LD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone

108.04 incl. GR VAT

Available on backorder

EAN: 4049521087370
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 4-10 d. Available in 4-10 d. SKU: LDWS1000MW Category:
Battery disposal information [77,1 KB] Frequency lists / Pin assignment Wireless Systems [538,9 KB]

 

Read more

LDWS1000MW User User’s manual [7,20 MB]
LDWS1000MW Battery disposal informationLDWS1000MW Frequency listLDWS1000MW Frequency lists / Pin assignment Wireless SystemsLDWS1000MW Data sheet - Microphone for Brass/Wind/Percussioninstruments Wind / percussion instrument clip microphone

Linear frequency response, natural sound reproduction, lightweight, easy and stable positioning thanks to the gooseneck, very good impact sound isolation thanks to elastic capsule fastening, strong clamp providing good fastening without causing any damage to the instrument thanks to the soft rubber inner surface of the clips. Phantom Power Adapter LDPHA also available separately.

Specifications:

  • Converter Principle: Electret Condenser Microphone
  • Pick-up Pattern: Cardioid pattern
  • Frequency Response: 50 Hz – 18 kHz
  • SPL: 133 dB
  • Sensitivty: -45 dB +/- 3dB
  • Impedance: 250 Ohms +/- 30% @1kHz
  • Connections: Mini XLR – 3 pins
  • Gooseneck: 70 mm
  • Cable length: 1,5 m
  • Surface: Black matt
  • Weight: 56 g
  • Accessories: Wind protection, Phantom power adapter
Weight 0.35 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone removeSENNHEISER E-604 CARDIOID DYNAMIC MICROPHONE removeAKG C 451B B/ST Matched Pair removeSHURE PGA52-XLR - Kick Drum Microphone 30Hz to 13kHz removeSHURE Beta98HC - clip on condenser instrument mic removeNPG CB-410 Instrument Microphone 48V remove
NameLD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone removeSENNHEISER E-604 CARDIOID DYNAMIC MICROPHONE removeAKG C 451B B/ST Matched Pair removeSHURE PGA52-XLR - Kick Drum Microphone 30Hz to 13kHz removeSHURE Beta98HC - clip on condenser instrument mic removeNPG CB-410 Instrument Microphone 48V remove
Image
SKULDWS1000MWH10SE00051C 451B STEREO PAIRPGA52-XLRBETA98H/CCB-410
Rating
Price 108.04 incl. GR VAT 115.00 incl. GR VAT 917.03 incl. GR VAT 165.12 incl. GR VAT 241.91 incl. GR VAT 47.11 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Only 5 left in stock

Available on backorder

In stock

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderOnly 5 left in stockAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content LDWS1000MW User User's manual [7,20 MB]
LDWS1000MW Battery disposal informationLDWS1000MW Frequency listLDWS1000MW Frequency lists / Pin assignment Wireless SystemsLDWS1000MW Data sheet - Microphone for Brass/Wind/Percussioninstruments Wind / percussion instrument clip microphone

Linear frequency response, natural sound reproduction, lightweight, easy and stable positioning thanks to the gooseneck, very good impact sound isolation thanks to elastic capsule fastening, strong clamp providing good fastening without causing any damage to the instrument thanks to the soft rubber inner surface of the clips. Phantom Power Adapter LDPHA also available separately.

Specifications:
  • Converter Principle: Electret Condenser Microphone
  • Pick-up Pattern: Cardioid pattern
  • Frequency Response: 50 Hz – 18 kHz
  • SPL: 133 dB
  • Sensitivty: -45 dB +/- 3dB
  • Impedance: 250 Ohms +/- 30% @1kHz
  • Connections: Mini XLR – 3 pins
  • Gooseneck: 70 mm
  • Cable length: 1,5 m
  • Surface: Black matt
  • Weight: 56 g
  • Accessories: Wind protection, Phantom power adapter
The e 604 is a cardioid microphone especially suitable for use with drums and brass instruments. Features Rugged reinforced glass-fibre body Low sensitivity to impact and handling noise Very high sound pressure handling capability Low distortion microphone Hum compensating coil Easy to position due to compact design Integral stand mount Delivery Includes 1 e 604 1 drum clip 1 pouch Technical Data Frequency Response  40.....18000 Hz Sensitivity in free field, no load (1kHz)  1,8 mV/Pa Min. terminating impedance  1000 Ohm Dimensions  d 33 x 59 mm Weight w/o cable  60 g

