ultimately create a world-class product, a level of quality that turns an ordinary microphone purchase into a long-term investment.

 
Perfect for heavy bass Sources
The M 88 TG excels on the kick drum, saxophone and percussions, the result of a balanced sound profile and deep bass tones. It is a must-have for every microphone collection. And why shouldn’t it be when you consider its features? It is both insensitive to high sound pressure levels and feedback resistant thanks to its nearly perfect hypercardioid!  
Flexible tool iN The studio

The M 88 TG excels in the studio with the help of its multifaceted flexibility. No matter whether the job involves vocals, horns, guitar amplifiers or drums – the microphone is the perfect choice for the widest range of sources. It is all the result of its exceptionally broad frequency response and rich sound.

The DMK57-52 Drum Mic Kit is a conveniently packaged selection of microphones and mounts, designed to offer a complete core package of microphones for recording and performing drummers at a great price. The Drum Mic Kit includes three SM57 microphones, one Beta 52 microphone, three A56D drum-mounting systems, and a lightweight and durable carrying case.

  • The industry standard for snare drum, and a reliable and high-performing choice for toms, Shure's cardioid dynamic SM57 microphone features a contoured frequency response that cuts through the mix with exceptional impact, while reproducing sound accurately.

  • Perfect for the kick drum, the supercardioid Beta 52? derives its low-end punch and sonic presence from a carefully tailored frequency response. Equipped with its own pneumatic shock mount, the Beta 52 is additionally designed with an integral locking stand mount for quick-and-easy set up.

  • A key element of the kit, Shure's A56D universal drum mounting system can be used to position microphones virtually anywhere -- on drum rims, microphone stands, even cymbal stands. Designed with captive parts to prevent the loss of individual pieces, the A56D is small, secure, and can be used with any standard microphone, making it a great tool for both stage and studio environments.
  • The super-cardioid e 609 instrument microphone has been specially developed for miking guitar cabs face on and extremely close to the signal source.

    Pick-up pattern : Super-cardioid
    Frequency response : 40.....15000 Hz
    Sensitivity in free field, no load (1kHz) : 1,5 mV/Pa
    Nominal impedance : 350 Ohm
    Min. terminating impedance : 1000 Ohm
    Dimensions : 55 x 34 x 134 mm
    Weight : 140 g

    Weight0.35 kg0.50 kg0.10 kg0.600 kg2.00 kg0.14 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 0.35 kg
    Weight 0.50 kg
    Weight 0.10 kg
    Weight 0.600 kg
    Weight 2.00 kg
    Weight 0.14 kg