Precise artistic work deserves precise artistic craftsmanship. A classic by now, the CMS Series CK 1 capsule from AKG was a best seller from the moment it was launched in 1969. Comprising a range of interchangeable capsules and preamps as well as then innovative, dedicated accessories, the CMS Series from AKG quickly became a legend. It was discontinued in 1993. Responding to growing demand from recording engineers, AKG decided to produce the C 451 B with identical acoustical behaviour of the popular original C 451 EB + CK 1 microphone again, with dramatically improved specifications and outstanding price/ performance. The capsule of the new version is fixed permanently to the preamp to eliminate the mechanical problems of the screw joint. Using an extremely light diaphragm, the new C 451 B is almost totally insensitive to handling noise. An all-metal body provides excellent protection from RF interference and the microphone is rugged enough to give excellent results even under very harsh conditions.

The C 451 B is an excellent tool for accurately capturing signals rich in transients such as drums, overhead miking, or other instruments with a percussive sound. The airy sound, high overload limit of the capsule and electronic circuitry, and improved engineering details of the C 451 B are a solid foundation for creating another legend.

The matched pairs consist of two microphones that are within 1 dB to each other in sensitivity and also within 1 dB to each other in the range of 200 Hz to 15,000 Hz of the individual frequency response when used in cardioid mode and are selected from a large quantity of individual microphones using the described criteria by using a proprietary computer program.

Using this matched pair for stereo recordings utilizing various techniques will provide for a good and stable balance without frequency-dependent shifting of the stereo panorama.

The kit includes all the standard accessories of the individual package along with a stereo bar and proof of performance charts in an attractive carrying case (Soundtool case, middle size).

Features:

  • Identical acoustics of the legendary CK 1.
  • Rugged construction.
  • Ruler-flat on-axis frequency response.
  • Precise, nearly frequency independent cardioid.
  • Extremely accurate signal transfer.
  • Transformerless output stage for minimum distortion at low frequencies.
  • Protected against electrostatic and magnetic interference.
  • Selectable 10-dB and 20-dB preattenuation pads.
  • Switchable highpass filter (75 Hz or 150 Hz, 12dB/octave).
  • Operates on phantom power to DIN/IEC between 12 V and 48 V.
  • Complete with SA 40 stand adapter and W 90 windscreen.
  • Each microphone comes with its own individual frequency response plot.

Specifications:

  • Polar pattern: Cardioid
  • Frequency range: 20 to 20,000 Hz
  • Sensitivity: 9 mV/Pa (-41 dBV)
  • Max. SPL: 135/145/155 dB (0/-10/-20 dB) (k=0,5%)
  • Equivalent noise level (CCIR 468-3): 29 dB
  • Equivalent noise level: 18 dB-A
  • Signal/noise ratio (A-weighted): 76 dB
  • Preattenuation pad: 0 dB, 10 dB, 20 dB selectable
  • Bass filter: Flat, 12 dB/octave at 75 or 150 Hz, selectable
  • Impedance: 1000 ohms
  • Supply voltage: 9 to 52 V phantom power to DIN 45596
  • Current consumption:

OVERVIEW

Cardioid dynamic kick drum mic with swivel mount and cable.

The PGA52 is a professional quality kick drum microphone with an updated industrial design that features a black metallic finish and grille offering an unobtrusive visual presence. Legendary Shure quality construction ensures exceptional performance in rigorous environments.

Additional design highlights include a swivel joint featuring a quick-release latch similar to bicycle component-locking technology for extremely quick and easy positioning.

FEATURES
  • Mountable microphone featuring swivel joint with quick-release latch for kick drum
  • Dynamic cartridge (does not require phantom power) with cardioid polar pattern
  • Tailored cartridge design for low-frequency clarity, including on bass amps
  • Includes PGA52, zipper pouch and user guide
  • XLR to XLR mic cable included

A high performance mini-condenser for sound reinforcement and recording. Great for instruments or drums. The ultra-uniform pickup pattern provides high gain before feedback and excellent rejection of unwanted noise.

Other features include:

  • Mew A98D flexible drum mount
  • SPL handling to 160dB
  • frequency response of 20 to 20,000Hz and included preamplifier
  • shock mount and windscreen

Type: Black Electret Condenser
Polar Pattern: Uni-Directional
Frequency: 50Hz-16KHz
Sensitivity: -45dB
Output Impedance: 250 Ohm
Mixer Phantom Power: +48V
Ideal for wind & string  musical instruments
Weight0.35 kg0.10 kg2.00 kg0.80 kg0.20 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.35 kg
Weight 0.10 kg
Weight 2.00 kg
Weight 0.80 kg
Weight 0.20 kg
Weight 1.00 kg